Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits)
  m68k: amiga - RTC platform device conversion
  m68k: amiga - Parallel port platform device conversion
  m68k: amiga - Serial port platform device conversion
  m68k: amiga - Mouse platform device conversion
  m68k: amiga - Keyboard platform device conversion
  m68k: amiga - Amiga Gayle IDE platform device conversion
  m68k: amiga - A4000T SCSI platform device conversion
  m68k/scsi: a3000 - Do not use legacy Scsi_Host.base
  m68k: amiga - A3000 SCSI platform device conversion
  m68k/scsi: gvp11 - Do not use legacy Scsi_Host.base
  m68k: amiga - GVP Series II SCSI zorro_driver conversion
  m68k/scsi: a2091 - Do not use legacy Scsi_Host.base
  m68k: amiga - A2091/A590 SCSI zorro_driver conversion
  m68k/scsi: mvme147 - Kill obsolete HOSTS_C logic
  m68k/scsi: a3000 - Kill a3000_scsiregs typedef
  m68k/scsi: gvp11 - Kill gvp11_scsiregs typedef
  m68k/scsi: a2091 - Kill a2091_scsiregs typedef
  m68k/scsi: gvp11 - Extract check_wd33c93()
  m68k/scsi: a3000 - Kill static global a3000_host
  m68k/scsi: mvme147 - Kill static global mvme147_host
  ...

arch/m68k/Kconfig

@@ -7,6 +7,7 @@ config M68K
 	default y
 	select HAVE_AOUT
 	select HAVE_IDE
+	select GENERIC_ATOMIC64
 
 config MMU
 	bool

arch/m68k/amiga/config.c

@@ -97,10 +97,6 @@ static void amiga_get_model(char *model);
 static void amiga_get_hardware_list(struct seq_file *m);
 /* amiga specific timer functions */
 static unsigned long amiga_gettimeoffset(void);
-static int a3000_hwclk(int, struct rtc_time *);
-static int a2000_hwclk(int, struct rtc_time *);
-static int amiga_set_clock_mmss(unsigned long);
-static unsigned int amiga_get_ss(void);
 extern void amiga_mksound(unsigned int count, unsigned int ticks);
 static void amiga_reset(void);
 extern void amiga_init_sound(void);
@@ -138,10 +134,6 @@ static struct {
 	}
 };
 
-static struct resource rtc_resource = {
-	.start = 0x00dc0000, .end = 0x00dcffff
-};
-
 static struct resource ram_resource[NUM_MEMINFO];
 
 
@@ -387,15 +379,6 @@ void __init config_amiga(void)
 	mach_get_model       = amiga_get_model;
 	mach_get_hardware_list = amiga_get_hardware_list;
 	mach_gettimeoffset   = amiga_gettimeoffset;
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		mach_hwclk         = a3000_hwclk;
-		rtc_resource.name = "A3000 RTC";
-		request_resource(&iomem_resource, &rtc_resource);
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		mach_hwclk         = a2000_hwclk;
-		rtc_resource.name = "A2000 RTC";
-		request_resource(&iomem_resource, &rtc_resource);
-	}
 
 	/*
 	 * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
@@ -404,8 +387,6 @@ void __init config_amiga(void)
 	 */
 	mach_max_dma_address = 0xffffffff;
 
-	mach_set_clock_mmss  = amiga_set_clock_mmss;
-	mach_get_ss          = amiga_get_ss;
 	mach_reset           = amiga_reset;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
 	mach_beep            = amiga_mksound;
@@ -530,161 +511,6 @@ static unsigned long amiga_gettimeoffset(void)
 	return ticks + offset;
 }
 
-static int a3000_hwclk(int op, struct rtc_time *t)
-{
-	tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
-	if (!op) { /* read */
-		t->tm_sec  = tod_3000.second1 * 10 + tod_3000.second2;
-		t->tm_min  = tod_3000.minute1 * 10 + tod_3000.minute2;
-		t->tm_hour = tod_3000.hour1   * 10 + tod_3000.hour2;
-		t->tm_mday = tod_3000.day1    * 10 + tod_3000.day2;
-		t->tm_wday = tod_3000.weekday;
-		t->tm_mon  = tod_3000.month1  * 10 + tod_3000.month2 - 1;
-		t->tm_year = tod_3000.year1   * 10 + tod_3000.year2;
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-	} else {
-		tod_3000.second1 = t->tm_sec / 10;
-		tod_3000.second2 = t->tm_sec % 10;
-		tod_3000.minute1 = t->tm_min / 10;
-		tod_3000.minute2 = t->tm_min % 10;
-		tod_3000.hour1   = t->tm_hour / 10;
-		tod_3000.hour2   = t->tm_hour % 10;
-		tod_3000.day1    = t->tm_mday / 10;
-		tod_3000.day2    = t->tm_mday % 10;
-		if (t->tm_wday != -1)
-			tod_3000.weekday = t->tm_wday;
-		tod_3000.month1  = (t->tm_mon + 1) / 10;
-		tod_3000.month2  = (t->tm_mon + 1) % 10;
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		tod_3000.year1   = t->tm_year / 10;
-		tod_3000.year2   = t->tm_year % 10;
-	}
-
-	tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-
-	return 0;
-}
-
-static int a2000_hwclk(int op, struct rtc_time *t)
-{
-	int cnt = 5;
-
-	tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
-
-	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
-		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-		udelay(70);
-		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-		--cnt;
-	}
-
-	if (!cnt)
-		printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n",
-			tod_2000.cntrl1);
-
-	if (!op) { /* read */
-		t->tm_sec  = tod_2000.second1     * 10 + tod_2000.second2;
-		t->tm_min  = tod_2000.minute1     * 10 + tod_2000.minute2;
-		t->tm_hour = (tod_2000.hour1 & 3) * 10 + tod_2000.hour2;
-		t->tm_mday = tod_2000.day1        * 10 + tod_2000.day2;
-		t->tm_wday = tod_2000.weekday;
-		t->tm_mon  = tod_2000.month1      * 10 + tod_2000.month2 - 1;
-		t->tm_year = tod_2000.year1       * 10 + tod_2000.year2;
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-
-		if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)) {
-			if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12)
-				t->tm_hour = 0;
-			else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12)
-				t->tm_hour += 12;
-		}
-	} else {
-		tod_2000.second1 = t->tm_sec / 10;
-		tod_2000.second2 = t->tm_sec % 10;
-		tod_2000.minute1 = t->tm_min / 10;
-		tod_2000.minute2 = t->tm_min % 10;
-		if (tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)
-			tod_2000.hour1 = t->tm_hour / 10;
-		else if (t->tm_hour >= 12)
-			tod_2000.hour1 = TOD2000_HOUR1_PM +
-				(t->tm_hour - 12) / 10;
-		else
-			tod_2000.hour1 = t->tm_hour / 10;
-		tod_2000.hour2   = t->tm_hour % 10;
-		tod_2000.day1    = t->tm_mday / 10;
-		tod_2000.day2    = t->tm_mday % 10;
-		if (t->tm_wday != -1)
-			tod_2000.weekday = t->tm_wday;
-		tod_2000.month1  = (t->tm_mon + 1) / 10;
-		tod_2000.month2  = (t->tm_mon + 1) % 10;
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		tod_2000.year1   = t->tm_year / 10;
-		tod_2000.year2   = t->tm_year % 10;
-	}
-
-	tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-
-	return 0;
-}
-
-static int amiga_set_clock_mmss(unsigned long nowtime)
-{
-	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
-		tod_3000.second1 = real_seconds / 10;
-		tod_3000.second2 = real_seconds % 10;
-		tod_3000.minute1 = real_minutes / 10;
-		tod_3000.minute2 = real_minutes % 10;
-
-		tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		int cnt = 5;
-
-		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-
-		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
-			tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-			udelay(70);
-			tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-			--cnt;
-		}
-
-		if (!cnt)
-			printk(KERN_INFO "set_clock_mmss: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1);
-
-		tod_2000.second1 = real_seconds / 10;
-		tod_2000.second2 = real_seconds % 10;
-		tod_2000.minute1 = real_minutes / 10;
-		tod_2000.minute2 = real_minutes % 10;
-
-		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-	}
-
-	return 0;
-}
-
-static unsigned int amiga_get_ss(void)
-{
-	unsigned int s;
-
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-		s = tod_3000.second1 * 10 + tod_3000.second2;
-		tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		s = tod_2000.second1 * 10 + tod_2000.second2;
-	}
-	return s;
-}
-
 static NORET_TYPE void amiga_reset(void)
     ATTRIB_NORET;
 

arch/m68k/amiga/platform.c

@@ -11,6 +11,7 @@
 #include <linux/zorro.h>
 
 #include <asm/amigahw.h>
+#include <asm/amigayle.h>
 
 
 #ifdef CONFIG_ZORRO
@@ -55,11 +56,77 @@ static int __init amiga_init_bus(void)
 
 subsys_initcall(amiga_init_bus);
 
-#endif /* CONFIG_ZORRO */
+
+static int z_dev_present(zorro_id id)
+{
+	unsigned int i;
+
+	for (i = 0; i < zorro_num_autocon; i++)
+		if (zorro_autocon[i].rom.er_Manufacturer == ZORRO_MANUF(id) &&
+		    zorro_autocon[i].rom.er_Product == ZORRO_PROD(id))
+			return 1;
+
+	return 0;
+}
+
+#else /* !CONFIG_ZORRO */
+
+static inline int z_dev_present(zorro_id id) { return 0; }
+
+#endif /* !CONFIG_ZORRO */
+
+
+static const struct resource a3000_scsi_resource __initconst = {
+	.start	= 0xdd0000,
+	.end	= 0xdd00ff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static const struct resource a4000t_scsi_resource __initconst = {
+	.start	= 0xdd0000,
+	.end	= 0xdd0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static const struct resource a1200_ide_resource __initconst = {
+	.start	= 0xda0000,
+	.end	= 0xda1fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a1200_ide_pdata __initconst = {
+	.base		= 0xda0000,
+	.irqport	= 0xda9000,
+	.explicit_ack	= 1,
+};
+
+
+static const struct resource a4000_ide_resource __initconst = {
+	.start	= 0xdd2000,
+	.end	= 0xdd3fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a4000_ide_pdata __initconst = {
+	.base		= 0xdd2020,
+	.irqport	= 0xdd3020,
+	.explicit_ack	= 0,
+};
+
+
+static const struct resource amiga_rtc_resource __initconst = {
+	.start	= 0x00dc0000,
+	.end	= 0x00dcffff,
+	.flags	= IORESOURCE_MEM,
+};
 
 
 static int __init amiga_init_devices(void)
 {
+	struct platform_device *pdev;
+
 	if (!MACH_IS_AMIGA)
 		return -ENODEV;
 
@@ -77,6 +144,53 @@ static int __init amiga_init_devices(void)
 	if (AMIGAHW_PRESENT(AMI_FLOPPY))
 		platform_device_register_simple("amiga-floppy", -1, NULL, 0);
 
+	if (AMIGAHW_PRESENT(A3000_SCSI))
+		platform_device_register_simple("amiga-a3000-scsi", -1,
+						&a3000_scsi_resource, 1);
+
+	if (AMIGAHW_PRESENT(A4000_SCSI))
+		platform_device_register_simple("amiga-a4000t-scsi", -1,
+						&a4000t_scsi_resource, 1);
+
+	if (AMIGAHW_PRESENT(A1200_IDE) ||
+	    z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) {
+		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+						       &a1200_ide_resource, 1);
+		platform_device_add_data(pdev, &a1200_ide_pdata,
+					 sizeof(a1200_ide_pdata));
+	}
+
+	if (AMIGAHW_PRESENT(A4000_IDE)) {
+		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+						       &a4000_ide_resource, 1);
+		platform_device_add_data(pdev, &a4000_ide_pdata,
+					 sizeof(a4000_ide_pdata));
+	}
+
+
+	/* other I/O hardware */
+	if (AMIGAHW_PRESENT(AMI_KEYBOARD))
+		platform_device_register_simple("amiga-keyboard", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_MOUSE))
+		platform_device_register_simple("amiga-mouse", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_SERIAL))
+		platform_device_register_simple("amiga-serial", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_PARALLEL))
+		platform_device_register_simple("amiga-parallel", -1, NULL, 0);
+
+
+	/* real time clocks */
+	if (AMIGAHW_PRESENT(A2000_CLK))
+		platform_device_register_simple("rtc-msm6242", -1,
+						&amiga_rtc_resource, 1);
+
+	if (AMIGAHW_PRESENT(A3000_CLK))
+		platform_device_register_simple("rtc-rp5c01", -1,
+						&amiga_rtc_resource, 1);
+
 	return 0;
 }
 

arch/m68k/include/asm/amigayle.h

@@ -104,4 +104,10 @@ struct GAYLE {
 #define GAYLE_CFG_250NS		0x00
 #define GAYLE_CFG_720NS		0x0c
 
+struct gayle_ide_platform_data {
+	unsigned long base;
+	unsigned long irqport;
+	int explicit_ack;	/* A1200 IDE needs explicit ack */
+};
+
 #endif /* asm-m68k/amigayle.h */

arch/m68k/include/asm/atomic.h

@@ -3,3 +3,5 @@
 #else
 #include "atomic_mm.h"
 #endif
+
+#include <asm-generic/atomic64.h>

arch/m68k/include/asm/cache.h

@@ -8,4 +8,6 @@
 #define        L1_CACHE_SHIFT  4
 #define        L1_CACHE_BYTES  (1<< L1_CACHE_SHIFT)
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 #endif

drivers/char/amiserial.c

@@ -84,6 +84,7 @@ static char *serial_version = "4.30";
 #include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
+#include <linux/platform_device.h>
 
 #include <asm/setup.h>
 
@@ -1954,29 +1955,16 @@ static const struct tty_operations serial_ops = {
 /*
  * The serial driver boot-time initialization code!
  */
-static int __init rs_init(void)
+static int __init amiga_serial_probe(struct platform_device *pdev)
 {
 	unsigned long flags;
 	struct serial_state * state;
 	int error;
 
-	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_SERIAL))
-		return -ENODEV;
-
 	serial_driver = alloc_tty_driver(1);
 	if (!serial_driver)
 		return -ENOMEM;
 
-	/*
-	 *  We request SERDAT and SERPER only, because the serial registers are
-	 *  too spreaded over the custom register space
-	 */
-	if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4,
-				"amiserial [Paula]")) {
-		error = -EBUSY;
-		goto fail_put_tty_driver;
-	}
-
 	IRQ_ports = NULL;
 
 	show_serial_version();
@@ -1998,7 +1986,7 @@ static int __init rs_init(void)
 
 	error = tty_register_driver(serial_driver);
 	if (error)
-		goto fail_release_mem_region;
+		goto fail_put_tty_driver;
 
 	state = rs_table;
 	state->magic = SSTATE_MAGIC;
@@ -2050,23 +2038,24 @@ static int __init rs_init(void)
 	ciab.ddra |= (SER_DTR | SER_RTS);   /* outputs */
 	ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR);  /* inputs */
 
+	platform_set_drvdata(pdev, state);
+
 	return 0;
 
 fail_free_irq:
 	free_irq(IRQ_AMIGA_TBE, state);
 fail_unregister:
 	tty_unregister_driver(serial_driver);
-fail_release_mem_region:
-	release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
 fail_put_tty_driver:
 	put_tty_driver(serial_driver);
 	return error;
 }
 
-static __exit void rs_exit(void) 
+static int __exit amiga_serial_remove(struct platform_device *pdev)
 {
 	int error;
-	struct async_struct *info = rs_table[0].info;
+	struct serial_state *state = platform_get_drvdata(pdev);
+	struct async_struct *info = state->info;
 
 	/* printk("Unloading %s: version %s\n", serial_name, serial_version); */
 	tasklet_kill(&info->tlet);
@@ -2075,19 +2064,38 @@ static __exit void rs_exit(void)
 		       error);
 	put_tty_driver(serial_driver);
 
-	if (info) {
-	  rs_table[0].info = NULL;
-	  kfree(info);
-	}
+	rs_table[0].info = NULL;
+	kfree(info);
 
 	free_irq(IRQ_AMIGA_TBE, rs_table);
 	free_irq(IRQ_AMIGA_RBF, rs_table);
 
-	release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
+	platform_set_drvdata(pdev, NULL);
+
+	return error;
+}
+
+static struct platform_driver amiga_serial_driver = {
+	.remove = __exit_p(amiga_serial_remove),
+	.driver   = {
+		.name	= "amiga-serial",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init amiga_serial_init(void)
+{
+	return platform_driver_probe(&amiga_serial_driver, amiga_serial_probe);
+}
+
+module_init(amiga_serial_init);
+
+static void __exit amiga_serial_exit(void)
+{
+	platform_driver_unregister(&amiga_serial_driver);
 }
 
-module_init(rs_init)
-module_exit(rs_exit)
+module_exit(amiga_serial_exit);
 
 
 #if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE)
@@ -2154,3 +2162,4 @@ console_initcall(amiserial_console_init);
 #endif /* CONFIG_SERIAL_CONSOLE && !MODULE */
 
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-serial");

drivers/ide/gayle.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/zorro.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 
 #include <asm/setup.h>
 #include <asm/amigahw.h>
@@ -23,15 +24,6 @@
 #include <asm/amigayle.h>
 
 
-    /*
-     *  Bases of the IDE interfaces
-     */
-
-#define GAYLE_BASE_4000	0xdd2020	/* A4000/A4000T */
-#define GAYLE_BASE_1200	0xda0000	/* A1200/A600 and E-Matrix 530 */
-
-#define GAYLE_IDEREG_SIZE	0x2000
-
     /*
      *  Offsets from one of the above bases
      */
@@ -68,20 +60,20 @@ MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
 
 static int gayle_test_irq(ide_hwif_t *hwif)
 {
-    unsigned char ch;
+	unsigned char ch;
 
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & GAYLE_IRQ_IDE))
-	return 0;
-    return 1;
+	ch = z_readb(hwif->io_ports.irq_addr);
+	if (!(ch & GAYLE_IRQ_IDE))
+		return 0;
+	return 1;
 }
 
 static void gayle_a1200_clear_irq(ide_drive_t *drive)
 {
-    ide_hwif_t *hwif = drive->hwif;
+	ide_hwif_t *hwif = drive->hwif;
 
-    (void)z_readb(hwif->io_ports.status_addr);
-    z_writeb(0x7c, hwif->io_ports.irq_addr);
+	(void)z_readb(hwif->io_ports.status_addr);
+	z_writeb(0x7c, hwif->io_ports.irq_addr);
 }
 
 static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
@@ -122,64 +114,89 @@ static const struct ide_port_info gayle_port_info = {
      *  Probe for a Gayle IDE interface (and optionally for an IDE doubler)
      */
 
-static int __init gayle_init(void)
+static int __init amiga_gayle_ide_probe(struct platform_device *pdev)
 {
-    unsigned long phys_base, res_start, res_n;
-    unsigned long base, ctrlport, irqport;
-    int a4000, i, rc;
-    struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
-    struct ide_port_info d = gayle_port_info;
-
-    if (!MACH_IS_AMIGA)
-	return -ENODEV;
-
-    if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE))
-	goto found;
-
-#ifdef CONFIG_ZORRO
-    if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE,
-			  NULL))
-	goto found;
-#endif
-    return -ENODEV;
-
-found:
-	printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n",
-			 a4000 ? 4000 : 1200,
-			 ide_doubler ? ", IDE doubler" : "");
-
-	if (a4000) {
-	    phys_base = GAYLE_BASE_4000;
-	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
-	    d.port_ops = &gayle_a4000_port_ops;
-	} else {
-	    phys_base = GAYLE_BASE_1200;
-	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
-	    d.port_ops = &gayle_a1200_port_ops;
+	struct resource *res;
+	struct gayle_ide_platform_data *pdata;
+	unsigned long base, ctrlport, irqport;
+	unsigned int i;
+	int error;
+	struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
+	struct ide_port_info d = gayle_port_info;
+	struct ide_host *host;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	if (!request_mem_region(res->start, resource_size(res), "IDE"))
+		return -EBUSY;
+
+	pdata = pdev->dev.platform_data;
+	pr_info("ide: Gayle IDE controller (A%u style%s)\n",
+		pdata->explicit_ack ? 1200 : 4000,
+		ide_doubler ? ", IDE doubler" : "");
+
+	base = (unsigned long)ZTWO_VADDR(pdata->base);
+	ctrlport = 0;
+	irqport = (unsigned long)ZTWO_VADDR(pdata->irqport);
+	if (pdata->explicit_ack)
+		d.port_ops = &gayle_a1200_port_ops;
+	else
+		d.port_ops = &gayle_a4000_port_ops;
+
+	for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) {
+		if (GAYLE_HAS_CONTROL_REG)
+			ctrlport = base + GAYLE_CONTROL;
+
+		gayle_setup_ports(&hw[i], base, ctrlport, irqport);
+		hws[i] = &hw[i];
 	}
 
-	res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
-	res_n = GAYLE_IDEREG_SIZE;
+	error = ide_host_add(&d, hws, i, &host);
+	if (error)
+		goto out;
 
-	if (!request_mem_region(res_start, res_n, "IDE"))
-		return -EBUSY;
+	platform_set_drvdata(pdev, host);
+	return 0;
 
-    for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
-	base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
-	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
+out:
+	release_mem_region(res->start, resource_size(res));
+	return error;
+}
+
+static int __exit amiga_gayle_ide_remove(struct platform_device *pdev)
+{
+	struct ide_host *host = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	ide_host_remove(host);
+	release_mem_region(res->start, resource_size(res));
+	return 0;
+}
 
-	gayle_setup_ports(&hw[i], base, ctrlport, irqport);
+static struct platform_driver amiga_gayle_ide_driver = {
+	.remove = __exit_p(amiga_gayle_ide_remove),
+	.driver   = {
+		.name	= "amiga-gayle-ide",
+		.owner	= THIS_MODULE,
+	},
+};
 
-	hws[i] = &hw[i];
-    }
+static int __init amiga_gayle_ide_init(void)
+{
+	return platform_driver_probe(&amiga_gayle_ide_driver,
+				     amiga_gayle_ide_probe);
+}
 
-    rc = ide_host_add(&d, hws, i, NULL);
-    if (rc)
-	release_mem_region(res_start, res_n);
+module_init(amiga_gayle_ide_init);
 
-    return rc;
+static void __exit amiga_gayle_ide_exit(void)
+{
+	platform_driver_unregister(&amiga_gayle_ide_driver);
 }
 
-module_init(gayle_init);
+module_exit(amiga_gayle_ide_exit);
 
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-gayle-ide");

drivers/input/keyboard/amikbd.c

@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/keyboard.h>
+#include <linux/platform_device.h>
 
 #include <asm/amigaints.h>
 #include <asm/amigahw.h>
@@ -154,10 +155,9 @@ static const char *amikbd_messages[8] = {
 	[7] = KERN_WARNING "amikbd: keyboard interrupt\n"
 };
 
-static struct input_dev *amikbd_dev;
-
-static irqreturn_t amikbd_interrupt(int irq, void *dummy)
+static irqreturn_t amikbd_interrupt(int irq, void *data)
 {
+	struct input_dev *dev = data;
 	unsigned char scancode, down;
 
 	scancode = ~ciaa.sdr;		/* get and invert scancode (keyboard is active low) */
@@ -170,47 +170,42 @@ static irqreturn_t amikbd_interrupt(int irq, void *dummy)
 
 	if (scancode < 0x78) {		/* scancodes < 0x78 are keys */
 		if (scancode == 98) {	/* CapsLock is a toggle switch key on Amiga */
-			input_report_key(amikbd_dev, scancode, 1);
-			input_report_key(amikbd_dev, scancode, 0);
+			input_report_key(dev, scancode, 1);
+			input_report_key(dev, scancode, 0);
 		} else {
-			input_report_key(amikbd_dev, scancode, down);
+			input_report_key(dev, scancode, down);
 		}
 
-		input_sync(amikbd_dev);
+		input_sync(dev);
 	} else				/* scancodes >= 0x78 are error codes */
 		printk(amikbd_messages[scancode - 0x78]);
 
 	return IRQ_HANDLED;
 }
 
-static int __init amikbd_init(void)
+static int __init amikbd_probe(struct platform_device *pdev)
 {
+	struct input_dev *dev;
 	int i, j, err;
 
-	if (!AMIGAHW_PRESENT(AMI_KEYBOARD))
-		return -ENODEV;
-
-	if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
-		return -EBUSY;
-
-	amikbd_dev = input_allocate_device();
-	if (!amikbd_dev) {
-		printk(KERN_ERR "amikbd: not enough memory for input device\n");
-		err = -ENOMEM;
-		goto fail1;
+	dev = input_allocate_device();
+	if (!dev) {
+		dev_err(&pdev->dev, "Not enough memory for input device\n");
+		return -ENOMEM;
 	}
 
-	amikbd_dev->name = "Amiga Keyboard";
-	amikbd_dev->phys = "amikbd/input0";
-	amikbd_dev->id.bustype = BUS_AMIGA;
-	amikbd_dev->id.vendor = 0x0001;
-	amikbd_dev->id.product = 0x0001;
-	amikbd_dev->id.version = 0x0100;
+	dev->name = pdev->name;
+	dev->phys = "amikbd/input0";
+	dev->id.bustype = BUS_AMIGA;
+	dev->id.vendor = 0x0001;
+	dev->id.product = 0x0001;
+	dev->id.version = 0x0100;
+	dev->dev.parent = &pdev->dev;
 
-	amikbd_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
 
 	for (i = 0; i < 0x78; i++)
-		set_bit(i, amikbd_dev->keybit);
+		set_bit(i, dev->keybit);
 
 	for (i = 0; i < MAX_NR_KEYMAPS; i++) {
 		static u_short temp_map[NR_KEYS] __initdata;
@@ -229,30 +224,54 @@ static int __init amikbd_init(void)
 		memcpy(key_maps[i], temp_map, sizeof(temp_map));
 	}
 	ciaa.cra &= ~0x41;	 /* serial data in, turn off TA */
-	if (request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
-			amikbd_interrupt)) {
-		err = -EBUSY;
+	err = request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
+			  dev);
+	if (err)
 		goto fail2;
-	}
 
-	err = input_register_device(amikbd_dev);
+	err = input_register_device(dev);
 	if (err)
 		goto fail3;
 
+	platform_set_drvdata(pdev, dev);
+
 	return 0;
 
- fail3:	free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
- fail2:	input_free_device(amikbd_dev);
- fail1:	release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
+ fail3:	free_irq(IRQ_AMIGA_CIAA_SP, dev);
+ fail2:	input_free_device(dev);
 	return err;
 }
 
-static void __exit amikbd_exit(void)
+static int __exit amikbd_remove(struct platform_device *pdev)
+{
+	struct input_dev *dev = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	free_irq(IRQ_AMIGA_CIAA_SP, dev);
+	input_unregister_device(dev);
+	return 0;
+}
+
+static struct platform_driver amikbd_driver = {
+	.remove = __exit_p(amikbd_remove),
+	.driver   = {
+		.name	= "amiga-keyboard",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init amikbd_init(void)
 {
-	free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
-	input_unregister_device(amikbd_dev);
-	release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
+	return platform_driver_probe(&amikbd_driver, amikbd_probe);
 }
 
 module_init(amikbd_init);
+
+static void __exit amikbd_exit(void)
+{
+	platform_driver_unregister(&amikbd_driver);
+}
+
 module_exit(amikbd_exit);
+
+MODULE_ALIAS("platform:amiga-keyboard");

drivers/input/mouse/amimouse.c

@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -34,10 +35,10 @@ MODULE_DESCRIPTION("Amiga mouse driver");
 MODULE_LICENSE("GPL");
 
 static int amimouse_lastx, amimouse_lasty;
-static struct input_dev *amimouse_dev;
 
-static irqreturn_t amimouse_interrupt(int irq, void *dummy)
+static irqreturn_t amimouse_interrupt(int irq, void *data)
 {
+	struct input_dev *dev = data;
 	unsigned short joy0dat, potgor;
 	int nx, ny, dx, dy;
 
@@ -59,14 +60,14 @@ static irqreturn_t amimouse_interrupt(int irq, void *dummy)
 
 	potgor = amiga_custom.potgor;
 
-	input_report_rel(amimouse_dev, REL_X, dx);
-	input_report_rel(amimouse_dev, REL_Y, dy);
+	input_report_rel(dev, REL_X, dx);
+	input_report_rel(dev, REL_Y, dy);
 
-	input_report_key(amimouse_dev, BTN_LEFT,   ciaa.pra & 0x40);
-	input_report_key(amimouse_dev, BTN_MIDDLE, potgor & 0x0100);
-	input_report_key(amimouse_dev, BTN_RIGHT,  potgor & 0x0400);
+	input_report_key(dev, BTN_LEFT,   ciaa.pra & 0x40);
+	input_report_key(dev, BTN_MIDDLE, potgor & 0x0100);
+	input_report_key(dev, BTN_RIGHT,  potgor & 0x0400);
 
-	input_sync(amimouse_dev);
+	input_sync(dev);
 
 	return IRQ_HANDLED;
 }
@@ -74,63 +75,90 @@ static irqreturn_t amimouse_interrupt(int irq, void *dummy)
 static int amimouse_open(struct input_dev *dev)
 {
 	unsigned short joy0dat;
+	int error;
 
 	joy0dat = amiga_custom.joy0dat;
 
 	amimouse_lastx = joy0dat & 0xff;
 	amimouse_lasty = joy0dat >> 8;
 
-	if (request_irq(IRQ_AMIGA_VERTB, amimouse_interrupt, 0, "amimouse", amimouse_interrupt)) {
-                printk(KERN_ERR "amimouse.c: Can't allocate irq %d\n", IRQ_AMIGA_VERTB);
-                return -EBUSY;
-        }
+	error = request_irq(IRQ_AMIGA_VERTB, amimouse_interrupt, 0, "amimouse",
+			    dev);
+	if (error)
+		dev_err(&dev->dev, "Can't allocate irq %d\n", IRQ_AMIGA_VERTB);
 
-        return 0;
+	return error;
 }
 
 static void amimouse_close(struct input_dev *dev)
 {
-	free_irq(IRQ_AMIGA_VERTB, amimouse_interrupt);
+	free_irq(IRQ_AMIGA_VERTB, dev);
 }
 
-static int __init amimouse_init(void)
+static int __init amimouse_probe(struct platform_device *pdev)
 {
 	int err;
+	struct input_dev *dev;
 
-	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
-		return -ENODEV;
-
-	amimouse_dev = input_allocate_device();
-	if (!amimouse_dev)
+	dev = input_allocate_device();
+	if (!dev)
 		return -ENOMEM;
 
-	amimouse_dev->name = "Amiga mouse";
-	amimouse_dev->phys = "amimouse/input0";
-	amimouse_dev->id.bustype = BUS_AMIGA;
-	amimouse_dev->id.vendor = 0x0001;
-	amimouse_dev->id.product = 0x0002;
-	amimouse_dev->id.version = 0x0100;
+	dev->name = pdev->name;
+	dev->phys = "amimouse/input0";
+	dev->id.bustype = BUS_AMIGA;
+	dev->id.vendor = 0x0001;
+	dev->id.product = 0x0002;
+	dev->id.version = 0x0100;
 
-	amimouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
-	amimouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
-	amimouse_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
+	dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+	dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+	dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
 		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
-	amimouse_dev->open = amimouse_open;
-	amimouse_dev->close = amimouse_close;
+	dev->open = amimouse_open;
+	dev->close = amimouse_close;
+	dev->dev.parent = &pdev->dev;
 
-	err = input_register_device(amimouse_dev);
+	err = input_register_device(dev);
 	if (err) {
-		input_free_device(amimouse_dev);
+		input_free_device(dev);
 		return err;
 	}
 
+	platform_set_drvdata(pdev, dev);
+
 	return 0;
 }
 
-static void __exit amimouse_exit(void)
+static int __exit amimouse_remove(struct platform_device *pdev)
 {
-        input_unregister_device(amimouse_dev);
+	struct input_dev *dev = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	input_unregister_device(dev);
+	return 0;
+}
+
+static struct platform_driver amimouse_driver = {
+	.remove = __exit_p(amimouse_remove),
+	.driver   = {
+		.name	= "amiga-mouse",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init amimouse_init(void)
+{
+	return platform_driver_probe(&amimouse_driver, amimouse_probe);
 }
 
 module_init(amimouse_init);
+
+static void __exit amimouse_exit(void)
+{
+	platform_driver_unregister(&amimouse_driver);
+}
+
 module_exit(amimouse_exit);
+
+MODULE_ALIAS("platform:amiga-mouse");

drivers/parport/parport_amiga.c

@@ -18,6 +18,8 @@
 #include <linux/parport.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
 #include <asm/setup.h>
 #include <asm/amigahw.h>
 #include <asm/irq.h>
@@ -31,7 +33,6 @@
 #define DPRINTK(x...)	do { } while (0)
 #endif
 
-static struct parport *this_port = NULL;
 
 static void amiga_write_data(struct parport *p, unsigned char data)
 {
@@ -227,18 +228,11 @@ static struct parport_operations pp_amiga_ops = {
 
 /* ----------- Initialisation code --------------------------------- */
 
-static int __init parport_amiga_init(void)
+static int __init amiga_parallel_probe(struct platform_device *pdev)
 {
 	struct parport *p;
 	int err;
 
-	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_PARALLEL))
-		return -ENODEV;
-
-	err = -EBUSY;
-	if (!request_mem_region(CIAA_PHYSADDR-1+0x100, 0x100, "parallel"))
-		goto out_mem;
-
 	ciaa.ddrb = 0xff;
 	ciab.ddra &= 0xf8;
 	mb();
@@ -246,41 +240,63 @@ static int __init parport_amiga_init(void)
 	p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
 				   PARPORT_DMA_NONE, &pp_amiga_ops);
 	if (!p)
-		goto out_port;
+		return -EBUSY;
 
-	err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name, p);
+	err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name,
+			  p);
 	if (err)
 		goto out_irq;
 
-	this_port = p;
 	printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
 	/* XXX: set operating mode */
 	parport_announce_port(p);
 
+	platform_set_drvdata(pdev, p);
+
 	return 0;
 
 out_irq:
 	parport_put_port(p);
-out_port:
-	release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
-out_mem:
 	return err;
 }
 
-static void __exit parport_amiga_exit(void)
+static int __exit amiga_parallel_remove(struct platform_device *pdev)
+{
+	struct parport *port = platform_get_drvdata(pdev);
+
+	parport_remove_port(port);
+	if (port->irq != PARPORT_IRQ_NONE)
+		free_irq(IRQ_AMIGA_CIAA_FLG, port);
+	parport_put_port(port);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver amiga_parallel_driver = {
+	.remove = __exit_p(amiga_parallel_remove),
+	.driver   = {
+		.name	= "amiga-parallel",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init amiga_parallel_init(void)
+{
+	return platform_driver_probe(&amiga_parallel_driver,
+				     amiga_parallel_probe);
+}
+
+module_init(amiga_parallel_init);
+
+static void __exit amiga_parallel_exit(void)
 {
-	parport_remove_port(this_port);
-	if (this_port->irq != PARPORT_IRQ_NONE)
-		free_irq(IRQ_AMIGA_CIAA_FLG, this_port);
-	parport_put_port(this_port);
-	release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
+	platform_driver_unregister(&amiga_parallel_driver);
 }
 
+module_exit(amiga_parallel_exit);
 
 MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
 MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
 MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
 MODULE_LICENSE("GPL");
-
-module_init(parport_amiga_init)
-module_exit(parport_amiga_exit)
+MODULE_ALIAS("platform:amiga-parallel");

drivers/scsi/a2091.c

 #include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/zorro.h>
 
-#include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/amigaints.h>
 #include <asm/amigahw.h>
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <linux/spinlock.h>
 
 #include "scsi.h"
-#include <scsi/scsi_host.h>
 #include "wd33c93.h"
 #include "a2091.h"
 
-#include <linux/stat.h>
-
 
-static int a2091_release(struct Scsi_Host *instance);
+struct a2091_hostdata {
+	struct WD33C93_hostdata wh;
+	struct a2091_scsiregs *regs;
+};
 
 static irqreturn_t a2091_intr(int irq, void *data)
 {
 	struct Scsi_Host *instance = data;
-	a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base);
-	unsigned int status = regs->ISTR;
+	struct a2091_hostdata *hdata = shost_priv(instance);
+	unsigned int status = hdata->regs->ISTR;
 	unsigned long flags;
 
 	if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS))
@@ -43,38 +40,39 @@ static irqreturn_t a2091_intr(int irq, void *data)
 static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 {
 	struct Scsi_Host *instance = cmd->device->host;
-	struct WD33C93_hostdata *hdata = shost_priv(instance);
-	a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base);
+	struct a2091_hostdata *hdata = shost_priv(instance);
+	struct WD33C93_hostdata *wh = &hdata->wh;
+	struct a2091_scsiregs *regs = hdata->regs;
 	unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
 	unsigned long addr = virt_to_bus(cmd->SCp.ptr);
 
 	/* don't allow DMA if the physical address is bad */
 	if (addr & A2091_XFER_MASK) {
-		hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
-		hdata->dma_bounce_buffer = kmalloc(hdata->dma_bounce_len,
-						   GFP_KERNEL);
+		wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
+		wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
+						GFP_KERNEL);
 
 		/* can't allocate memory; use PIO */
-		if (!hdata->dma_bounce_buffer) {
-			hdata->dma_bounce_len = 0;
+		if (!wh->dma_bounce_buffer) {
+			wh->dma_bounce_len = 0;
 			return 1;
 		}
 
 		/* get the physical address of the bounce buffer */
-		addr = virt_to_bus(hdata->dma_bounce_buffer);
+		addr = virt_to_bus(wh->dma_bounce_buffer);
 
 		/* the bounce buffer may not be in the first 16M of physmem */
 		if (addr & A2091_XFER_MASK) {
 			/* we could use chipmem... maybe later */
-			kfree(hdata->dma_bounce_buffer);
-			hdata->dma_bounce_buffer = NULL;
-			hdata->dma_bounce_len = 0;
+			kfree(wh->dma_bounce_buffer);
+			wh->dma_bounce_buffer = NULL;
+			wh->dma_bounce_len = 0;
 			return 1;
 		}
 
 		if (!dir_in) {
 			/* copy to bounce buffer for a write */
-			memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr,
+			memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
 			       cmd->SCp.this_residual);
 		}
 	}
@@ -84,7 +82,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 		cntr |= CNTR_DDIR;
 
 	/* remember direction */
-	hdata->dma_dir = dir_in;
+	wh->dma_dir = dir_in;
 
 	regs->CNTR = cntr;
 
@@ -108,20 +106,21 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
 		     int status)
 {
-	struct WD33C93_hostdata *hdata = shost_priv(instance);
-	a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base);
+	struct a2091_hostdata *hdata = shost_priv(instance);
+	struct WD33C93_hostdata *wh = &hdata->wh;
+	struct a2091_scsiregs *regs = hdata->regs;
 
 	/* disable SCSI interrupts */
 	unsigned short cntr = CNTR_PDMD;
 
-	if (!hdata->dma_dir)
+	if (!wh->dma_dir)
 		cntr |= CNTR_DDIR;
 
 	/* disable SCSI interrupts */
 	regs->CNTR = cntr;
 
 	/* flush if we were reading */
-	if (hdata->dma_dir) {
+	if (wh->dma_dir) {
 		regs->FLUSH = 1;
 		while (!(regs->ISTR & ISTR_FE_FLG))
 			;
@@ -137,95 +136,37 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
 	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
 
 	/* copy from a bounce buffer, if necessary */
-	if (status && hdata->dma_bounce_buffer) {
-		if (hdata->dma_dir)
-			memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer,
+	if (status && wh->dma_bounce_buffer) {
+		if (wh->dma_dir)
+			memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
 			       SCpnt->SCp.this_residual);
-		kfree(hdata->dma_bounce_buffer);
-		hdata->dma_bounce_buffer = NULL;
-		hdata->dma_bounce_len = 0;
-	}
-}
-
-static int __init a2091_detect(struct scsi_host_template *tpnt)
-{
-	static unsigned char called = 0;
-	struct Scsi_Host *instance;
-	unsigned long address;
-	struct zorro_dev *z = NULL;
-	wd33c93_regs wdregs;
-	a2091_scsiregs *regs;
-	struct WD33C93_hostdata *hdata;
-	int num_a2091 = 0;
-
-	if (!MACH_IS_AMIGA || called)
-		return 0;
-	called = 1;
-
-	tpnt->proc_name = "A2091";
-	tpnt->proc_info = &wd33c93_proc_info;
-
-	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
-		if (z->id != ZORRO_PROD_CBM_A590_A2091_1 &&
-		    z->id != ZORRO_PROD_CBM_A590_A2091_2)
-			continue;
-		address = z->resource.start;
-		if (!request_mem_region(address, 256, "wd33c93"))
-			continue;
-
-		instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
-		if (instance == NULL)
-			goto release;
-		instance->base = ZTWO_VADDR(address);
-		instance->irq = IRQ_AMIGA_PORTS;
-		instance->unique_id = z->slotaddr;
-		regs = (a2091_scsiregs *)(instance->base);
-		regs->DAWR = DAWR_A2091;
-		wdregs.SASR = &regs->SASR;
-		wdregs.SCMD = &regs->SCMD;
-		hdata = shost_priv(instance);
-		hdata->no_sync = 0xff;
-		hdata->fast = 0;
-		hdata->dma_mode = CTRL_DMA;
-		wd33c93_init(instance, wdregs, dma_setup, dma_stop,
-			     WD33C93_FS_8_10);
-		if (request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
-				"A2091 SCSI", instance))
-			goto unregister;
-		regs->CNTR = CNTR_PDMD | CNTR_INTEN;
-		num_a2091++;
-		continue;
-
-unregister:
-		scsi_unregister(instance);
-release:
-		release_mem_region(address, 256);
+		kfree(wh->dma_bounce_buffer);
+		wh->dma_bounce_buffer = NULL;
+		wh->dma_bounce_len = 0;
 	}
-
-	return num_a2091;
 }
 
 static int a2091_bus_reset(struct scsi_cmnd *cmd)
 {
+	struct Scsi_Host *instance = cmd->device->host;
+
 	/* FIXME perform bus-specific reset */
 
 	/* FIXME 2: kill this function, and let midlayer fall back
 	   to the same action, calling wd33c93_host_reset() */
 
-	spin_lock_irq(cmd->device->host->host_lock);
+	spin_lock_irq(instance->host_lock);
 	wd33c93_host_reset(cmd);
-	spin_unlock_irq(cmd->device->host->host_lock);
+	spin_unlock_irq(instance->host_lock);
 
 	return SUCCESS;
 }
 
-#define HOSTS_C
-
-static struct scsi_host_template driver_template = {
-	.proc_name		= "A2901",
+static struct scsi_host_template a2091_scsi_template = {
+	.module			= THIS_MODULE,
 	.name			= "Commodore A2091/A590 SCSI",
-	.detect			= a2091_detect,
-	.release		= a2091_release,
+	.proc_info		= wd33c93_proc_info,
+	.proc_name		= "A2901",
 	.queuecommand		= wd33c93_queuecommand,
 	.eh_abort_handler	= wd33c93_abort,
 	.eh_bus_reset_handler	= a2091_bus_reset,
@@ -237,19 +178,103 @@ static struct scsi_host_template driver_template = {
 	.use_clustering		= DISABLE_CLUSTERING
 };
 
+static int __devinit a2091_probe(struct zorro_dev *z,
+				 const struct zorro_device_id *ent)
+{
+	struct Scsi_Host *instance;
+	int error;
+	struct a2091_scsiregs *regs;
+	wd33c93_regs wdregs;
+	struct a2091_hostdata *hdata;
 
-#include "scsi_module.c"
+	if (!request_mem_region(z->resource.start, 256, "wd33c93"))
+		return -EBUSY;
 
-static int a2091_release(struct Scsi_Host *instance)
+	instance = scsi_host_alloc(&a2091_scsi_template,
+				   sizeof(struct a2091_hostdata));
+	if (!instance) {
+		error = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	instance->irq = IRQ_AMIGA_PORTS;
+	instance->unique_id = z->slotaddr;
+
+	regs = (struct a2091_scsiregs *)ZTWO_VADDR(z->resource.start);
+	regs->DAWR = DAWR_A2091;
+
+	wdregs.SASR = &regs->SASR;
+	wdregs.SCMD = &regs->SCMD;
+
+	hdata = shost_priv(instance);
+	hdata->wh.no_sync = 0xff;
+	hdata->wh.fast = 0;
+	hdata->wh.dma_mode = CTRL_DMA;
+	hdata->regs = regs;
+
+	wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10);
+	error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
+			    "A2091 SCSI", instance);
+	if (error)
+		goto fail_irq;
+
+	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+
+	error = scsi_add_host(instance, NULL);
+	if (error)
+		goto fail_host;
+
+	zorro_set_drvdata(z, instance);
+
+	scsi_scan_host(instance);
+	return 0;
+
+fail_host:
+	free_irq(IRQ_AMIGA_PORTS, instance);
+fail_irq:
+	scsi_host_put(instance);
+fail_alloc:
+	release_mem_region(z->resource.start, 256);
+	return error;
+}
+
+static void __devexit a2091_remove(struct zorro_dev *z)
 {
-#ifdef MODULE
-	a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base);
+	struct Scsi_Host *instance = zorro_get_drvdata(z);
+	struct a2091_hostdata *hdata = shost_priv(instance);
 
-	regs->CNTR = 0;
-	release_mem_region(ZTWO_PADDR(instance->base), 256);
+	hdata->regs->CNTR = 0;
+	scsi_remove_host(instance);
 	free_irq(IRQ_AMIGA_PORTS, instance);
-#endif
-	return 1;
+	scsi_host_put(instance);
+	release_mem_region(z->resource.start, 256);
+}
+
+static struct zorro_device_id a2091_zorro_tbl[] __devinitdata = {
+	{ ZORRO_PROD_CBM_A590_A2091_1 },
+	{ ZORRO_PROD_CBM_A590_A2091_2 },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(zorro, a2091_zorro_tbl);
+
+static struct zorro_driver a2091_driver = {
+	.name		= "a2091",
+	.id_table	= a2091_zorro_tbl,
+	.probe		= a2091_probe,
+	.remove		= __devexit_p(a2091_remove),
+};
+
+static int __init a2091_init(void)
+{
+	return zorro_register_driver(&a2091_driver);
+}
+module_init(a2091_init);
+
+static void __exit a2091_exit(void)
+{
+	zorro_unregister_driver(&a2091_driver);
 }
+module_exit(a2091_exit);
 
+MODULE_DESCRIPTION("Commodore A2091/A590 SCSI");
 MODULE_LICENSE("GPL");

drivers/scsi/a2091.h

@@ -25,7 +25,7 @@
  */
 #define A2091_XFER_MASK		(0xff000001)
 
-typedef struct {
+struct a2091_scsiregs {
 		 unsigned char	pad1[64];
 	volatile unsigned short	ISTR;
 	volatile unsigned short	CNTR;
@@ -44,7 +44,7 @@ typedef struct {
 	volatile unsigned short	CINT;
 		 unsigned char	pad7[2];
 	volatile unsigned short	FLUSH;
-} a2091_scsiregs;
+};
 
 #define DAWR_A2091		(3)
 

drivers/scsi/a3000.h

@@ -25,7 +25,7 @@
  */
 #define A3000_XFER_MASK		(0x00000003)
 
-typedef struct {
+struct a3000_scsiregs {
 		 unsigned char	pad1[2];
 	volatile unsigned short	DAWR;
 	volatile unsigned int	WTC;
@@ -46,7 +46,7 @@ typedef struct {
 	volatile unsigned char	SASR;
 		 unsigned char	pad9;
 	volatile unsigned char	SCMD;
-} a3000_scsiregs;
+};
 
 #define DAWR_A3000		(3)
 

drivers/scsi/a4000t.c

@@ -20,10 +20,6 @@
 
 #include "53c700.h"
 
-MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>");
-MODULE_DESCRIPTION("Amiga A4000T NCR53C710 driver");
-MODULE_LICENSE("GPL");
-
 
 static struct scsi_host_template a4000t_scsi_driver_template = {
 	.name		= "A4000T builtin SCSI",
@@ -32,30 +28,35 @@ static struct scsi_host_template a4000t_scsi_driver_template = {
 	.module		= THIS_MODULE,
 };
 
-static struct platform_device *a4000t_scsi_device;
 
-#define A4000T_SCSI_ADDR 0xdd0040
+#define A4000T_SCSI_OFFSET	0x40
 
-static int __devinit a4000t_probe(struct platform_device *dev)
+static int __init amiga_a4000t_scsi_probe(struct platform_device *pdev)
 {
-	struct Scsi_Host *host;
+	struct resource *res;
+	phys_addr_t scsi_addr;
 	struct NCR_700_Host_Parameters *hostdata;
+	struct Scsi_Host *host;
 
-	if (!(MACH_IS_AMIGA && AMIGAHW_PRESENT(A4000_SCSI)))
-		goto out;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
 
-	if (!request_mem_region(A4000T_SCSI_ADDR, 0x1000,
+	if (!request_mem_region(res->start, resource_size(res),
 				"A4000T builtin SCSI"))
-		goto out;
+		return -EBUSY;
 
-	hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
+	hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters),
+			   GFP_KERNEL);
 	if (!hostdata) {
-		printk(KERN_ERR "a4000t-scsi: Failed to allocate host data\n");
+		dev_err(&pdev->dev, "Failed to allocate host data\n");
 		goto out_release;
 	}
 
+	scsi_addr = res->start + A4000T_SCSI_OFFSET;
+
 	/* Fill in the required pieces of hostdata */
-	hostdata->base = (void __iomem *)ZTWO_VADDR(A4000T_SCSI_ADDR);
+	hostdata->base = (void __iomem *)ZTWO_VADDR(scsi_addr);
 	hostdata->clock = 50;
 	hostdata->chip710 = 1;
 	hostdata->dmode_extra = DMODE_FC2;
@@ -63,26 +64,25 @@ static int __devinit a4000t_probe(struct platform_device *dev)
 
 	/* and register the chip */
 	host = NCR_700_detect(&a4000t_scsi_driver_template, hostdata,
-			      &dev->dev);
+			      &pdev->dev);
 	if (!host) {
-		printk(KERN_ERR "a4000t-scsi: No host detected; "
-				"board configuration problem?\n");
+		dev_err(&pdev->dev,
+			"No host detected; board configuration problem?\n");
 		goto out_free;
 	}
 
 	host->this_id = 7;
-	host->base = A4000T_SCSI_ADDR;
+	host->base = scsi_addr;
 	host->irq = IRQ_AMIGA_PORTS;
 
 	if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "a4000t-scsi",
 			host)) {
-		printk(KERN_ERR "a4000t-scsi: request_irq failed\n");
+		dev_err(&pdev->dev, "request_irq failed\n");
 		goto out_put_host;
 	}
 
-	platform_set_drvdata(dev, host);
+	platform_set_drvdata(pdev, host);
 	scsi_scan_host(host);
-
 	return 0;
 
  out_put_host:
@@ -90,58 +90,49 @@ static int __devinit a4000t_probe(struct platform_device *dev)
  out_free:
 	kfree(hostdata);
  out_release:
-	release_mem_region(A4000T_SCSI_ADDR, 0x1000);
- out:
+	release_mem_region(res->start, resource_size(res));
 	return -ENODEV;
 }
 
-static __devexit int a4000t_device_remove(struct platform_device *dev)
+static int __exit amiga_a4000t_scsi_remove(struct platform_device *pdev)
 {
-	struct Scsi_Host *host = platform_get_drvdata(dev);
+	struct Scsi_Host *host = platform_get_drvdata(pdev);
 	struct NCR_700_Host_Parameters *hostdata = shost_priv(host);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	scsi_remove_host(host);
-
 	NCR_700_release(host);
 	kfree(hostdata);
 	free_irq(host->irq, host);
-	release_mem_region(A4000T_SCSI_ADDR, 0x1000);
-
+	release_mem_region(res->start, resource_size(res));
 	return 0;
 }
 
-static struct platform_driver a4000t_scsi_driver = {
-	.driver = {
-		.name           = "a4000t-scsi",
-		.owner          = THIS_MODULE,
+static struct platform_driver amiga_a4000t_scsi_driver = {
+	.remove = __exit_p(amiga_a4000t_scsi_remove),
+	.driver   = {
+		.name	= "amiga-a4000t-scsi",
+		.owner	= THIS_MODULE,
 	},
-	.probe          = a4000t_probe,
-	.remove         = __devexit_p(a4000t_device_remove),
 };
 
-static int __init a4000t_scsi_init(void)
+static int __init amiga_a4000t_scsi_init(void)
 {
-	int err;
-
-	err = platform_driver_register(&a4000t_scsi_driver);
-	if (err)
-		return err;
-
-	a4000t_scsi_device = platform_device_register_simple("a4000t-scsi",
-			-1, NULL, 0);
-	if (IS_ERR(a4000t_scsi_device)) {
-		platform_driver_unregister(&a4000t_scsi_driver);
-		return PTR_ERR(a4000t_scsi_device);
-	}
-
-	return err;
+	return platform_driver_probe(&amiga_a4000t_scsi_driver,
+				     amiga_a4000t_scsi_probe);
 }
 
-static void __exit a4000t_scsi_exit(void)
+module_init(amiga_a4000t_scsi_init);
+
+static void __exit amiga_a4000t_scsi_exit(void)
 {
-	platform_device_unregister(a4000t_scsi_device);
-	platform_driver_unregister(&a4000t_scsi_driver);
+	platform_driver_unregister(&amiga_a4000t_scsi_driver);
 }
 
-module_init(a4000t_scsi_init);
-module_exit(a4000t_scsi_exit);
+module_exit(amiga_a4000t_scsi_exit);
+
+MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / "
+	      "Kars de Jong <jongk@linux-m68k.org>");
+MODULE_DESCRIPTION("Amiga A4000T NCR53C710 driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-a4000t-scsi");

drivers/scsi/gvp11.h

@@ -11,9 +11,6 @@
 
 #include <linux/types.h>
 
-int gvp11_detect(struct scsi_host_template *);
-int gvp11_release(struct Scsi_Host *);
-
 #ifndef CMD_PER_LUN
 #define CMD_PER_LUN		2
 #endif
@@ -22,15 +19,13 @@ int gvp11_release(struct Scsi_Host *);
 #define CAN_QUEUE		16
 #endif
 
-#ifndef HOSTS_C
-
 /*
  * if the transfer address ANDed with this results in a non-zero
  * result, then we can't use DMA.
  */
 #define GVP11_XFER_MASK		(0xff000001)
 
-typedef struct {
+struct gvp11_scsiregs {
 		 unsigned char	pad1[64];
 	volatile unsigned short	CNTR;
 		 unsigned char	pad2[31];
@@ -46,7 +41,7 @@ typedef struct {
 	volatile unsigned short	SP_DMA;
 	volatile unsigned short	secret2; /* store 1 here */
 	volatile unsigned short	secret3; /* store 15 here */
-} gvp11_scsiregs;
+};
 
 /* bits in CNTR */
 #define GVP11_DMAC_BUSY		(1<<0)
@@ -54,6 +49,4 @@ typedef struct {
 #define GVP11_DMAC_INT_ENABLE	(1<<3)
 #define GVP11_DMAC_DIR_WRITE	(1<<4)
 
-#endif /* else def HOSTS_C */
-
 #endif /* GVP11_H */

drivers/scsi/mvme147.c

@@ -16,12 +16,12 @@
 #include <linux/stat.h>
 
 
-static struct Scsi_Host *mvme147_host = NULL;
-
-static irqreturn_t mvme147_intr(int irq, void *dummy)
+static irqreturn_t mvme147_intr(int irq, void *data)
 {
+	struct Scsi_Host *instance = data;
+
 	if (irq == MVME147_IRQ_SCSI_PORT)
-		wd33c93_intr(mvme147_host);
+		wd33c93_intr(instance);
 	else
 		m147_pcc->dma_intr = 0x89;	/* Ack and enable ints */
 	return IRQ_HANDLED;
@@ -29,7 +29,8 @@ static irqreturn_t mvme147_intr(int irq, void *dummy)
 
 static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 {
-	struct WD33C93_hostdata *hdata = shost_priv(mvme147_host);
+	struct Scsi_Host *instance = cmd->device->host;
+	struct WD33C93_hostdata *hdata = shost_priv(instance);
 	unsigned char flags = 0x01;
 	unsigned long addr = virt_to_bus(cmd->SCp.ptr);
 
@@ -66,6 +67,7 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
 int mvme147_detect(struct scsi_host_template *tpnt)
 {
 	static unsigned char called = 0;
+	struct Scsi_Host *instance;
 	wd33c93_regs regs;
 	struct WD33C93_hostdata *hdata;
 
@@ -76,25 +78,25 @@ int mvme147_detect(struct scsi_host_template *tpnt)
 	tpnt->proc_name = "MVME147";
 	tpnt->proc_info = &wd33c93_proc_info;
 
-	mvme147_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
-	if (!mvme147_host)
+	instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
+	if (!instance)
 		goto err_out;
 
-	mvme147_host->base = 0xfffe4000;
-	mvme147_host->irq = MVME147_IRQ_SCSI_PORT;
+	instance->base = 0xfffe4000;
+	instance->irq = MVME147_IRQ_SCSI_PORT;
 	regs.SASR = (volatile unsigned char *)0xfffe4000;
 	regs.SCMD = (volatile unsigned char *)0xfffe4001;
-	hdata = shost_priv(mvme147_host);
+	hdata = shost_priv(instance);
 	hdata->no_sync = 0xff;
 	hdata->fast = 0;
 	hdata->dma_mode = CTRL_DMA;
-	wd33c93_init(mvme147_host, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
+	wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
 
 	if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
-			"MVME147 SCSI PORT", mvme147_intr))
+			"MVME147 SCSI PORT", instance))
 		goto err_unregister;
 	if (request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
-			"MVME147 SCSI DMA", mvme147_intr))
+			"MVME147 SCSI DMA", instance))
 		goto err_free_irq;
 #if 0	/* Disabled; causes problems booting */
 	m147_pcc->scsi_interrupt = 0x10;	/* Assert SCSI bus reset */
@@ -113,7 +115,7 @@ int mvme147_detect(struct scsi_host_template *tpnt)
 err_free_irq:
 	free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr);
 err_unregister:
-	scsi_unregister(mvme147_host);
+	scsi_unregister(instance);
 err_out:
 	return 0;
 }
@@ -132,9 +134,6 @@ static int mvme147_bus_reset(struct scsi_cmnd *cmd)
 	return SUCCESS;
 }
 
-#define HOSTS_C
-
-#include "mvme147.h"
 
 static struct scsi_host_template driver_template = {
 	.proc_name		= "MVME147",