Merge branch 'stmmac'

Vince Bridgers says:

====================
net: stmmac: Correct socfpga init/exit and

This patch series adds platform specific init/exit code so that socfpga
suspend/resume works as expected, and corrects a minor issue detected by
cppcheck.

V2: Address review comments by adding a line break at end of function and
    structure declaration. Add another trivial cppcheck patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c

@@ -20,7 +20,9 @@
 #include <linux/of_net.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <linux/stmmac.h>
+#include "stmmac.h"
 
 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
@@ -34,6 +36,7 @@ struct socfpga_dwmac {
 	u32	reg_shift;
 	struct	device *dev;
 	struct regmap *sys_mgr_base_addr;
+	struct reset_control *stmmac_rst;
 };
 
 static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
@@ -43,6 +46,13 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
 	u32 reg_offset, reg_shift;
 	int ret;
 
+	dwmac->stmmac_rst = devm_reset_control_get(dev,
+						  STMMAC_RESOURCE_NAME);
+	if (IS_ERR(dwmac->stmmac_rst)) {
+		dev_info(dev, "Could not get reset control!\n");
+		return -EINVAL;
+	}
+
 	dwmac->interface = of_get_phy_mode(np);
 
 	sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
@@ -125,6 +135,65 @@ static void *socfpga_dwmac_probe(struct platform_device *pdev)
 	return dwmac;
 }
 
+static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv)
+{
+	struct socfpga_dwmac	*dwmac = priv;
+
+	/* On socfpga platform exit, assert and hold reset to the
+	 * enet controller - the default state after a hard reset.
+	 */
+	if (dwmac->stmmac_rst)
+		reset_control_assert(dwmac->stmmac_rst);
+}
+
+static int socfpga_dwmac_init(struct platform_device *pdev, void *priv)
+{
+	struct socfpga_dwmac	*dwmac = priv;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct stmmac_priv *stpriv = NULL;
+	int ret = 0;
+
+	if (ndev)
+		stpriv = netdev_priv(ndev);
+
+	/* Assert reset to the enet controller before changing the phy mode */
+	if (dwmac->stmmac_rst)
+		reset_control_assert(dwmac->stmmac_rst);
+
+	/* Setup the phy mode in the system manager registers according to
+	 * devicetree configuration
+	 */
+	ret = socfpga_dwmac_setup(dwmac);
+
+	/* Deassert reset for the phy configuration to be sampled by
+	 * the enet controller, and operation to start in requested mode
+	 */
+	if (dwmac->stmmac_rst)
+		reset_control_deassert(dwmac->stmmac_rst);
+
+	/* Before the enet controller is suspended, the phy is suspended.
+	 * This causes the phy clock to be gated. The enet controller is
+	 * resumed before the phy, so the clock is still gated "off" when
+	 * the enet controller is resumed. This code makes sure the phy
+	 * is "resumed" before reinitializing the enet controller since
+	 * the enet controller depends on an active phy clock to complete
+	 * a DMA reset. A DMA reset will "time out" if executed
+	 * with no phy clock input on the Synopsys enet controller.
+	 * Verified through Synopsys Case #8000711656.
+	 *
+	 * Note that the phy clock is also gated when the phy is isolated.
+	 * Phy "suspend" and "isolate" controls are located in phy basic
+	 * control register 0, and can be modified by the phy driver
+	 * framework.
+	 */
+	if (stpriv && stpriv->phydev)
+		phy_resume(stpriv->phydev);
+
+	return ret;
+}
+
 const struct stmmac_of_data socfpga_gmac_data = {
 	.setup = socfpga_dwmac_probe,
+	.init = socfpga_dwmac_init,
+	.exit = socfpga_dwmac_exit,
 };

drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c

@@ -320,11 +320,8 @@ static void dwmac1000_set_eee_timer(void __iomem *ioaddr, int ls, int tw)
 
 static void dwmac1000_ctrl_ane(void __iomem *ioaddr, bool restart)
 {
-	u32 value;
-
-	value = readl(ioaddr + GMAC_AN_CTRL);
 	/* auto negotiation enable and External Loopback enable */
-	value = GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_ELE;
+	u32 value = GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_ELE;
 
 	if (restart)
 		value |= GMAC_AN_CTRL_RAN;

drivers/net/ethernet/stmicro/stmmac/enh_desc.c

@@ -145,7 +145,7 @@ static void enh_desc_get_ext_status(void *data, struct stmmac_extra_stats *x,
 			x->rx_msg_type_delay_req++;
 		else if (p->des4.erx.msg_type == RDES_EXT_DELAY_RESP)
 			x->rx_msg_type_delay_resp++;
-		else if (p->des4.erx.msg_type == RDES_EXT_DELAY_REQ)
+		else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_REQ)
 			x->rx_msg_type_pdelay_req++;
 		else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_RESP)
 			x->rx_msg_type_pdelay_resp++;

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -2878,6 +2878,10 @@ int stmmac_suspend(struct net_device *ndev)
 		clk_disable_unprepare(priv->stmmac_clk);
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
+
+	priv->oldlink = 0;
+	priv->speed = 0;
+	priv->oldduplex = -1;
 	return 0;
 }