staging: comedi: ni_daq_700: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/ni_daq_700.c

@@ -109,14 +109,31 @@ static int daq700_dio_insn_config(struct comedi_device *dev,
 	return insn->n;
 }
 
+static int daq700_ai_eoc(struct comedi_device *dev,
+			 struct comedi_subdevice *s,
+			 struct comedi_insn *insn,
+			 unsigned long context)
+{
+	unsigned int status;
+
+	status = inb(dev->iobase + STA_R2);
+	if ((status & 0x03))
+		return -EOVERFLOW;
+	status = inb(dev->iobase + STA_R1);
+	if ((status & 0x02))
+		return -ENODATA;
+	if ((status & 0x11) == 0x01)
+		return 0;
+	return -EBUSY;
+}
+
 static int daq700_ai_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s,
 			   struct comedi_insn *insn, unsigned int *data)
 {
-	int n, i, chan;
+	int n, chan;
 	int d;
-	unsigned int status;
-	enum { TIMEOUT = 100 };
+	int ret;
 
 	chan = CR_CHAN(insn->chanspec);
 	/* write channel to multiplexer */
@@ -130,30 +147,26 @@ static int daq700_ai_rinsn(struct comedi_device *dev,
 		outb(0x30, dev->iobase + CMO_R); /* mode 0 out0 L, from H */
 		/* mode 1 out0 H, L to H, start conversion */
 		outb(0x32, dev->iobase + CMO_R);
+
 		/* wait for conversion to end */
-		for (i = 0; i < TIMEOUT; i++) {
-			status = inb(dev->iobase + STA_R2);
-			if ((status & 0x03) != 0) {
+		ret = comedi_timeout(dev, s, insn, daq700_ai_eoc, 0);
+		if (ret) {
+			switch (ret) {
+			case -EOVERFLOW:
 				dev_info(dev->class_dev,
 					 "Overflow/run Error\n");
-				return -EOVERFLOW;
-			}
-			status = inb(dev->iobase + STA_R1);
-			if ((status & 0x02) != 0) {
+				break;
+			case -ENODATA:
 				dev_info(dev->class_dev, "Data Error\n");
-				return -ENODATA;
-			}
-			if ((status & 0x11) == 0x01) {
-				/* ADC conversion complete */
+				break;
+			default:
+				dev_info(dev->class_dev,
+					 "timeout during ADC conversion\n");
 				break;
 			}
-			udelay(1);
-		}
-		if (i == TIMEOUT) {
-			dev_info(dev->class_dev,
-				 "timeout during ADC conversion\n");
-			return -ETIMEDOUT;
+			return ret;
 		}
+
 		/* read data */
 		d = inw(dev->iobase + ADFIFO_R);
 		/* mangle the data as necessary */