[netdrvr e100] changelog/whitespace updates, small fixes:

* Updated change log
* Spelling corections
* Bug fix: remove confusing sign-on message that's printed when no link

Contributed by Scott Feldman @ Intel

drivers/net/e100/e100_main.c

@@ -45,6 +45,21 @@
 **********************************************************************/
 
 /* Change Log
+ *
+ * 2.1.29	12/20/02
+ *   o Bug fix: Device command timeout due to SMBus processing during init
+ *   o Bug fix: Not setting/clearing I (Interrupt) bit in tcb correctly
+ *   o Bug fix: Not using EEPROM WoL setting as default in ethtool
+ *   o Bug fix: Not able to set autoneg on using ethtool when interface down
+ *   o Bug fix: Not able to change speed/duplex using ethtool/mii
+ *     when interface up
+ *   o Bug fix: Ethtool shows autoneg on when forced to 100/Full
+ *   o Bug fix: Compiler error when CONFIG_PROC_FS not defined
+ *   o Bug fix: 2.5.44 e100 doesn't load with preemptive kernel enabled
+ *     (sleep while holding spinlock)
+ *   o Bug fix: 2.1.24-k1 doesn't display complete statistics
+ *   o Bug fix: System panic due to NULL watchdog timer dereference during
+ *     ifconfig down, rmmod and insmod
  *
  * 2.1.24       10/7/02
  *   o Bug fix: Wrong files under /proc/net/PRO_LAN_Adapters/ when interface
@@ -56,21 +71,6 @@
  *   o Removed misleading printks
  *
  * 2.1.12       8/2/02
- *   o Feature: ethtool register dump
- *   o Bug fix: Driver passes wrong name to /proc/interrupts
- *   o Bug fix: Ethernet bridging not working 
- *   o Bug fix: Promiscuous mode is not working
- *   o Bug fix: Checked return value from copy_from_user (William Stinson,
- *     wstinson@infonie.fr)
- *   o Bug fix: ARP wake on LAN fails
- *   o Bug fix: mii-diag does not update driver level's speed, duplex and
- *     re-configure flow control
- *   o Bug fix: Ethtool shows wrong speed/duplex when not connected
- *   o Bug fix: Ethtool shows wrong speed/duplex when reconnected if forced 
- *     speed/duplex
- *   o Bug fix: PHY loopback diagnostic fails
- *
- * 2.1.6        7/5/02
  */
  
 #include <linux/config.h>
@@ -135,7 +135,7 @@ static void e100_non_tx_background(unsigned long);
 
 /* Global Data structures and variables */
 char e100_copyright[] __devinitdata = "Copyright (c) 2002 Intel Corporation";
-char e100_driver_version[]="2.1.24-k2";
+char e100_driver_version[]="2.1.29-k1";
 const char *e100_full_driver_name = "Intel(R) PRO/100 Network Driver";
 char e100_short_driver_name[] = "e100";
 static int e100nics = 0;
@@ -652,7 +652,7 @@ e100_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
 	cal_checksum = e100_eeprom_calculate_chksum(bdp);
 	read_checksum = e100_eeprom_read(bdp, (bdp->eeprom_size - 1));
 	if (cal_checksum != read_checksum) {
-                printk(KERN_ERR "e100: Corrupted EERPROM on instance #%d\n",
+                printk(KERN_ERR "e100: Corrupted EEPROM on instance #%d\n",
 		       e100nics);
                 rc = -ENODEV;
                 goto err_pci;
@@ -2948,19 +2948,6 @@ e100_D101M_checksum(struct e100_private *bdp, struct sk_buff *skb)
 void __devinit
 e100_print_brd_conf(struct e100_private *bdp)
 {
-	if (netif_carrier_ok(bdp->device)) {
-		printk(KERN_NOTICE
-		       "  Mem:0x%08lx  IRQ:%d  Speed:%d Mbps  Dx:%s\n",
-		       (unsigned long) bdp->device->mem_start,
-		       bdp->device->irq, bdp->cur_line_speed,
-		       (bdp->cur_dplx_mode == FULL_DUPLEX) ? "Full" : "Half");
-	} else {
-		printk(KERN_NOTICE
-		       "  Mem:0x%08lx  IRQ:%d  Speed:%d Mbps  Dx:%s\n",
-		       (unsigned long) bdp->device->mem_start,
-		       bdp->device->irq, 0, "N/A");
-	}
-
 	/* Print the string if checksum Offloading was enabled */
 	if (bdp->flags & DF_CSUM_OFFLOAD)
 		printk(KERN_NOTICE "  Hardware receive checksums enabled\n");

drivers/net/e100/e100_test.c

@@ -29,7 +29,7 @@
 #include "e100_config.h"
 
 extern u16 e100_eeprom_read(struct e100_private *, u16);
-extern int e100_wait_exec_cmplx(struct e100_private *, u32,u8);
+extern int e100_wait_exec_cmplx(struct e100_private *, u32,u8, u8);
 extern void e100_phy_reset(struct e100_private *bdp);
 extern void e100_phy_autoneg(struct e100_private *bdp);
 extern void e100_phy_set_loopback(struct e100_private *bdp);
@@ -95,11 +95,9 @@ e100_run_diag(struct net_device *dev, u64 *test_info, u32 flags)
 		test_info [E100_EEPROM_TEST_FAIL] = true;
 	}
 
-	e100_deisolate_driver(bdp, false);
-
-	/*Let card recover from the test*/
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	schedule_timeout(HZ * 2);
+    	e100_deisolate_driver(bdp, false);
 
 	return flags | (test_result ? 0 : ETH_TEST_FL_FAILED);
 }
@@ -128,7 +126,7 @@ e100_diag_selftest(struct net_device *dev)
 		}
 	}
 
-	e100_hw_reset_recover(bdp,PORT_SOFTWARE_RESET);
+	e100_configure_device(bdp);
 
 	return retval;
 }
@@ -166,13 +164,19 @@ e100_diag_loopback (struct net_device *dev)
 {
 	u8 rc = 0;
 
+	printk(KERN_DEBUG "%s: PHY loopback test starts\n", dev->name);
+	e100_sw_reset(dev->priv, PORT_SELECTIVE_RESET);
 	if (!e100_diag_one_loopback(dev, PHY_LOOPBACK)) {
 		rc |= PHY_LOOPBACK;
 	}
+	printk(KERN_DEBUG "%s: PHY loopback test ends\n", dev->name);
 
+	printk(KERN_DEBUG "%s: MAC loopback test starts\n", dev->name);
+	e100_sw_reset(dev->priv, PORT_SELECTIVE_RESET);
 	if (!e100_diag_one_loopback(dev, MAC_LOOPBACK)) {
 		rc |= MAC_LOOPBACK;
 	}
+	printk(KERN_DEBUG "%s: MAC loopback test ends\n", dev->name);
 
 	return rc;
 }
@@ -341,12 +345,12 @@ static void
 e100_diag_loopback_cu_ru_exec(struct e100_private *bdp)
 {
 	/*load CU & RU base */ 
-	if (!e100_wait_exec_cmplx(bdp, 0, SCB_CUC_LOAD_BASE))
-		printk("e100: SCB_CUC_LOAD_BASE failed\n");
-	if(!e100_wait_exec_cmplx(bdp, 0, SCB_RUC_LOAD_BASE))
-		printk("e100: SCB_RUC_LOAD_BASE failed!\n");
-	if(!e100_wait_exec_cmplx(bdp, bdp->loopback.dma_handle, SCB_RUC_START))
-		printk("e100: SCB_RUC_START failed!\n");
+	if (!e100_wait_exec_cmplx(bdp, 0, SCB_CUC_LOAD_BASE, 0))
+		printk(KERN_ERR "e100: SCB_CUC_LOAD_BASE failed\n");
+	if(!e100_wait_exec_cmplx(bdp, 0, SCB_RUC_LOAD_BASE, 0))
+		printk(KERN_ERR "e100: SCB_RUC_LOAD_BASE failed!\n");
+	if(!e100_wait_exec_cmplx(bdp, bdp->loopback.dma_handle, SCB_RUC_START, 0))
+		printk(KERN_ERR "e100: SCB_RUC_START failed!\n");
 
 	bdp->next_cu_cmd = START_WAIT;
 	e100_start_cu(bdp, bdp->loopback.tcb);