Commit abf52f86 authored by John W. Linville's avatar John W. Linville

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

Conflicts:
	net/mac80211/mlme.c
parents 6a0076e0 021570e5
......@@ -2966,20 +2966,14 @@ F: drivers/net/ixgb/
F: drivers/net/ixgbe/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
M: Reinette Chatre <reinette.chatre@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
W: http://ipw2100.sourceforge.net
S: Odd Fixes
S: Orphan
F: Documentation/networking/README.ipw2100
F: drivers/net/wireless/ipw2x00/ipw2100.*
INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
M: Reinette Chatre <reinette.chatre@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
W: http://ipw2200.sourceforge.net
S: Odd Fixes
S: Orphan
F: Documentation/networking/README.ipw2200
F: drivers/net/wireless/ipw2x00/ipw2200.*
......
......@@ -594,6 +594,7 @@ static int prism2_config(struct pcmcia_device *link)
local_info_t *local;
int ret = 1;
struct hostap_cs_priv *hw_priv;
unsigned long flags;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
......@@ -625,9 +626,15 @@ static int prism2_config(struct pcmcia_device *link)
local->hw_priv = hw_priv;
hw_priv->link = link;
/*
* Make sure the IRQ handler cannot proceed until at least
* dev->base_addr is initialized.
*/
spin_lock_irqsave(&local->irq_init_lock, flags);
ret = pcmcia_request_irq(link, prism2_interrupt);
if (ret)
goto failed;
goto failed_unlock;
/*
* This actually configures the PCMCIA socket -- setting up
......@@ -636,11 +643,13 @@ static int prism2_config(struct pcmcia_device *link)
*/
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
goto failed_unlock;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
spin_unlock_irqrestore(&local->irq_init_lock, flags);
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: ",
dev_info, link->conf.ConfigIndex);
......@@ -667,6 +676,8 @@ static int prism2_config(struct pcmcia_device *link)
return ret;
failed_unlock:
spin_unlock_irqrestore(&local->irq_init_lock, flags);
failed:
kfree(hw_priv);
prism2_release((u_long)link);
......
......@@ -2621,6 +2621,18 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id)
iface = netdev_priv(dev);
local = iface->local;
/* Detect early interrupt before driver is fully configued */
spin_lock(&local->irq_init_lock);
if (!dev->base_addr) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",
dev->name);
}
spin_unlock(&local->irq_init_lock);
return IRQ_HANDLED;
}
spin_unlock(&local->irq_init_lock);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
if (local->func->card_present && !local->func->card_present(local)) {
......@@ -3138,6 +3150,7 @@ prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx,
spin_lock_init(&local->cmdlock);
spin_lock_init(&local->baplock);
spin_lock_init(&local->lock);
spin_lock_init(&local->irq_init_lock);
mutex_init(&local->rid_bap_mtx);
if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES)
......
......@@ -654,7 +654,7 @@ struct local_info {
rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock
* when removing entries from the list.
* TX and RX paths can use read lock. */
spinlock_t cmdlock, baplock, lock;
spinlock_t cmdlock, baplock, lock, irq_init_lock;
struct mutex rid_bap_mtx;
u16 infofid; /* MAC buffer id for info frame */
/* txfid, intransmitfid, next_txtid, and next_alloc are protected by
......
......@@ -1147,6 +1147,7 @@ static void iwlagn_tx_status(struct iwl_priv *priv, struct sk_buff *skb)
struct ieee80211_sta *sta;
struct iwl_station_priv *sta_priv;
rcu_read_lock();
sta = ieee80211_find_sta(priv->vif, hdr->addr1);
if (sta) {
sta_priv = (void *)sta->drv_priv;
......@@ -1155,6 +1156,7 @@ static void iwlagn_tx_status(struct iwl_priv *priv, struct sk_buff *skb)
atomic_dec_return(&sta_priv->pending_frames) == 0)
ieee80211_sta_block_awake(priv->hw, sta, false);
}
rcu_read_unlock();
ieee80211_tx_status_irqsafe(priv->hw, skb);
}
......@@ -1322,6 +1324,11 @@ void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
sta_id = ba_resp->sta_id;
tid = ba_resp->tid;
agg = &priv->stations[sta_id].tid[tid].agg;
if (unlikely(agg->txq_id != scd_flow)) {
IWL_ERR(priv, "BA scd_flow %d does not match txq_id %d\n",
scd_flow, agg->txq_id);
return;
}
/* Find index just before block-ack window */
index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
......
......@@ -3465,10 +3465,12 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
int ret;
u8 sta_id;
sta_priv->common.sta_id = IWL_INVALID_STATION;
IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
sta->addr);
mutex_lock(&priv->mutex);
IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
sta->addr);
sta_priv->common.sta_id = IWL_INVALID_STATION;
atomic_set(&sta_priv->pending_frames, 0);
if (vif->type == NL80211_IFTYPE_AP)
......@@ -3480,6 +3482,7 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
IWL_ERR(priv, "Unable to add station %pM (%d)\n",
sta->addr, ret);
/* Should we return success if return code is EEXIST ? */
mutex_unlock(&priv->mutex);
return ret;
}
......@@ -3489,6 +3492,7 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
sta->addr);
iwl_rs_rate_init(priv, sta, sta_id);
mutex_unlock(&priv->mutex);
return 0;
}
......
......@@ -500,6 +500,7 @@ void iwl_bg_abort_scan(struct work_struct *work)
mutex_lock(&priv->mutex);
cancel_delayed_work_sync(&priv->scan_check);
set_bit(STATUS_SCAN_ABORTING, &priv->status);
iwl_send_scan_abort(priv);
......
......@@ -1373,10 +1373,14 @@ int iwl_mac_sta_remove(struct ieee80211_hw *hw,
IWL_DEBUG_INFO(priv, "received request to remove station %pM\n",
sta->addr);
mutex_lock(&priv->mutex);
IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n",
sta->addr);
ret = iwl_remove_station(priv, sta_common->sta_id, sta->addr);
if (ret)
IWL_ERR(priv, "Error removing station %pM\n",
sta->addr);
mutex_unlock(&priv->mutex);
return ret;
}
EXPORT_SYMBOL(iwl_mac_sta_remove);
......@@ -3363,10 +3363,13 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
bool is_ap = vif->type == NL80211_IFTYPE_STATION;
u8 sta_id;
sta_priv->common.sta_id = IWL_INVALID_STATION;
IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
sta->addr);
mutex_lock(&priv->mutex);
IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
sta->addr);
sta_priv->common.sta_id = IWL_INVALID_STATION;
ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
&sta_id);
......@@ -3374,6 +3377,7 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
IWL_ERR(priv, "Unable to add station %pM (%d)\n",
sta->addr, ret);
/* Should we return success if return code is EEXIST ? */
mutex_unlock(&priv->mutex);
return ret;
}
......@@ -3383,6 +3387,7 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
sta->addr);
iwl3945_rs_rate_init(priv, sta, sta_id);
mutex_unlock(&priv->mutex);
return 0;
}
......
......@@ -549,7 +549,7 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb)
prxpd = (struct rxpd *) skb->data;
stats.flag = 0;
memset(&stats, 0, sizeof(stats));
if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
stats.flag |= RX_FLAG_FAILED_FCS_CRC;
stats.freq = priv->cur_freq;
......
......@@ -41,6 +41,8 @@ static DEFINE_PCI_DEVICE_TABLE(p54p_table) = {
{ PCI_DEVICE(0x1260, 0x3877) },
/* Intersil PRISM Javelin/Xbow Wireless LAN adapter */
{ PCI_DEVICE(0x1260, 0x3886) },
/* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */
{ PCI_DEVICE(0x1260, 0xffff) },
{ },
};
......
......@@ -1704,8 +1704,45 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
mutex_unlock(&ifmgd->mtx);
if (skb->len >= 24 + 2 /* mgmt + deauth reason */ &&
(fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH)
(fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH) {
struct ieee80211_local *local = sdata->local;
struct ieee80211_work *wk;
mutex_lock(&local->work_mtx);
list_for_each_entry(wk, &local->work_list, list) {
if (wk->sdata != sdata)
continue;
if (wk->type != IEEE80211_WORK_ASSOC)
continue;
if (memcmp(mgmt->bssid, wk->filter_ta, ETH_ALEN))
continue;
if (memcmp(mgmt->sa, wk->filter_ta, ETH_ALEN))
continue;
/*
* Printing the message only here means we can't
* spuriously print it, but it also means that it
* won't be printed when the frame comes in before
* we even tried to associate or in similar cases.
*
* Ultimately, I suspect cfg80211 should print the
* messages instead.
*/
printk(KERN_DEBUG
"%s: deauthenticated from %pM (Reason: %u)\n",
sdata->name, mgmt->bssid,
le16_to_cpu(mgmt->u.deauth.reason_code));
list_del_rcu(&wk->list);
free_work(wk);
break;
}
mutex_unlock(&local->work_mtx);
cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
}
}
static void ieee80211_sta_timer(unsigned long data)
......
......@@ -715,7 +715,7 @@ static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
struct ieee80211_rx_status *rx_status;
struct ieee80211_mgmt *mgmt;
struct ieee80211_work *wk;
enum work_action rma;
enum work_action rma = WORK_ACT_NONE;
u16 fc;
rx_status = (struct ieee80211_rx_status *) skb->cb;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment