Commit a9b6b256 authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville

ath9k_hw: turn a few big macros into functions

RF_BANK_SETUP, REG_WRITE_RF_ARRAY and REG_WRITE_ARRAY are way too big,
so they shouldn't be inlined at every single callsite, especially since they
can easily be turned into real functions.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ca7a4deb
......@@ -44,6 +44,34 @@ static const int m1ThreshExt_off = 127;
static const int m2ThreshExt_off = 127;
static void ar5008_rf_bank_setup(u32 *bank, struct ar5416IniArray *array,
int col)
{
int i;
for (i = 0; i < array->ia_rows; i++)
bank[i] = INI_RA(array, i, col);
}
#define REG_WRITE_RF_ARRAY(iniarray, regData, regWr) \
ar5008_write_rf_array(ah, iniarray, regData, &(regWr))
static void ar5008_write_rf_array(struct ath_hw *ah, struct ar5416IniArray *array,
u32 *data, unsigned int *writecnt)
{
int r;
ENABLE_REGWRITE_BUFFER(ah);
for (r = 0; r < array->ia_rows; r++) {
REG_WRITE(ah, INI_RA(array, r, 0), data[r]);
DO_DELAY(*writecnt);
}
REGWRITE_BUFFER_FLUSH(ah);
}
/**
* ar5008_hw_phy_modify_rx_buffer() - perform analog swizzling of parameters
* @rfbuf:
......@@ -530,16 +558,16 @@ static bool ar5008_hw_set_rf_regs(struct ath_hw *ah,
eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV);
/* Setup Bank 0 Write */
RF_BANK_SETUP(ah->analogBank0Data, &ah->iniBank0, 1);
ar5008_rf_bank_setup(ah->analogBank0Data, &ah->iniBank0, 1);
/* Setup Bank 1 Write */
RF_BANK_SETUP(ah->analogBank1Data, &ah->iniBank1, 1);
ar5008_rf_bank_setup(ah->analogBank1Data, &ah->iniBank1, 1);
/* Setup Bank 2 Write */
RF_BANK_SETUP(ah->analogBank2Data, &ah->iniBank2, 1);
ar5008_rf_bank_setup(ah->analogBank2Data, &ah->iniBank2, 1);
/* Setup Bank 6 Write */
RF_BANK_SETUP(ah->analogBank3Data, &ah->iniBank3,
ar5008_rf_bank_setup(ah->analogBank3Data, &ah->iniBank3,
modesIndex);
{
int i;
......@@ -569,7 +597,7 @@ static bool ar5008_hw_set_rf_regs(struct ath_hw *ah,
}
/* Setup Bank 7 Setup */
RF_BANK_SETUP(ah->analogBank7Data, &ah->iniBank7, 1);
ar5008_rf_bank_setup(ah->analogBank7Data, &ah->iniBank7, 1);
/* Write Analog registers */
REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data,
......
......@@ -130,6 +130,20 @@ bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
}
EXPORT_SYMBOL(ath9k_hw_wait);
void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array,
int column, unsigned int *writecnt)
{
int r;
ENABLE_REGWRITE_BUFFER(ah);
for (r = 0; r < array->ia_rows; r++) {
REG_WRITE(ah, INI_RA(array, r, 0),
INI_RA(array, r, column));
DO_DELAY(*writecnt);
}
REGWRITE_BUFFER_FLUSH(ah);
}
u32 ath9k_hw_reverse_bits(u32 val, u32 n)
{
u32 retval;
......
......@@ -106,16 +106,8 @@
udelay(1); \
} while (0)
#define REG_WRITE_ARRAY(iniarray, column, regWr) do { \
int r; \
ENABLE_REGWRITE_BUFFER(ah); \
for (r = 0; r < ((iniarray)->ia_rows); r++) { \
REG_WRITE(ah, INI_RA((iniarray), (r), 0), \
INI_RA((iniarray), r, (column))); \
DO_DELAY(regWr); \
} \
REGWRITE_BUFFER_FLUSH(ah); \
} while (0)
#define REG_WRITE_ARRAY(iniarray, column, regWr) \
ath9k_hw_write_array(ah, iniarray, column, &(regWr))
#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0
#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
......@@ -913,6 +905,8 @@ void ath9k_hw_antdiv_comb_conf_set(struct ath_hw *ah,
/* General Operation */
bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array,
int column, unsigned int *writecnt);
u32 ath9k_hw_reverse_bits(u32 val, u32 n);
bool ath9k_get_channel_edges(struct ath_hw *ah, u16 flags, u16 *low, u16 *high);
u16 ath9k_hw_computetxtime(struct ath_hw *ah,
......
......@@ -38,27 +38,11 @@
#define AR_PHY_CLC_Q0 0x0000ffd0
#define AR_PHY_CLC_Q0_S 5
#define REG_WRITE_RF_ARRAY(iniarray, regData, regWr) do { \
int r; \
ENABLE_REGWRITE_BUFFER(ah); \
for (r = 0; r < ((iniarray)->ia_rows); r++) { \
REG_WRITE(ah, INI_RA((iniarray), r, 0), (regData)[r]); \
DO_DELAY(regWr); \
} \
REGWRITE_BUFFER_FLUSH(ah); \
} while (0)
#define ANTSWAP_AB 0x0001
#define REDUCE_CHAIN_0 0x00000050
#define REDUCE_CHAIN_1 0x00000051
#define AR_PHY_CHIP_ID 0x9818
#define RF_BANK_SETUP(_bank, _iniarray, _col) do { \
int i; \
for (i = 0; i < (_iniarray)->ia_rows; i++) \
(_bank)[i] = INI_RA((_iniarray), i, _col);; \
} while (0)
#define AR_PHY_TIMING11_SPUR_FREQ_SD 0x3FF00000
#define AR_PHY_TIMING11_SPUR_FREQ_SD_S 20
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment