Skip to content

L
linux
Commit ac9053d2 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 4.17-rc1.

  Lots of USB typeC work happened this round, with code moving from the
  staging directory into the "real" part of the kernel, as well as new
  infrastructure being added to be able to handle the different types of
  "roles" that typeC requires.

  There is also the normal huge set of USB gadget controller and driver
  updates, along with XHCI changes, and a raft of other tiny fixes all
  over the USB tree. And the PHY driver updates are merged in here as
  well as they interacted with the USB drivers in some places.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
  Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
  usb: musb: gadget: misplaced out of bounds check
  usb: chipidea: imx: Fix ULPI on imx53
  usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
  usb: chipidea: usbmisc: small clean up
  usb: chipidea: usbmisc: evdo can be set e/o reset
  usb: chipidea: usbmisc: evdo is only specific to OTG port
  USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
  usb: dwc3: gadget: never call ->complete() from ->ep_queue()
  usb: gadget: udc: core: update usb_ep_queue() documentation
  usb: host: Remove the deprecated ATH79 USB host config options
  usb: roles: Fix return value check in intel_xhci_usb_probe()
  USB: gadget: f_midi: fixing a possible double-free in f_midi
  usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
  usb: core: Copy parameter string correctly and remove superfluous null check
  USB: announce bcdDevice as well as idVendor, idProduct.
  USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
  usb: hub: Reduce warning to notice on power loss
  USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
  USB: serial: cp210x: add ELDAT Easywave RX09 id
  ...
parents f9ca6a56 5267c5e0
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 9264 additions and 3082 deletions
Documentation/ABI/testing/sysfs-bus-usb
View file @ ac9053d2
......@@ -189,6 +189,16 @@ Description:
The file will read "hotplug", "wired" and "not used" if the
information is available, and "unknown" otherwise.
What: /sys/bus/usb/devices/.../(hub interface)/portX/over_current_count
Date: February 2018
Contact: Richard Leitner <richard.leitner@skidata.com>
Description:
Most hubs are able to detect over-current situations on their
ports and report them to the kernel. This attribute is to expose
the number of over-current situation occurred on a specific port
to user space. This file will contain an unsigned 32 bit value
which wraps to 0 after its maximum is reached.
What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
Date: November 2015
Contact: Lu Baolu <baolu.lu@linux.intel.com>
......
Documentation/ABI/testing/sysfs-class-usb_role 0 → 100644
View file @ ac9053d2
What: /sys/class/usb_role/
Date: Jan 2018
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Place in sysfs for USB Role Switches. USB Role Switch is a
device that can select the data role (host or device) for USB
port.
What: /sys/class/usb_role/<switch>/role
Date: Jan 2018
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
The current role of the switch. This attribute can be used for
requesting role swapping with non-USB Type-C ports. With USB
Type-C ports, the ABI defined for USB Type-C connector class
must be used.
Valid values:
- none
- host
- device
Documentation/admin-guide/kernel-parameters.txt
View file @ ac9053d2
......@@ -4392,6 +4392,64 @@
usbcore.nousb [USB] Disable the USB subsystem
usbcore.quirks=
[USB] A list of quirk entries to augment the built-in
usb core quirk list. List entries are separated by
commas. Each entry has the form
VendorID:ProductID:Flags. The IDs are 4-digit hex
numbers and Flags is a set of letters. Each letter
will change the built-in quirk; setting it if it is
clear and clearing it if it is set. The letters have
the following meanings:
a = USB_QUIRK_STRING_FETCH_255 (string
descriptors must not be fetched using
a 255-byte read);
b = USB_QUIRK_RESET_RESUME (device can't resume
correctly so reset it instead);
c = USB_QUIRK_NO_SET_INTF (device can't handle
Set-Interface requests);
d = USB_QUIRK_CONFIG_INTF_STRINGS (device can't
handle its Configuration or Interface
strings);
e = USB_QUIRK_RESET (device can't be reset
(e.g morph devices), don't use reset);
f = USB_QUIRK_HONOR_BNUMINTERFACES (device has
more interface descriptions than the
bNumInterfaces count, and can't handle
talking to these interfaces);
g = USB_QUIRK_DELAY_INIT (device needs a pause
during initialization, after we read
the device descriptor);
h = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL (For
high speed and super speed interrupt
endpoints, the USB 2.0 and USB 3.0 spec
require the interval in microframes (1
microframe = 125 microseconds) to be
calculated as interval = 2 ^
(bInterval-1).
Devices with this quirk report their
bInterval as the result of this
calculation instead of the exponent
variable used in the calculation);
i = USB_QUIRK_DEVICE_QUALIFIER (device can't
handle device_qualifier descriptor
requests);
j = USB_QUIRK_IGNORE_REMOTE_WAKEUP (device
generates spurious wakeup, ignore
remote wakeup capability);
k = USB_QUIRK_NO_LPM (device can't handle Link
Power Management);
l = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL
(Device reports its bInterval as linear
frames instead of the USB 2.0
calculation);
m = USB_QUIRK_DISCONNECT_SUSPEND (Device needs
to be disconnected before suspend to
prevent spurious wakeup);
n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
pause after every control message);
Example: quirks=0781:5580:bk,0a5c:5834:gij
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
......
Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
View file @ ac9053d2
......@@ -74,6 +74,29 @@ Example:
reboot-offset = <0x4>;
};
-----------------------------------------------------------------------
Hisilicon Hi3798CV200 Peripheral Controller
The Hi3798CV200 Peripheral Controller controls peripherals, queries
their status, and configures some functions of peripherals.
Required properties:
- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"
and "simple-mfd".
- reg: Register address and size of Peripheral Controller.
- #address-cells: Should be 1.
- #size-cells: Should be 1.
Examples:
perictrl: peripheral-controller@8a20000 {
compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
"simple-mfd";
reg = <0x8a20000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
};
-----------------------------------------------------------------------
Hisilicon Hi6220 system controller
......
Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt
View file @ ac9053d2
......@@ -6,6 +6,10 @@ Required properties:
- #phys-cells: must be 0 (see phy-bindings.txt in this directory)
Optional properties:
- clocks: a phandle to the clock of this PHY
- clock-names: must be "phy"
- resets: a phandle to the reset line of this PHY
- reset-names: must be "phy"
- phy-supply: see phy-bindings.txt in this directory
......
Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt 0 → 100644
View file @ ac9053d2
* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding
Required properties:
- compatible: Should be "amlogic,meson-gxl-usb3-phy"
- #phys-cells: must be 0 (see phy-bindings.txt in this directory)
- reg: The base address and length of the registers
- interrupts: the interrupt specifier for the OTG detection
- clocks: phandles to the clocks for
- the USB3 PHY
- and peripheral mode/OTG detection
- clock-names: must contain "phy" and "peripheral"
- resets: phandle to the reset lines for:
- the USB3 PHY and
- peripheral mode/OTG detection
- reset-names: must contain "phy" and "peripheral"
Optional properties:
- phy-supply: see phy-bindings.txt in this directory
Example:
usb3_phy0: phy@78080 {
compatible = "amlogic,meson-gxl-usb3-phy";
#phy-cells = <0>;
reg = <0x0 0x78080 0x0 0x20>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>;
clock-names = "phy", "peripheral";
resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>;
reset-names = "phy", "peripheral";
};
Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt 0 → 100644
View file @ ac9053d2
HiSilicon STB PCIE/SATA/USB3 PHY
Required properties:
- compatible: Should be "hisilicon,hi3798cv200-combphy"
- reg: Should be the address space for COMBPHY configuration and state
registers in peripheral controller, e.g. PERI_COMBPHY0_CFG and
PERI_COMBPHY0_STATE for COMBPHY0 Hi3798CV200 SoC.
- #phy-cells: Should be 1. The cell number is used to select the phy mode
as defined in <dt-bindings/phy/phy.h>.
- clocks: The phandle to clock provider and clock specifier pair.
- resets: The phandle to reset controller and reset specifier pair.
Refer to phy/phy-bindings.txt for the generic PHY binding properties.
Optional properties:
- hisilicon,fixed-mode: If the phy device doesn't support mode select
but a fixed mode setting, the property should be present to specify
the particular mode.
- hisilicon,mode-select-bits: If the phy device support mode select,
this property should be present to specify the register bits in
peripheral controller, as a 3 integers tuple:
<register_offset bit_shift bit_mask>.
Notes:
- Between hisilicon,fixed-mode and hisilicon,mode-select-bits, one and only
one of them should be present.
- The device node should be a child of peripheral controller that contains
COMBPHY configuration/state and PERI_CTRL register used to select PHY mode.
Refer to arm/hisilicon/hisilicon.txt for the parent peripheral controller
bindings.
Examples:
perictrl: peripheral-controller@8a20000 {
compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
"simple-mfd";
reg = <0x8a20000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x8a20000 0x1000>;
combphy0: phy@850 {
compatible = "hisilicon,hi3798cv200-combphy";
reg = <0x850 0x8>;
#phy-cells = <1>;
clocks = <&crg HISTB_COMBPHY0_CLK>;
resets = <&crg 0x188 4>;
hisilicon,fixed-mode = <PHY_TYPE_USB3>;
};
combphy1: phy@858 {
compatible = "hisilicon,hi3798cv200-combphy";
reg = <0x858 0x8>;
#phy-cells = <1>;
clocks = <&crg HISTB_COMBPHY1_CLK>;
resets = <&crg 0x188 12>;
hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
};
};
Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt 0 → 100644
View file @ ac9053d2
Device tree bindings for HiSilicon INNO USB2 PHY
Required properties:
- compatible: Should be one of the following strings:
"hisilicon,inno-usb2-phy",
"hisilicon,hi3798cv200-usb2-phy".
- reg: Should be the address space for PHY configuration register in peripheral
controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.
- clocks: The phandle and clock specifier pair for INNO USB2 PHY device
reference clock.
- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset
signal.
- #address-cells: Must be 1.
- #size-cells: Must be 0.
The INNO USB2 PHY device should be a child node of peripheral controller that
contains the PHY configuration register, and each device suppports up to 2 PHY
ports which are represented as child nodes of INNO USB2 PHY device.
Required properties for PHY port node:
- reg: The PHY port instance number.
- #phy-cells: Defined by generic PHY bindings. Must be 0.
- resets: The phandle and reset specifier pair for PHY port reset signal.
Refer to phy/phy-bindings.txt for the generic PHY binding properties
Example:
perictrl: peripheral-controller@8a20000 {
compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd";
reg = <0x8a20000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x8a20000 0x1000>;
usb2_phy1: usb2-phy@120 {
compatible = "hisilicon,hi3798cv200-usb2-phy";
reg = <0x120 0x4>;
clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
resets = <&crg 0xbc 4>;
#address-cells = <1>;
#size-cells = <0>;
usb2_phy1_port0: phy@0 {
reg = <0>;
#phy-cells = <0>;
resets = <&crg 0xbc 8>;
};
usb2_phy1_port1: phy@1 {
reg = <1>;
#phy-cells = <0>;
resets = <&crg 0xbc 9>;
};
};
usb2_phy2: usb2-phy@124 {
compatible = "hisilicon,hi3798cv200-usb2-phy";
reg = <0x124 0x4>;
clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
resets = <&crg 0xbc 6>;
#address-cells = <1>;
#size-cells = <0>;
usb2_phy2_port0: phy@0 {
reg = <0>;
#phy-cells = <0>;
resets = <&crg 0xbc 10>;
};
};
};
Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt 0 → 100644
View file @ ac9053d2
Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY
Required properties:
- compatible Must be "motorola,mapphone-mdm6600"
- enable-gpios GPIO to enable the USB PHY
- power-gpios GPIO to power on the device
- reset-gpios GPIO to reset the device
- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for
normal mode versus USB flashing mode
- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600
- motorola,status-gpios Three GPIOs to read the power state of the MDM6600
Example:
usb-phy {
compatible = "motorola,mapphone-mdm6600";
enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
<&gpio5 21 GPIO_ACTIVE_HIGH>;
motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
<&gpio4 8 GPIO_ACTIVE_HIGH>,
<&gpio5 14 GPIO_ACTIVE_HIGH>;
motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
<&gpio2 21 GPIO_ACTIVE_HIGH>,
<&gpio2 23 GPIO_ACTIVE_HIGH>;
#phy-cells = <0>;
};
Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
View file @ ac9053d2
......@@ -27,6 +27,10 @@ Optional properties (controller (parent) node):
- reg : offset and length of register shared by multiple ports,
exclude port's private register. It is needed on mt2701
and mt8173, but not on mt2712.
- mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate
calibrate
- mediatek,src-coef : coefficient for slew rate calibrate, depends on
SoC process
Required properties (port (child) node):
- reg : address and length of the register set for the port.
......
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
View file @ ac9053d2
......@@ -14,25 +14,9 @@ Required properties:
- resets : a list of phandle + reset specifier pairs
- reset-names : string reset name, must be:
"uphy", "uphy-pipe", "uphy-tcphy"
- extcon : extcon specifier for the Power Delivery
Note, there are 2 type-c phys for RK3399, and they are almost identical, except
these registers(description below), every register node contains 3 sections:
offset, enable bit, write mask bit.
- rockchip,typec-conn-dir : the register of type-c connector direction,
for type-c phy0, it must be <0xe580 0 16>;
for type-c phy1, it must be <0xe58c 0 16>;
- rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
control.
for type-c phy0, it must be <0xe580 3 19>;
for type-c phy1, it must be <0xe58c 3 19>;
- rockchip,external-psm : the register of type-c phy external psm clock
selection.
for type-c phy0, it must be <0xe588 14 30>;
for type-c phy1, it must be <0xe594 14 30>;
- rockchip,pipe-status : the register of type-c phy pipe status.
for type-c phy0, it must be <0xe5c0 0 0>;
for type-c phy1, it must be <0xe5c0 16 16>;
Optional properties:
- extcon : extcon specifier for the Power Delivery
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify dp or usb3 port,
......@@ -43,6 +27,13 @@ Required nodes : a sub-node is required for each port the phy provides.
Required properties (port (child) node):
- #phy-cells : must be 0, See ./phy-bindings.txt for details.
Deprecated properties, do not use in new device tree sources, these
properties are determined by the compatible value:
- rockchip,typec-conn-dir
- rockchip,usb3tousb2-en
- rockchip,external-psm
- rockchip,pipe-status
Example:
tcphy0: phy@ff7c0000 {
compatible = "rockchip,rk3399-typec-phy";
......@@ -58,10 +49,6 @@ Example:
<&cru SRST_UPHY0_PIPE_L00>,
<&cru SRST_P_UPHY0_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
rockchip,typec-conn-dir = <0xe580 0 16>;
rockchip,usb3tousb2-en = <0xe580 3 19>;
rockchip,external-psm = <0xe588 14 30>;
rockchip,pipe-status = <0xe5c0 0 0>;
tcphy0_dp: dp-port {
#phy-cells = <0>;
......@@ -86,10 +73,6 @@ Example:
<&cru SRST_UPHY1_PIPE_L00>,
<&cru SRST_P_UPHY1_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
rockchip,typec-conn-dir = <0xe58c 0 16>;
rockchip,usb3tousb2-en = <0xe58c 3 19>;
rockchip,external-psm = <0xe594 14 30>;
rockchip,pipe-status = <0xe5c0 16 16>;
tcphy1_dp: dp-port {
#phy-cells = <0>;
......
Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt 0 → 100644
View file @ ac9053d2
STMicroelectronics STM32 USB HS PHY controller
The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
switch. It controls PHY configuration and status, and the UTMI+ switch that
selects either OTG or HOST controller for the second PHY port. It also sets
PLL configuration.
USBPHYC
|_ PLL
|
|_ PHY port#1 _________________ HOST controller
| _ |
| / 1|________________|
|_ PHY port#2 ----| |________________
| \_0| |
|_ UTMI switch_______| OTG controller
Phy provider node
=================
Required properties:
- compatible: must be "st,stm32mp1-usbphyc"
- reg: address and length of the usb phy control register set
- clocks: phandle + clock specifier for the PLL phy clock
- #address-cells: number of address cells for phys sub-nodes, must be <1>
- #size-cells: number of size cells for phys sub-nodes, must be <0>
Optional properties:
- assigned-clocks: phandle + clock specifier for the PLL phy clock
- assigned-clock-parents: the PLL phy clock parent
- resets: phandle + reset specifier
Required nodes: one sub-node per port the controller provides.
Phy sub-nodes
==============
Required properties:
- reg: phy port index
- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
see phy-bindings.txt in the same directory.
- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
port#1 and must be <1> for PHY port#2, to select USB controller
Example:
usbphyc: usb-phy@5a006000 {
compatible = "st,stm32mp1-usbphyc";
reg = <0x5a006000 0x1000>;
clocks = <&rcc_clk USBPHY_K>;
resets = <&rcc_rst USBPHY_R>;
#address-cells = <1>;
#size-cells = <0>;
usbphyc_port0: usb-phy@0 {
reg = <0>;
phy-supply = <&vdd_usb>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>
#phy-cells = <0>;
};
usbphyc_port1: usb-phy@1 {
reg = <1>;
phy-supply = <&vdd_usb>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>
#phy-cells = <1>;
};
};
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
View file @ ac9053d2
......@@ -8,7 +8,8 @@ Required properties:
- compatible: compatible list, contains:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
"qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
- reg: offset and length of register set for PHY's common serdes block.
......@@ -25,10 +26,13 @@ Required properties:
- clock-names: "cfg_ahb" for phy config clock,
"aux" for phy aux clock,
"ref" for 19.2 MHz ref clk,
"com_aux" for phy common block aux clock,
For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,qmp-v3-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
......
Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
View file @ ac9053d2
......@@ -4,7 +4,10 @@ Qualcomm QUSB2 phy controller
QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
Required properties:
- compatible: compatible list, contains "qcom,msm8996-qusb2-phy".
- compatible: compatible list, contains
"qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
"qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
- reg: offset and length of the PHY register set.
- #phy-cells: must be 0.
......
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
View file @ ac9053d2
......@@ -8,6 +8,8 @@ Required properties:
SoC.
"renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
SoC.
"renesas,usb2-phy-r8a77965" if the device is a part of an
R8A77965 SoC.
"renesas,usb2-phy-r8a77995" if the device is a part of an
R8A77995 SoC.
"renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
......
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
View file @ ac9053d2
......@@ -11,6 +11,8 @@ Required properties:
SoC.
"renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
SoC.
"renesas,r8a77965-usb3-phy" if the device is a part of an
R8A77965 SoC.
"renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 compatible
device.
......
Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
View file @ ac9053d2
......@@ -11,6 +11,7 @@ Required properties:
* allwinner,sun8i-a33-usb-phy
* allwinner,sun8i-a83t-usb-phy
* allwinner,sun8i-h3-usb-phy
* allwinner,sun8i-r40-usb-phy
* allwinner,sun8i-v3s-usb-phy
* allwinner,sun50i-a64-usb-phy
- reg : a list of offset + length pairs
......
Documentation/devicetree/bindings/usb/amlogic,dwc3.txt 0 → 100644
View file @ ac9053d2
Amlogic Meson GX DWC3 USB SoC controller
Required properties:
- compatible: depending on the SoC this should contain one of:
* amlogic,meson-axg-dwc3
* amlogic,meson-gxl-dwc3
- clocks: a handle for the "USB general" clock
- clock-names: must be "usb_general"
- resets: a handle for the shared "USB OTG" reset line
- reset-names: must be "usb_otg"
Required child node:
A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
PHY documentation is provided in the following places:
- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt
- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt
Example device nodes:
usb0: usb@ff500000 {
compatible = "amlogic,meson-axg-dwc3";
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&clkc CLKID_USB>;
clock-names = "usb_general";
resets = <&reset RESET_USB_OTG>;
reset-names = "usb_otg";
dwc3: dwc3@ff500000 {
compatible = "snps,dwc3";
reg = <0x0 0xff500000 0x0 0x100000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
maximum-speed = "high-speed";
snps,dis_u2_susphy_quirk;
phys = <&usb3_phy>, <&usb2_phy0>;
phy-names = "usb2-phy", "usb3-phy";
};
};
Documentation/devicetree/bindings/usb/dwc3.txt
View file @ ac9053d2
......@@ -57,6 +57,22 @@ Optional properties:
- snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
register for post-silicon frame length adjustment when the
fladj_30mhz_sdbnd signal is invalid or incorrect.
- snps,rx-thr-num-pkt-prd: periodic ESS RX packet threshold count - host mode
only. Set this and rx-max-burst-prd to a valid,
non-zero value 1-16 (DWC_usb31 programming guide
section 1.2.4) to enable periodic ESS RX threshold.
- snps,rx-max-burst-prd: max periodic ESS RX burst size - host mode only. Set
this and rx-thr-num-pkt-prd to a valid, non-zero value
1-16 (DWC_usb31 programming guide section 1.2.4) to
enable periodic ESS RX threshold.
- snps,tx-thr-num-pkt-prd: periodic ESS TX packet threshold count - host mode
only. Set this and tx-max-burst-prd to a valid,
non-zero value 1-16 (DWC_usb31 programming guide
section 1.2.3) to enable periodic ESS TX threshold.
- snps,tx-max-burst-prd: max periodic ESS TX burst size - host mode only. Set
this and tx-thr-num-pkt-prd to a valid, non-zero value
1-16 (DWC_usb31 programming guide section 1.2.3) to
enable periodic ESS TX threshold.
- <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
......
Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
View file @ ac9053d2
......@@ -32,7 +32,7 @@ Required properties:
"mcu_ck": mcu_bus clock for register access,
"dma_ck": dma_bus clock for data transfer by DMA
- phys : a list of phandle + phy specifier pairs
- phys : see usb-hcd.txt in the current directory
Optional properties:
- wakeup-source : enable USB remote wakeup;
......@@ -52,6 +52,9 @@ Optional properties:
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- imod-interval-ns: default interrupt moderation interval is 5000ns
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example:
usb30: usb@11270000 {
compatible = "mediatek,mt8173-xhci";
......
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
View file @ ac9053d2
......@@ -17,7 +17,7 @@ Required properties:
- clock-names : must contain "sys_ck" for clock of controller,
the following clocks are optional:
"ref_ck", "mcu_ck" and "dam_ck";
- phys : a list of phandle + phy specifier pairs
- phys : see usb-hcd.txt in the current directory
- dr_mode : should be one of "host", "peripheral" or "otg",
refer to usb/generic.txt
......@@ -53,6 +53,9 @@ Optional properties:
- mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
bit1 for u3port1, ... etc;
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Sub-nodes:
The xhci should be added as subnode to mtu3 as shown in the following example
if host mode is enabled. The DT binding details of xhci can be found in:
......
Documentation/devicetree/bindings/usb/usb-ehci.txt
View file @ ac9053d2
......@@ -16,10 +16,12 @@ Optional properties:
- has-transaction-translator : boolean, set this if EHCI have a Transaction
Translator built into the root hub.
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
- phys : see usb-hcd.txt in the current directory
- resets : phandle + reset specifier pair
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example (Sequoia 440EPx):
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
......
Documentation/devicetree/bindings/usb/usb-hcd.txt 0 → 100644
View file @ ac9053d2
Generic USB HCD (Host Controller Device) Properties
Optional properties:
- phys: a list of all USB PHYs on this HCD
Example:
&usb1 {
phys = <&usb2_phy1>, <&usb3_phy1>;
};
Documentation/devicetree/bindings/usb/usb-ohci.txt
View file @ ac9053d2
......@@ -13,10 +13,12 @@ Optional properties:
- remote-wakeup-connected: remote wakeup is wired on the platform
- num-ports : u32, to override the detected port count
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
- phys : see usb-hcd.txt in the current directory
- resets : a list of phandle + reset specifier pairs
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example:
ohci0: usb@1c14400 {
......
Documentation/devicetree/bindings/usb/usb-uhci.txt
View file @ ac9053d2
......@@ -6,6 +6,9 @@ Required properties:
- reg : Should contain 1 register ranges(address and length)
- interrupts : UHCI controller interrupt
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example:
uhci@d8007b00 {
......
Documentation/devicetree/bindings/usb/usb-xhci.txt
View file @ ac9053d2
......@@ -33,6 +33,11 @@ Optional properties:
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
- imod-interval-ns: default interrupt moderation interval is 5000ns
- phys : see usb-hcd.txt in the current directory
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example:
usb@f0931000 {
......
Documentation/driver-api/device_connection.rst 0 → 100644
View file @ ac9053d2
==================
Device connections
==================
Introduction
------------
Devices often have connections to other devices that are outside of the direct
child/parent relationship. A serial or network communication controller, which
could be a PCI device, may need to be able to get a reference to its PHY
component, which could be attached for example to the I2C bus. Some device
drivers need to be able to control the clocks or the GPIOs for their devices,
and so on.
Device connections are generic descriptions of any type of connection between
two separate devices.
Device connections alone do not create a dependency between the two devices.
They are only descriptions which are not tied to either of the devices directly.
A dependency between the two devices exists only if one of the two endpoint
devices requests a reference to the other. The descriptions themselves can be
defined in firmware (not yet supported) or they can be built-in.
Usage
-----
Device connections should exist before device ``->probe`` callback is called for
either endpoint device in the description. If the connections are defined in
firmware, this is not a problem. It should be considered if the connection
descriptions are "built-in", and need to be added separately.
The connection description consists of the names of the two devices with the
connection, i.e. the endpoints, and unique identifier for the connection which
is needed if there are multiple connections between the two devices.
After a description exists, the devices in it can request reference to the other
endpoint device, or they can request the description itself.
API
---
.. kernel-doc:: drivers/base/devcon.c
: functions: device_connection_find_match device_connection_find device_connection_add device_connection_remove
Documentation/driver-api/usb/typec.rst
View file @ ac9053d2
......@@ -61,7 +61,7 @@ Registering the ports
The port drivers will describe every Type-C port they control with struct
typec_capability data structure, and register them with the following API:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_register_port typec_unregister_port
When registering the ports, the prefer_role member in struct typec_capability
......@@ -80,7 +80,7 @@ typec_partner_desc. The class copies the details of the partner during
registration. The class offers the following API for registering/unregistering
partners.
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_register_partner typec_unregister_partner
The class will provide a handle to struct typec_partner if the registration was
......@@ -92,7 +92,7 @@ should include handle to struct usb_pd_identity instance. The class will then
create a sysfs directory for the identity under the partner device. The result
of Discover Identity command can then be reported with the following API:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_partner_set_identity
Registering Cables
......@@ -113,7 +113,7 @@ typec_cable_desc and about a plug in struct typec_plug_desc. The class copies
the details during registration. The class offers the following API for
registering/unregistering cables and their plugs:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_register_cable typec_unregister_cable typec_register_plug typec_unregister_plug
The class will provide a handle to struct typec_cable and struct typec_plug if
......@@ -125,7 +125,7 @@ include handle to struct usb_pd_identity instance. The class will then create a
sysfs directory for the identity under the cable device. The result of Discover
Identity command can then be reported with the following API:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_cable_set_identity
Notifications
......@@ -135,7 +135,7 @@ When the partner has executed a role change, or when the default roles change
during connection of a partner or cable, the port driver must use the following
APIs to report it to the class:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role typec_set_pwr_opmode
Alternate Modes
......@@ -150,7 +150,7 @@ and struct typec_altmode_desc which is a container for all the supported modes.
Ports that support Alternate Modes need to register each SVID they support with
the following API:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_port_register_altmode
If a partner or cable plug provides a list of SVIDs as response to USB Power
......@@ -159,12 +159,12 @@ registered.
API for the partners:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_partner_register_altmode
API for the Cable Plugs:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_plug_register_altmode
So ports, partners and cable plugs will register the alternate modes with their
......@@ -172,11 +172,62 @@ own functions, but the registration will always return a handle to struct
typec_altmode on success, or NULL. The unregistration will happen with the same
function:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_unregister_altmode
If a partner or cable plug enters or exits a mode, the port driver needs to
notify the class with the following API:
.. kernel-doc:: drivers/usb/typec/typec.c
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_altmode_update_active
Multiplexer/DeMultiplexer Switches
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
USB Type-C connectors may have one or more mux/demux switches behind them. Since
the plugs can be inserted right-side-up or upside-down, a switch is needed to
route the correct data pairs from the connector to the USB controllers. If
Alternate or Accessory Modes are supported, another switch is needed that can
route the pins on the connector to some other component besides USB. USB Type-C
Connector Class supplies an API for registering those switches.
.. kernel-doc:: drivers/usb/typec/mux.c
:functions: typec_switch_register typec_switch_unregister typec_mux_register typec_mux_unregister
In most cases the same physical mux will handle both the orientation and mode.
However, as the port drivers will be responsible for the orientation, and the
alternate mode drivers for the mode, the two are always separated into their
own logical components: "mux" for the mode and "switch" for the orientation.
When a port is registered, USB Type-C Connector Class requests both the mux and
the switch for the port. The drivers can then use the following API for
controlling them:
.. kernel-doc:: drivers/usb/typec/class.c
:functions: typec_set_orientation typec_set_mode
If the connector is dual-role capable, there may also be a switch for the data
role. USB Type-C Connector Class does not supply separate API for them. The
port drivers can use USB Role Class API with those.
Illustration of the muxes behind a connector that supports an alternate mode:
------------------------
| Connector |
------------------------
| |
------------------------
\ Orientation /
--------------------
|
--------------------
/ Mode \
------------------------
/ \
------------------------ --------------------
| Alt Mode | / USB Role \
------------------------ ------------------------
/ \
------------------------ ------------------------
| USB Host | | USB Device |
------------------------ ------------------------
MAINTAINERS
View file @ ac9053d2
......@@ -4079,7 +4079,7 @@ S: Supported
F: drivers/mtd/nand/denali*
DESIGNWARE USB2 DRD IP DRIVER
M: John Youn <johnyoun@synopsys.com>
M: Minas Harutyunyan <hminas@synopsys.com>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
......@@ -14476,6 +14476,12 @@ S: Maintained
F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
USB INTEL XHCI ROLE MUX DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/roles/intel-xhci-usb-role-switch.c
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
......@@ -14606,6 +14612,12 @@ F: drivers/usb/
F: include/linux/usb.h
F: include/linux/usb/
USB TYPEC PI3USB30532 MUX DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/typec/mux/pi3usb30532.c
USB TYPEC SUBSYSTEM
M: Heikki Krogerus <heikki.krogerus@linux.intel.com>
L: linux-usb@vger.kernel.org
......
arch/mips/Kconfig
View file @ ac9053d2
......@@ -200,6 +200,7 @@ config ATH79
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART_PROM
select USE_OF
select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
......
drivers/base/Makefile
View file @ ac9053d2
......@@ -5,7 +5,8 @@ obj-y := component.o core.o bus.o dd.o syscore.o \
driver.o class.o platform.o \
cpu.o firmware.o init.o map.o devres.o \
attribute_container.o transport_class.o \
topology.o container.o property.o cacheinfo.o
topology.o container.o property.o cacheinfo.o \
devcon.o
obj-$(CONFIG_DEVTMPFS) += devtmpfs.o
obj-$(CONFIG_DMA_CMA) += dma-contiguous.o
obj-y += power/
......
drivers/base/devcon.c 0 → 100644
View file @ ac9053d2
// SPDX-License-Identifier: GPL-2.0
/**
* Device connections
*
* Copyright (C) 2018 Intel Corporation
* Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
*/
#include <linux/device.h>
static DEFINE_MUTEX(devcon_lock);
static LIST_HEAD(devcon_list);
/**
* device_connection_find_match - Find physical connection to a device
* @dev: Device with the connection
* @con_id: Identifier for the connection
* @data: Data for the match function
* @match: Function to check and convert the connection description
*
* Find a connection with unique identifier @con_id between @dev and another
* device. @match will be used to convert the connection description to data the
* caller is expecting to be returned.
*/
void *device_connection_find_match(struct device *dev, const char *con_id,
void *data,
void *(*match)(struct device_connection *con,
int ep, void *data))
{
const char *devname = dev_name(dev);
struct device_connection *con;
void *ret = NULL;
int ep;
if (!match)
return NULL;
mutex_lock(&devcon_lock);
list_for_each_entry(con, &devcon_list, list) {
ep = match_string(con->endpoint, 2, devname);
if (ep < 0)
continue;
if (con_id && strcmp(con->id, con_id))
continue;
ret = match(con, !ep, data);
if (ret)
break;
}
mutex_unlock(&devcon_lock);
return ret;
}
EXPORT_SYMBOL_GPL(device_connection_find_match);
extern struct bus_type platform_bus_type;
extern struct bus_type pci_bus_type;
extern struct bus_type i2c_bus_type;
extern struct bus_type spi_bus_type;
static struct bus_type *generic_match_buses[] = {
&platform_bus_type,
#ifdef CONFIG_PCI
&pci_bus_type,
#endif
#ifdef CONFIG_I2C
&i2c_bus_type,
#endif
#ifdef CONFIG_SPI_MASTER
&spi_bus_type,
#endif
NULL,
};
/* This tries to find the device from the most common bus types by name. */
static void *generic_match(struct device_connection *con, int ep, void *data)
{
struct bus_type *bus;
struct device *dev;
for (bus = generic_match_buses[0]; bus; bus++) {
dev = bus_find_device_by_name(bus, NULL, con->endpoint[ep]);
if (dev)
return dev;
}
/*
* We only get called if a connection was found, tell the caller to
* wait for the other device to show up.
*/
return ERR_PTR(-EPROBE_DEFER);
}
/**
* device_connection_find - Find two devices connected together
* @dev: Device with the connection
* @con_id: Identifier for the connection
*
* Find a connection with unique identifier @con_id between @dev and
* another device. On success returns handle to the device that is connected
* to @dev, with the reference count for the found device incremented. Returns
* NULL if no matching connection was found, or ERR_PTR(-EPROBE_DEFER) when a
* connection was found but the other device has not been enumerated yet.
*/
struct device *device_connection_find(struct device *dev, const char *con_id)
{
return device_connection_find_match(dev, con_id, NULL, generic_match);
}
EXPORT_SYMBOL_GPL(device_connection_find);
/**
* device_connection_add - Register a connection description
* @con: The connection description to be registered
*/
void device_connection_add(struct device_connection *con)
{
mutex_lock(&devcon_lock);
list_add_tail(&con->list, &devcon_list);
mutex_unlock(&devcon_lock);
}
EXPORT_SYMBOL_GPL(device_connection_add);
/**
* device_connections_remove - Unregister connection description
* @con: The connection description to be unregistered
*/
void device_connection_remove(struct device_connection *con)
{
mutex_lock(&devcon_lock);
list_del(&con->list);
mutex_unlock(&devcon_lock);
}
EXPORT_SYMBOL_GPL(device_connection_remove);
drivers/extcon/Kconfig
View file @ ac9053d2
......@@ -30,7 +30,8 @@ config EXTCON_ARIZONA
config EXTCON_AXP288
tristate "X-Power AXP288 EXTCON support"
depends on MFD_AXP20X && USB_PHY
depends on MFD_AXP20X && USB_SUPPORT && X86
select USB_ROLE_SWITCH
help
Say Y here to enable support for USB peripheral detection
and USB MUX switching by X-Power AXP288 PMIC.
......
drivers/extcon/extcon-axp288.c
View file @ ac9053d2
/*
* extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
*
* Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2015 Intel Corporation
* Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
*
......@@ -14,6 +15,7 @@
* GNU General Public License for more details.
*/
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/io.h>
......@@ -25,6 +27,11 @@
#include <linux/extcon-provider.h>
#include <linux/regmap.h>
#include <linux/mfd/axp20x.h>
#include <linux/usb/role.h>
#include <linux/workqueue.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
/* Power source status register */
#define PS_STAT_VBUS_TRIGGER BIT(0)
......@@ -97,9 +104,19 @@ struct axp288_extcon_info {
struct device *dev;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
struct usb_role_switch *role_sw;
struct work_struct role_work;
int irq[EXTCON_IRQ_END];
struct extcon_dev *edev;
struct extcon_dev *id_extcon;
struct notifier_block id_nb;
unsigned int previous_cable;
bool vbus_attach;
};
static const struct x86_cpu_id cherry_trail_cpu_ids[] = {
{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT, X86_FEATURE_ANY },
{}
};
/* Power up/down reason string array */
......@@ -137,20 +154,74 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
}
static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
/*
* The below code to control the USB role-switch on devices with an AXP288
* may seem out of place, but there are 2 reasons why this is the best place
* to control the USB role-switch on such devices:
* 1) On many devices the USB role is controlled by AML code, but the AML code
* only switches between the host and none roles, because of Windows not
* really using device mode. To make device mode work we need to toggle
* between the none/device roles based on Vbus presence, and this driver
* gets interrupts on Vbus insertion / removal.
* 2) In order for our BC1.2 charger detection to work properly the role
* mux must be properly set to device mode before we do the detection.
*/
/* Returns the id-pin value, note pulled low / false == host-mode */
static bool axp288_get_id_pin(struct axp288_extcon_info *info)
{
int ret, stat, cfg, pwr_stat;
u8 chrg_type;
unsigned int cable = info->previous_cable;
bool vbus_attach = false;
enum usb_role role;
if (info->id_extcon)
return extcon_get_state(info->id_extcon, EXTCON_USB_HOST) <= 0;
/* We cannot access the id-pin, see what mode the AML code has set */
role = usb_role_switch_get_role(info->role_sw);
return role != USB_ROLE_HOST;
}
static void axp288_usb_role_work(struct work_struct *work)
{
struct axp288_extcon_info *info =
container_of(work, struct axp288_extcon_info, role_work);
enum usb_role role;
bool id_pin;
int ret;
id_pin = axp288_get_id_pin(info);
if (!id_pin)
role = USB_ROLE_HOST;
else if (info->vbus_attach)
role = USB_ROLE_DEVICE;
else
role = USB_ROLE_NONE;
ret = usb_role_switch_set_role(info->role_sw, role);
if (ret)
dev_err(info->dev, "failed to set role: %d\n", ret);
}
static bool axp288_get_vbus_attach(struct axp288_extcon_info *info)
{
int ret, pwr_stat;
ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat);
if (ret < 0) {
dev_err(info->dev, "failed to read vbus status\n");
return ret;
return false;
}
vbus_attach = (pwr_stat & PS_STAT_VBUS_VALID);
return !!(pwr_stat & PS_STAT_VBUS_VALID);
}
static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
{
int ret, stat, cfg;
u8 chrg_type;
unsigned int cable = info->previous_cable;
bool vbus_attach = false;
vbus_attach = axp288_get_vbus_attach(info);
if (!vbus_attach)
goto no_vbus;
......@@ -201,6 +272,12 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
info->previous_cable = cable;
}
if (info->role_sw && info->vbus_attach != vbus_attach) {
info->vbus_attach = vbus_attach;
/* Setting the role can take a while */
queue_work(system_long_wq, &info->role_work);
}
return 0;
dev_det_ret:
......@@ -210,6 +287,18 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
return ret;
}
static int axp288_extcon_id_evt(struct notifier_block *nb,
unsigned long event, void *param)
{
struct axp288_extcon_info *info =
container_of(nb, struct axp288_extcon_info, id_nb);
/* We may not sleep and setting the role can take a while */
queue_work(system_long_wq, &info->role_work);
return NOTIFY_OK;
}
static irqreturn_t axp288_extcon_isr(int irq, void *data)
{
struct axp288_extcon_info *info = data;
......@@ -231,10 +320,20 @@ static void axp288_extcon_enable(struct axp288_extcon_info *info)
BC_GLOBAL_RUN, BC_GLOBAL_RUN);
}
static void axp288_put_role_sw(void *data)
{
struct axp288_extcon_info *info = data;
cancel_work_sync(&info->role_work);
usb_role_switch_put(info->role_sw);
}
static int axp288_extcon_probe(struct platform_device *pdev)
{
struct axp288_extcon_info *info;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
struct device *dev = &pdev->dev;
const char *name;
int ret, i, pirq;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
......@@ -245,9 +344,33 @@ static int axp288_extcon_probe(struct platform_device *pdev)
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->previous_cable = EXTCON_NONE;
INIT_WORK(&info->role_work, axp288_usb_role_work);
info->id_nb.notifier_call = axp288_extcon_id_evt;
platform_set_drvdata(pdev, info);
info->role_sw = usb_role_switch_get(dev);
if (IS_ERR(info->role_sw))
return PTR_ERR(info->role_sw);
if (info->role_sw) {
ret = devm_add_action_or_reset(dev, axp288_put_role_sw, info);
if (ret)
return ret;
name = acpi_dev_get_first_match_name("INT3496", NULL, -1);
if (name) {
info->id_extcon = extcon_get_extcon_dev(name);
if (!info->id_extcon)
return -EPROBE_DEFER;
dev_info(dev, "controlling USB role\n");
} else {
dev_info(dev, "controlling USB role based on Vbus presence\n");
}
}
info->vbus_attach = axp288_get_vbus_attach(info);
axp288_extcon_log_rsi(info);
/* Initialize extcon device */
......@@ -289,6 +412,19 @@ static int axp288_extcon_probe(struct platform_device *pdev)
}
}
if (info->id_extcon) {
ret = devm_extcon_register_notifier_all(dev, info->id_extcon,
&info->id_nb);
if (ret)
return ret;
}
/* Make sure the role-sw is set correctly before doing BC detection */
if (info->role_sw) {
queue_work(system_long_wq, &info->role_work);
flush_work(&info->role_work);
}
/* Start charger cable type detection */
axp288_extcon_enable(info);
......@@ -308,8 +444,32 @@ static struct platform_driver axp288_extcon_driver = {
.name = "axp288_extcon",
},
};
module_platform_driver(axp288_extcon_driver);
static struct device_connection axp288_extcon_role_sw_conn = {
.endpoint[0] = "axp288_extcon",
.endpoint[1] = "intel_xhci_usb_sw-role-switch",
.id = "usb-role-switch",
};
static int __init axp288_extcon_init(void)
{
if (x86_match_cpu(cherry_trail_cpu_ids))
device_connection_add(&axp288_extcon_role_sw_conn);
return platform_driver_register(&axp288_extcon_driver);
}
module_init(axp288_extcon_init);
static void __exit axp288_extcon_exit(void)
{
if (x86_match_cpu(cherry_trail_cpu_ids))
device_connection_remove(&axp288_extcon_role_sw_conn);
platform_driver_unregister(&axp288_extcon_driver);
}
module_exit(axp288_extcon_exit);
MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("X-Powers AXP288 extcon driver");
MODULE_LICENSE("GPL v2");
drivers/phy/allwinner/phy-sun4i-usb.c
View file @ ac9053d2
......@@ -112,6 +112,7 @@ enum sun4i_usb_phy_type {
sun8i_a33_phy,
sun8i_a83t_phy,
sun8i_h3_phy,
sun8i_r40_phy,
sun8i_v3s_phy,
sun50i_a64_phy,
};
......@@ -410,11 +411,13 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
return true;
/*
* The A31 companion pmic (axp221) does not generate vbus change
* interrupts when the board is driving vbus, so we must poll
* The A31/A23/A33 companion pmics (AXP221/AXP223) do not
* generate vbus change interrupts when the board is driving
* vbus using the N_VBUSEN pin on the pmic, so we must poll
* when using the pmic for vbus-det _and_ we're driving vbus.
*/
if (data->cfg->type == sun6i_a31_phy &&
if ((data->cfg->type == sun6i_a31_phy ||
data->cfg->type == sun8i_a33_phy) &&
data->vbus_power_supply && data->phys[0].regulator_on)
return true;
......@@ -885,7 +888,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.num_phys = 2,
.type = sun4i_a10_phy,
.type = sun6i_a31_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
......@@ -919,6 +922,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.phy0_dual_route = true,
};
static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
.num_phys = 3,
.type = sun8i_r40_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
.phy0_dual_route = true,
};
static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
.num_phys = 1,
.type = sun8i_v3s_phy,
......@@ -948,6 +961,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-a83t-usb-phy", .data = &sun8i_a83t_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
{ .compatible = "allwinner,sun8i-r40-usb-phy", .data = &sun8i_r40_cfg },
{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
{ .compatible = "allwinner,sun50i-a64-usb-phy",
.data = &sun50i_a64_cfg},
......
drivers/phy/amlogic/Kconfig
View file @ ac9053d2
......@@ -18,10 +18,21 @@ config PHY_MESON_GXL_USB2
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on USB_SUPPORT
select USB_COMMON
select GENERIC_PHY
select REGMAP_MMIO
help
Enable this to support the Meson USB2 PHYs found in Meson
GXL and GXM SoCs.
If unsure, say N.
config PHY_MESON_GXL_USB3
tristate "Meson GXL and GXM USB3 PHY drivers"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on USB_SUPPORT
select GENERIC_PHY
select REGMAP_MMIO
help
Enable this to support the Meson USB3 PHY and OTG detection
IP block found in Meson GXL and GXM SoCs.
If unsure, say N.
drivers/phy/amlogic/Makefile
View file @ ac9053d2
obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o
obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o
drivers/phy/amlogic/phy-meson-gxl-usb2.c
View file @ ac9053d2
......@@ -11,14 +11,15 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/usb/of.h>
/* bits [31:27] are read-only */
#define U2P_R0 0x0
......@@ -70,12 +71,11 @@
/* bits [31:14] are read-only */
#define U2P_R2 0x8
#define U2P_R2_DATA_IN_MASK GENMASK(3, 0)
#define U2P_R2_DATA_IN_EN_MASK GENMASK(7, 4)
#define U2P_R2_ADDR_MASK GENMASK(11, 8)
#define U2P_R2_DATA_OUT_SEL BIT(12)
#define U2P_R2_CLK BIT(13)
#define U2P_R2_DATA_OUT_MASK GENMASK(17, 14)
#define U2P_R2_TESTDATA_IN_MASK GENMASK(7, 0)
#define U2P_R2_TESTADDR_MASK GENMASK(11, 8)
#define U2P_R2_TESTDATA_OUT_SEL BIT(12)
#define U2P_R2_TESTCLK BIT(13)
#define U2P_R2_TESTDATA_OUT_MASK GENMASK(17, 14)
#define U2P_R2_ACA_PIN_RANGE_C BIT(18)
#define U2P_R2_ACA_PIN_RANGE_B BIT(19)
#define U2P_R2_ACA_PIN_RANGE_A BIT(20)
......@@ -99,6 +99,8 @@ struct phy_meson_gxl_usb2_priv {
struct regmap *regmap;
enum phy_mode mode;
int is_enabled;
struct clk *clk;
struct reset_control *reset;
};
static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = {
......@@ -108,6 +110,31 @@ static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = {
.max_register = U2P_R3,
};
static int phy_meson_gxl_usb2_init(struct phy *phy)
{
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
int ret;
ret = reset_control_reset(priv->reset);
if (ret)
return ret;
ret = clk_prepare_enable(priv->clk);
if (ret)
return ret;
return 0;
}
static int phy_meson_gxl_usb2_exit(struct phy *phy)
{
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
clk_disable_unprepare(priv->clk);
return 0;
}
static int phy_meson_gxl_usb2_reset(struct phy *phy)
{
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
......@@ -195,6 +222,8 @@ static int phy_meson_gxl_usb2_power_on(struct phy *phy)
}
static const struct phy_ops phy_meson_gxl_usb2_ops = {
.init = phy_meson_gxl_usb2_init,
.exit = phy_meson_gxl_usb2_exit,
.power_on = phy_meson_gxl_usb2_power_on,
.power_off = phy_meson_gxl_usb2_power_off,
.set_mode = phy_meson_gxl_usb2_set_mode,
......@@ -210,6 +239,7 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
struct phy_meson_gxl_usb2_priv *priv;
struct phy *phy;
void __iomem *base;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
......@@ -222,28 +252,34 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
switch (of_usb_get_dr_mode_by_phy(dev->of_node, -1)) {
case USB_DR_MODE_PERIPHERAL:
priv->mode = PHY_MODE_USB_DEVICE;
break;
case USB_DR_MODE_OTG:
priv->mode = PHY_MODE_USB_OTG;
break;
case USB_DR_MODE_HOST:
default:
priv->mode = PHY_MODE_USB_HOST;
break;
}
/* start in host mode */
priv->mode = PHY_MODE_USB_HOST;
priv->regmap = devm_regmap_init_mmio(dev, base,
&phy_meson_gxl_usb2_regmap_conf);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
priv->clk = devm_clk_get(dev, "phy");
if (IS_ERR(priv->clk)) {
ret = PTR_ERR(priv->clk);
if (ret == -ENOENT)
priv->clk = NULL;
else
return ret;
}
priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
if (IS_ERR(priv->reset))
return PTR_ERR(priv->reset);
phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create PHY\n");
return PTR_ERR(phy);
ret = PTR_ERR(phy);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to create PHY\n");
return ret;
}
phy_set_drvdata(phy, priv);
......
drivers/phy/amlogic/phy-meson-gxl-usb3.c 0 → 100644
View file @ ac9053d2
// SPDX-License-Identifier: GPL-2.0
/*
* Meson GXL USB3 PHY and OTG mode detection driver
*
* Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/platform_device.h>
#define USB_R0 0x00
#define USB_R0_P30_FSEL_MASK GENMASK(5, 0)
#define USB_R0_P30_PHY_RESET BIT(6)
#define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7)
#define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8)
#define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9)
#define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14)
#define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17)
#define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18)
#define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19)
#define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29)
#define USB_R0_U2D_ACT BIT(31)
#define USB_R1 0x04
#define USB_R1_U3H_BIGENDIAN_GS BIT(0)
#define USB_R1_U3H_PME_ENABLE BIT(1)
#define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2)
#define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7)
#define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12)
#define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16)
#define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17)
#define USB_R1_U3H_HOST_MSI_ENABLE BIT(18)
#define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19)
#define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25)
#define USB_R2 0x08
#define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0)
#define USB_R2_P30_CR_READ BIT(16)
#define USB_R2_P30_CR_WRITE BIT(17)
#define USB_R2_P30_CR_CAP_ADDR BIT(18)
#define USB_R2_P30_CR_CAP_DATA BIT(19)
#define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20)
#define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26)
#define USB_R3 0x0c
#define USB_R3_P30_SSC_ENABLE BIT(0)
#define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1)
#define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4)
#define USB_R3_P30_REF_SSP_EN BIT(13)
#define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16)
#define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19)
#define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24)
#define USB_R4 0x10
#define USB_R4_P21_PORT_RESET_0 BIT(0)
#define USB_R4_P21_SLEEP_M0 BIT(1)
#define USB_R4_MEM_PD_MASK GENMASK(3, 2)
#define USB_R4_P21_ONLY BIT(4)
#define USB_R5 0x14
#define USB_R5_ID_DIG_SYNC BIT(0)
#define USB_R5_ID_DIG_REG BIT(1)
#define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2)
#define USB_R5_ID_DIG_EN_0 BIT(4)
#define USB_R5_ID_DIG_EN_1 BIT(5)
#define USB_R5_ID_DIG_CURR BIT(6)
#define USB_R5_ID_DIG_IRQ BIT(7)
#define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8)
#define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16)
/* read-only register */
#define USB_R6 0x18
#define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0)
#define USB_R6_P30_CR_ACK BIT(16)
struct phy_meson_gxl_usb3_priv {
struct regmap *regmap;
enum phy_mode mode;
struct clk *clk_phy;
struct clk *clk_peripheral;
struct reset_control *reset;
};
static const struct regmap_config phy_meson_gxl_usb3_regmap_conf = {
.reg_bits = 8,
.val_bits = 32,
.reg_stride = 4,
.max_register = USB_R6,
};
static int phy_meson_gxl_usb3_power_on(struct phy *phy)
{
struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0,
USB_R5_ID_DIG_EN_0);
regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1,
USB_R5_ID_DIG_EN_1);
regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_TH_MASK,
FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff));
return 0;
}
static int phy_meson_gxl_usb3_power_off(struct phy *phy)
{
struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, 0);
regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, 0);
return 0;
}
static int phy_meson_gxl_usb3_set_mode(struct phy *phy, enum phy_mode mode)
{
struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
switch (mode) {
case PHY_MODE_USB_HOST:
regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, 0);
regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0,
0);
break;
case PHY_MODE_USB_DEVICE:
regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT,
USB_R0_U2D_ACT);
regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0,
USB_R4_P21_SLEEP_M0);
break;
default:
dev_err(&phy->dev, "unsupported PHY mode %d\n", mode);
return -EINVAL;
}
priv->mode = mode;
return 0;
}
static int phy_meson_gxl_usb3_init(struct phy *phy)
{
struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
int ret;
ret = reset_control_reset(priv->reset);
if (ret)
goto err;
ret = clk_prepare_enable(priv->clk_phy);
if (ret)
goto err;
ret = clk_prepare_enable(priv->clk_peripheral);
if (ret)
goto err_disable_clk_phy;
ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode);
if (ret)
goto err_disable_clk_peripheral;
regmap_update_bits(priv->regmap, USB_R1,
USB_R1_U3H_FLADJ_30MHZ_REG_MASK,
FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20));
return 0;
err_disable_clk_peripheral:
clk_disable_unprepare(priv->clk_peripheral);
err_disable_clk_phy:
clk_disable_unprepare(priv->clk_phy);
err:
return ret;
}
static int phy_meson_gxl_usb3_exit(struct phy *phy)
{
struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
clk_disable_unprepare(priv->clk_peripheral);
clk_disable_unprepare(priv->clk_phy);
return 0;
}
static const struct phy_ops phy_meson_gxl_usb3_ops = {
.power_on = phy_meson_gxl_usb3_power_on,
.power_off = phy_meson_gxl_usb3_power_off,
.set_mode = phy_meson_gxl_usb3_set_mode,
.init = phy_meson_gxl_usb3_init,
.exit = phy_meson_gxl_usb3_exit,
.owner = THIS_MODULE,
};
static int phy_meson_gxl_usb3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct phy_meson_gxl_usb3_priv *priv;
struct resource *res;
struct phy *phy;
struct phy_provider *phy_provider;
void __iomem *base;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
priv->regmap = devm_regmap_init_mmio(dev, base,
&phy_meson_gxl_usb3_regmap_conf);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
priv->clk_phy = devm_clk_get(dev, "phy");
if (IS_ERR(priv->clk_phy))
return PTR_ERR(priv->clk_phy);
priv->clk_peripheral = devm_clk_get(dev, "peripheral");
if (IS_ERR(priv->clk_peripheral))
return PTR_ERR(priv->clk_peripheral);
priv->reset = devm_reset_control_array_get_shared(dev);
if (IS_ERR(priv->reset))
return PTR_ERR(priv->reset);
/*
* default to host mode as hardware defaults and/or boot-loader
* behavior can result in this PHY starting up in device mode. this
* default and the initialization in phy_meson_gxl_usb3_init ensure
* that we reproducibly start in a known mode on all devices.
*/
priv->mode = PHY_MODE_USB_HOST;
phy = devm_phy_create(dev, np, &phy_meson_gxl_usb3_ops);
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to create PHY\n");
return ret;
}
phy_set_drvdata(phy, priv);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id phy_meson_gxl_usb3_of_match[] = {
{ .compatible = "amlogic,meson-gxl-usb3-phy", },
{ },
};
MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb3_of_match);
static struct platform_driver phy_meson_gxl_usb3_driver = {
.probe = phy_meson_gxl_usb3_probe,
.driver = {
.name = "phy-meson-gxl-usb3",
.of_match_table = phy_meson_gxl_usb3_of_match,
},
};
module_platform_driver(phy_meson_gxl_usb3_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
MODULE_DESCRIPTION("Meson GXL USB3 PHY and OTG detection driver");
MODULE_LICENSE("GPL v2");
drivers/phy/hisilicon/Kconfig
View file @ ac9053d2
......@@ -4,6 +4,7 @@
config PHY_HI6220_USB
tristate "hi6220 USB PHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
depends on HAS_IOMEM
select GENERIC_PHY
select MFD_SYSCON
help
......@@ -11,6 +12,25 @@ config PHY_HI6220_USB
To compile this driver as a module, choose M here.
config PHY_HISTB_COMBPHY
tristate "HiSilicon STB SoCs COMBPHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
Enable this to support the HISILICON STB SoCs COMBPHY.
If unsure, say N.
config PHY_HISI_INNO_USB2
tristate "HiSilicon INNO USB2 PHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
Support for INNO USB2 PHY on HiSilicon SoCs. This Phy supports
USB 1.5Mb/s, USB 12Mb/s, USB 480Mb/s speeds. It supports one
USB host port to accept one USB device.
config PHY_HIX5HD2_SATA
tristate "HIX5HD2 SATA PHY Driver"
depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
......
drivers/phy/hisilicon/Makefile
View file @ ac9053d2
obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
drivers/phy/hisilicon/phy-hisi-inno-usb2.c 0 → 100644
View file @ ac9053d2
/*
* HiSilicon INNO USB2 PHY Driver.
*
* Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/reset.h>
#define INNO_PHY_PORT_NUM 2
#define REF_CLK_STABLE_TIME 100 /* unit:us */
#define UTMI_CLK_STABLE_TIME 200 /* unit:us */
#define TEST_CLK_STABLE_TIME 2 /* unit:ms */
#define PHY_CLK_STABLE_TIME 2 /* unit:ms */
#define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */
#define POR_RST_COMPLETE_TIME 300 /* unit:us */
#define PHY_TEST_DATA GENMASK(7, 0)
#define PHY_TEST_ADDR GENMASK(15, 8)
#define PHY_TEST_PORT GENMASK(18, 16)
#define PHY_TEST_WREN BIT(21)
#define PHY_TEST_CLK BIT(22) /* rising edge active */
#define PHY_TEST_RST BIT(23) /* low active */
#define PHY_CLK_ENABLE BIT(2)
struct hisi_inno_phy_port {
struct reset_control *utmi_rst;
struct hisi_inno_phy_priv *priv;
};
struct hisi_inno_phy_priv {
void __iomem *mmio;
struct clk *ref_clk;
struct reset_control *por_rst;
struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
};
static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
u8 port, u32 addr, u32 data)
{
void __iomem *reg = priv->mmio;
u32 val;
val = (data & PHY_TEST_DATA) |
((addr << 8) & PHY_TEST_ADDR) |
((port << 16) & PHY_TEST_PORT) |
PHY_TEST_WREN | PHY_TEST_RST;
writel(val, reg);
val |= PHY_TEST_CLK;
writel(val, reg);
val &= ~PHY_TEST_CLK;
writel(val, reg);
}
static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv)
{
/* The phy clk is controlled by the port0 register 0x06. */
hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE);
msleep(PHY_CLK_STABLE_TIME);
}
static int hisi_inno_phy_init(struct phy *phy)
{
struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
struct hisi_inno_phy_priv *priv = port->priv;
int ret;
ret = clk_prepare_enable(priv->ref_clk);
if (ret)
return ret;
udelay(REF_CLK_STABLE_TIME);
reset_control_deassert(priv->por_rst);
udelay(POR_RST_COMPLETE_TIME);
/* Set up phy registers */
hisi_inno_phy_setup(priv);
reset_control_deassert(port->utmi_rst);
udelay(UTMI_RST_COMPLETE_TIME);
return 0;
}
static int hisi_inno_phy_exit(struct phy *phy)
{
struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
struct hisi_inno_phy_priv *priv = port->priv;
reset_control_assert(port->utmi_rst);
reset_control_assert(priv->por_rst);
clk_disable_unprepare(priv->ref_clk);
return 0;
}
static const struct phy_ops hisi_inno_phy_ops = {
.init = hisi_inno_phy_init,
.exit = hisi_inno_phy_exit,
.owner = THIS_MODULE,
};
static int hisi_inno_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct hisi_inno_phy_priv *priv;
struct phy_provider *provider;
struct device_node *child;
struct resource *res;
int i = 0;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->mmio)) {
ret = PTR_ERR(priv->mmio);
return ret;
}
priv->ref_clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->ref_clk))
return PTR_ERR(priv->ref_clk);
priv->por_rst = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(priv->por_rst))
return PTR_ERR(priv->por_rst);
for_each_child_of_node(np, child) {
struct reset_control *rst;
struct phy *phy;
rst = of_reset_control_get_exclusive(child, NULL);
if (IS_ERR(rst))
return PTR_ERR(rst);
priv->ports[i].utmi_rst = rst;
priv->ports[i].priv = priv;
phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
if (IS_ERR(phy))
return PTR_ERR(phy);
phy_set_bus_width(phy, 8);
phy_set_drvdata(phy, &priv->ports[i]);
i++;
if (i > INNO_PHY_PORT_NUM) {
dev_warn(dev, "Support %d ports in maximum\n", i);
break;
}
}
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(provider);
}
static const struct of_device_id hisi_inno_phy_of_match[] = {
{ .compatible = "hisilicon,inno-usb2-phy", },
{ .compatible = "hisilicon,hi3798cv200-usb2-phy", },
{ },
};
MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match);
static struct platform_driver hisi_inno_phy_driver = {
.probe = hisi_inno_phy_probe,
.driver = {
.name = "hisi-inno-phy",
.of_match_table = hisi_inno_phy_of_match,
}
};
module_platform_driver(hisi_inno_phy_driver);
MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver");
MODULE_LICENSE("GPL v2");
drivers/phy/hisilicon/phy-histb-combphy.c 0 → 100644
View file @ ac9053d2
/*
* COMBPHY driver for HiSilicon STB SoCs
*
* Copyright (C) 2016-2017 HiSilicon Co., Ltd. http://www.hisilicon.com
*
* Authors: Jianguo Sun <sunjianguo1@huawei.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <dt-bindings/phy/phy.h>
#define COMBPHY_MODE_PCIE 0
#define COMBPHY_MODE_USB3 1
#define COMBPHY_MODE_SATA 2
#define COMBPHY_CFG_REG 0x0
#define COMBPHY_BYPASS_CODEC BIT(31)
#define COMBPHY_TEST_WRITE BIT(24)
#define COMBPHY_TEST_DATA_SHIFT 20
#define COMBPHY_TEST_DATA_MASK GENMASK(23, 20)
#define COMBPHY_TEST_ADDR_SHIFT 12
#define COMBPHY_TEST_ADDR_MASK GENMASK(16, 12)
#define COMBPHY_CLKREF_OUT_OEN BIT(0)
struct histb_combphy_mode {
int fixed;
int select;
u32 reg;
u32 shift;
u32 mask;
};
struct histb_combphy_priv {
void __iomem *mmio;
struct regmap *syscon;
struct reset_control *por_rst;
struct clk *ref_clk;
struct phy *phy;
struct histb_combphy_mode mode;
};
static void nano_register_write(struct histb_combphy_priv *priv,
u32 addr, u32 data)
{
void __iomem *reg = priv->mmio + COMBPHY_CFG_REG;
u32 val;
/* Set up address and data for the write */
val = readl(reg);
val &= ~COMBPHY_TEST_ADDR_MASK;
val |= addr << COMBPHY_TEST_ADDR_SHIFT;
val &= ~COMBPHY_TEST_DATA_MASK;
val |= data << COMBPHY_TEST_DATA_SHIFT;
writel(val, reg);
/* Flip strobe control to trigger the write */
val &= ~COMBPHY_TEST_WRITE;
writel(val, reg);
val |= COMBPHY_TEST_WRITE;
writel(val, reg);
}
static int is_mode_fixed(struct histb_combphy_mode *mode)
{
return (mode->fixed != PHY_NONE) ? true : false;
}
static int histb_combphy_set_mode(struct histb_combphy_priv *priv)
{
struct histb_combphy_mode *mode = &priv->mode;
struct regmap *syscon = priv->syscon;
u32 hw_sel;
if (is_mode_fixed(mode))
return 0;
switch (mode->select) {
case PHY_TYPE_SATA:
hw_sel = COMBPHY_MODE_SATA;
break;
case PHY_TYPE_PCIE:
hw_sel = COMBPHY_MODE_PCIE;
break;
case PHY_TYPE_USB3:
hw_sel = COMBPHY_MODE_USB3;
break;
default:
return -EINVAL;
}
return regmap_update_bits(syscon, mode->reg, mode->mask,
hw_sel << mode->shift);
}
static int histb_combphy_init(struct phy *phy)
{
struct histb_combphy_priv *priv = phy_get_drvdata(phy);
u32 val;
int ret;
ret = histb_combphy_set_mode(priv);
if (ret)
return ret;
/* Clear bypass bit to enable encoding/decoding */
val = readl(priv->mmio + COMBPHY_CFG_REG);
val &= ~COMBPHY_BYPASS_CODEC;
writel(val, priv->mmio + COMBPHY_CFG_REG);
ret = clk_prepare_enable(priv->ref_clk);
if (ret)
return ret;
reset_control_deassert(priv->por_rst);
/* Enable EP clock */
val = readl(priv->mmio + COMBPHY_CFG_REG);
val |= COMBPHY_CLKREF_OUT_OEN;
writel(val, priv->mmio + COMBPHY_CFG_REG);
/* Need to wait for EP clock stable */
mdelay(5);
/* Configure nano phy registers as suggested by vendor */
nano_register_write(priv, 0x1, 0x8);
nano_register_write(priv, 0xc, 0x9);
nano_register_write(priv, 0x1a, 0x4);
return 0;
}
static int histb_combphy_exit(struct phy *phy)
{
struct histb_combphy_priv *priv = phy_get_drvdata(phy);
u32 val;
/* Disable EP clock */
val = readl(priv->mmio + COMBPHY_CFG_REG);
val &= ~COMBPHY_CLKREF_OUT_OEN;
writel(val, priv->mmio + COMBPHY_CFG_REG);
reset_control_assert(priv->por_rst);
clk_disable_unprepare(priv->ref_clk);
return 0;
}
static const struct phy_ops histb_combphy_ops = {
.init = histb_combphy_init,
.exit = histb_combphy_exit,
.owner = THIS_MODULE,
};
static struct phy *histb_combphy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct histb_combphy_priv *priv = dev_get_drvdata(dev);
struct histb_combphy_mode *mode = &priv->mode;
if (args->args_count < 1) {
dev_err(dev, "invalid number of arguments\n");
return ERR_PTR(-EINVAL);
}
mode->select = args->args[0];
if (mode->select < PHY_TYPE_SATA || mode->select > PHY_TYPE_USB3) {
dev_err(dev, "invalid phy mode select argument\n");
return ERR_PTR(-EINVAL);
}
if (is_mode_fixed(mode) && mode->select != mode->fixed) {
dev_err(dev, "mode select %d mismatch fixed phy mode %d\n",
mode->select, mode->fixed);
return ERR_PTR(-EINVAL);
}
return priv->phy;
}
static int histb_combphy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
struct histb_combphy_priv *priv;
struct device_node *np = dev->of_node;
struct histb_combphy_mode *mode;
struct resource *res;
u32 vals[3];
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->mmio)) {
ret = PTR_ERR(priv->mmio);
return ret;
}
priv->syscon = syscon_node_to_regmap(np->parent);
if (IS_ERR(priv->syscon)) {
dev_err(dev, "failed to find peri_ctrl syscon regmap\n");
return PTR_ERR(priv->syscon);
}
mode = &priv->mode;
mode->fixed = PHY_NONE;
ret = of_property_read_u32(np, "hisilicon,fixed-mode", &mode->fixed);
if (ret == 0)
dev_dbg(dev, "found fixed phy mode %d\n", mode->fixed);
ret = of_property_read_u32_array(np, "hisilicon,mode-select-bits",
vals, ARRAY_SIZE(vals));
if (ret == 0) {
if (is_mode_fixed(mode)) {
dev_err(dev, "found select bits for fixed mode phy\n");
return -EINVAL;
}
mode->reg = vals[0];
mode->shift = vals[1];
mode->mask = vals[2];
dev_dbg(dev, "found mode select bits\n");
} else {
if (!is_mode_fixed(mode)) {
dev_err(dev, "no valid select bits found for non-fixed phy\n");
return -ENODEV;
}
}
priv->ref_clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->ref_clk)) {
dev_err(dev, "failed to find ref clock\n");
return PTR_ERR(priv->ref_clk);
}
priv->por_rst = devm_reset_control_get(dev, NULL);
if (IS_ERR(priv->por_rst)) {
dev_err(dev, "failed to get poweron reset\n");
return PTR_ERR(priv->por_rst);
}
priv->phy = devm_phy_create(dev, NULL, &histb_combphy_ops);
if (IS_ERR(priv->phy)) {
dev_err(dev, "failed to create combphy\n");
return PTR_ERR(priv->phy);
}
dev_set_drvdata(dev, priv);
phy_set_drvdata(priv->phy, priv);
phy_provider = devm_of_phy_provider_register(dev, histb_combphy_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id histb_combphy_of_match[] = {
{ .compatible = "hisilicon,hi3798cv200-combphy" },
{ },
};
MODULE_DEVICE_TABLE(of, histb_combphy_of_match);
static struct platform_driver histb_combphy_driver = {
.probe = histb_combphy_probe,
.driver = {
.name = "combphy",
.of_match_table = histb_combphy_of_match,
},
};
module_platform_driver(histb_combphy_driver);
MODULE_DESCRIPTION("HiSilicon STB COMBPHY driver");
MODULE_LICENSE("GPL v2");
drivers/phy/marvell/phy-berlin-usb.c
View file @ ac9053d2
......@@ -127,7 +127,7 @@ static int phy_berlin_usb_power_on(struct phy *phy)
writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5),
priv->base + USB_PHY_ANALOG);
writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 |
DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
DISCON_THRESHOLD_270 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL);
writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1);
......
drivers/phy/mediatek/phy-mtk-tphy.c
View file @ ac9053d2
......@@ -306,6 +306,8 @@ struct mtk_tphy {
const struct mtk_phy_pdata *pdata;
struct mtk_phy_instance **phys;
int nphys;
int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
int src_coef; /* coefficient for slew rate calibrate */
};
static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
......@@ -360,16 +362,17 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
if (fm_out) {
/* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */
tmp = U3P_FM_DET_CYCLE_CNT * U3P_REF_CLK * U3P_SLEW_RATE_COEF;
tmp /= fm_out;
/* ( 1024 / FM_OUT ) x reference clock frequency x coef */
tmp = tphy->src_ref_clk * tphy->src_coef;
tmp = (tmp * U3P_FM_DET_CYCLE_CNT) / fm_out;
calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR);
} else {
/* if FM detection fail, set default value */
calibration_val = 4;
}
dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d\n",
instance->index, fm_out, calibration_val);
dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n",
instance->index, fm_out, calibration_val,
tphy->src_ref_clk, tphy->src_coef);
/* set HS slew rate */
tmp = readl(com + U3P_USBPHYACR5);
......@@ -688,8 +691,7 @@ static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
u32 tmp;
tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN |
P3C_REG_IP_SW_RST);
tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST);
writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
......@@ -1042,6 +1044,13 @@ static int mtk_tphy_probe(struct platform_device *pdev)
tphy->u3phya_ref = NULL;
}
tphy->src_ref_clk = U3P_REF_CLK;
tphy->src_coef = U3P_SLEW_RATE_COEF;
/* update parameters of slew rate calibrate if exist */
device_property_read_u32(dev, "mediatek,src-ref-clk-mhz",
&tphy->src_ref_clk);
device_property_read_u32(dev, "mediatek,src-coef", &tphy->src_coef);
port = 0;
for_each_child_of_node(np, child_np) {
struct mtk_phy_instance *instance;
......
drivers/phy/motorola/Kconfig
View file @ ac9053d2
......@@ -10,3 +10,11 @@ config PHY_CPCAP_USB
help
Enable this for USB to work on Motorola phones and tablets
such as Droid 4.
config PHY_MAPPHONE_MDM6600
tristate "Motorola Mapphone MDM6600 modem USB PHY driver"
depends on OF && USB_SUPPORT
select GENERIC_PHY
help
Enable this for MDM6600 USB modem to work on Motorola phones
and tablets such as Droid 4.
drivers/phy/motorola/Makefile
View file @ ac9053d2
......@@ -3,3 +3,4 @@
#
obj-$(CONFIG_PHY_CPCAP_USB) += phy-cpcap-usb.o
obj-$(CONFIG_PHY_MAPPHONE_MDM6600) += phy-mapphone-mdm6600.o
drivers/phy/motorola/phy-mapphone-mdm6600.c 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/phy/phy-core.c
View file @ ac9053d2
......@@ -351,6 +351,8 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
mutex_lock(&phy->mutex);
ret = phy->ops->set_mode(phy, mode);
if (!ret)
phy->attrs.mode = mode;
mutex_unlock(&phy->mutex);
return ret;
......
drivers/phy/phy-lpc18xx-usb-otg.c
View file @ ac9053d2
......@@ -60,8 +60,14 @@ static int lpc18xx_usb_otg_phy_power_on(struct phy *phy)
return ret;
/* The bit in CREG is cleared to enable the PHY */
return regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
ret = regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
LPC18XX_CREG_CREG0_USB0PHY, 0);
if (ret) {
clk_disable(lpc->clk);
return ret;
}
return 0;
}
static int lpc18xx_usb_otg_phy_power_off(struct phy *phy)
......
drivers/phy/qualcomm/phy-qcom-qmp.c
View file @ ac9053d2
This diff is collapsed.
drivers/phy/qualcomm/phy-qcom-qmp.h 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/phy/qualcomm/phy-qcom-qusb2.c
View file @ ac9053d2
This diff is collapsed.
drivers/phy/ralink/Kconfig
View file @ ac9053d2
......@@ -4,6 +4,7 @@
config PHY_RALINK_USB
tristate "Ralink USB PHY driver"
depends on RALINK || COMPILE_TEST
depends on HAS_IOMEM
select GENERIC_PHY
select MFD_SYSCON
help
......
drivers/phy/renesas/phy-rcar-gen3-usb2.c
View file @ ac9053d2
......@@ -396,6 +396,10 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
.compatible = "renesas,usb2-phy-r8a7796",
.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
},
{
.compatible = "renesas,usb2-phy-r8a77965",
.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
},
{
.compatible = "renesas,rcar-gen3-usb2-phy",
},
......
drivers/phy/rockchip/Kconfig
View file @ ac9053d2
......@@ -29,6 +29,7 @@ config PHY_ROCKCHIP_INNO_USB2
config PHY_ROCKCHIP_PCIE
tristate "Rockchip PCIe PHY Driver"
depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
depends on HAS_IOMEM
select GENERIC_PHY
select MFD_SYSCON
help
......
drivers/phy/rockchip/phy-rockchip-emmc.c
View file @ ac9053d2
......@@ -76,6 +76,13 @@
#define PHYCTRL_OTAPDLYSEL_MASK 0xf
#define PHYCTRL_OTAPDLYSEL_SHIFT 0x7
#define PHYCTRL_IS_CALDONE(x) \
((((x) >> PHYCTRL_CALDONE_SHIFT) & \
PHYCTRL_CALDONE_MASK) == PHYCTRL_CALDONE_DONE)
#define PHYCTRL_IS_DLLRDY(x) \
((((x) >> PHYCTRL_DLLRDY_SHIFT) & \
PHYCTRL_DLLRDY_MASK) == PHYCTRL_DLLRDY_DONE)
struct rockchip_emmc_phy {
unsigned int reg_offset;
struct regmap *reg_base;
......@@ -89,7 +96,7 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
unsigned int dllrdy;
unsigned int freqsel = PHYCTRL_FREQSEL_200M;
unsigned long rate;
unsigned long timeout;
int ret;
/*
* Keep phyctrl_pdb and phyctrl_endll low to allow
......@@ -160,17 +167,19 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
PHYCTRL_PDB_SHIFT));
/*
* According to the user manual, it asks driver to
* wait 5us for calpad busy trimming
* According to the user manual, it asks driver to wait 5us for
* calpad busy trimming. However it is documented that this value is
* PVT(A.K.A process,voltage and temperature) relevant, so some
* failure cases are found which indicates we should be more tolerant
* to calpad busy trimming.
*/
udelay(5);
regmap_read(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
&caldone);
caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
if (caldone != PHYCTRL_CALDONE_DONE) {
pr_err("rockchip_emmc_phy_power: caldone timeout.\n");
return -ETIMEDOUT;
ret = regmap_read_poll_timeout(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
caldone, PHYCTRL_IS_CALDONE(caldone),
0, 50);
if (ret) {
pr_err("%s: caldone failed, ret=%d\n", __func__, ret);
return ret;
}
/* Set the frequency of the DLL operation */
......@@ -210,28 +219,15 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
* NOTE: There appear to be corner cases where the DLL seems to take
* extra long to lock for reasons that aren't understood. In some
* extreme cases we've seen it take up to over 10ms (!). We'll be
* generous and give it 50ms. We still busy wait here because:
* - In most cases it should be super fast.
* - This is not called lots during normal operation so it shouldn't
* be a power or performance problem to busy wait. We expect it
* only at boot / resume. In both cases, eMMC is probably on the
* critical path so busy waiting a little extra time should be OK.
* generous and give it 50ms.
*/
timeout = jiffies + msecs_to_jiffies(50);
do {
udelay(1);
regmap_read(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
&dllrdy);
dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK;
if (dllrdy == PHYCTRL_DLLRDY_DONE)
break;
} while (!time_after(jiffies, timeout));
if (dllrdy != PHYCTRL_DLLRDY_DONE) {
pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n");
return -ETIMEDOUT;
ret = regmap_read_poll_timeout(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
dllrdy, PHYCTRL_IS_DLLRDY(dllrdy),
0, 50 * USEC_PER_MSEC);
if (ret) {
pr_err("%s: dllrdy failed. ret=%d\n", __func__, ret);
return ret;
}
return 0;
......
drivers/phy/rockchip/phy-rockchip-typec.c
View file @ ac9053d2
This diff is collapsed.
drivers/phy/samsung/Kconfig
View file @ ac9053d2
......@@ -49,7 +49,7 @@ config PHY_EXYNOS4210_USB2
config PHY_EXYNOS4X12_USB2
bool
depends on PHY_SAMSUNG_USB2
default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
default SOC_EXYNOS3250 || SOC_EXYNOS4412
config PHY_EXYNOS5250_USB2
bool
......
drivers/phy/st/Kconfig
View file @ ac9053d2
......@@ -31,3 +31,17 @@ config PHY_STIH407_USB
help
Enable this support to enable the picoPHY device used by USB2
and USB3 controllers on STMicroelectronics STiH407 SoC families.
config PHY_STM32_USBPHYC
tristate "STMicroelectronics STM32 USB HS PHY Controller driver"
depends on ARCH_STM32 || COMPILE_TEST
select GENERIC_PHY
help
Enable this to support the High-Speed USB transceivers that are part
of some STMicroelectronics STM32 SoCs.
This driver controls the entire USB PHY block: the USB PHY controller
(USBPHYC) and the two 8-bit wide UTMI+ interfaces. First interface is
used by an HS USB Host controller, and the second one is shared
between an HS USB OTG controller and an HS USB Host controller,
selected by a USB switch.
drivers/phy/st/Makefile
View file @ ac9053d2
......@@ -2,3 +2,4 @@ obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o
drivers/phy/st/phy-stm32-usbphyc.c 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/phy/tegra/xusb-tegra210.c
View file @ ac9053d2
......@@ -169,6 +169,7 @@
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN (1 << 0)
#define XUSB_PADCTL_UPHY_PLL_P0_CTL4 0x36c
#define XUSB_PADCTL_UPHY_PLL_CTL4_XDIGCLK_EN (1 << 19)
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_EN (1 << 15)
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT 12
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_MASK 0x3
......@@ -537,11 +538,8 @@ static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb)
value |= (XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SATA_VAL <<
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT);
/* XXX PLL0_XDIGCLK_EN */
/*
value &= ~(1 << 19);
value &= ~XUSB_PADCTL_UPHY_PLL_CTL4_XDIGCLK_EN;
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
*/
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_MASK <<
......
drivers/phy/tegra/xusb.c
View file @ ac9053d2
......@@ -418,7 +418,7 @@ tegra_xusb_port_find_lane(struct tegra_xusb_port *port,
{
struct tegra_xusb_lane *lane, *match = ERR_PTR(-ENODEV);
for (map = map; map->type; map++) {
for (; map->type; map++) {
if (port->index != map->port)
continue;
......
drivers/platform/x86/intel_cht_int33fe.c
View file @ ac9053d2
This diff is collapsed.
drivers/staging/typec/tcpci.c
View file @ ac9053d2
This diff is collapsed.
drivers/staging/typec/tcpci.h
View file @ ac9053d2
......@@ -121,4 +121,18 @@
#define TCPC_VBUS_VOLTAGE_ALARM_HI_CFG 0x76
#define TCPC_VBUS_VOLTAGE_ALARM_LO_CFG 0x78
struct tcpci;
struct tcpci_data {
struct regmap *regmap;
int (*init)(struct tcpci *tcpci, struct tcpci_data *data);
int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data,
bool enable);
int (*start_drp_toggling)(struct tcpci *tcpci, struct tcpci_data *data,
enum typec_cc_status cc);
};
struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data);
void tcpci_unregister_port(struct tcpci *tcpci);
irqreturn_t tcpci_irq(struct tcpci *tcpci);
#endif /* __LINUX_USB_TCPCI_H */
drivers/usb/Kconfig
View file @ ac9053d2
This diff is collapsed.
drivers/usb/Makefile
View file @ ac9053d2
......@@ -65,3 +65,5 @@ obj-$(CONFIG_USB_COMMON) += common/
obj-$(CONFIG_USBIP_CORE) += usbip/
obj-$(CONFIG_TYPEC) += typec/
obj-$(CONFIG_USB_ROLE_SWITCH) += roles/
drivers/usb/chipidea/ci_hdrc_imx.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/chipidea/debug.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/chipidea/host.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/chipidea/usbmisc_imx.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/common/Makefile
View file @ ac9053d2
This diff is collapsed.
drivers/usb/common/roles.c 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/Makefile
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/generic.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/hcd.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/hub.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/hub.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/phy.c 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/phy.h 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/port.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/quirks.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/urb.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/usb-acpi.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/usb.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/core/usb.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/core.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/core.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/core_intr.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/debugfs.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/gadget.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/hcd.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/hcd.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/hw.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/params.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/pci.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc2/platform.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/Makefile
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/core.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/core.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/debugfs.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/drd.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/dwc3-of-simple.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/dwc3-pci.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/ep0.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/dwc3/gadget.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/composite.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/function/f_fs.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/function/f_midi.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/function/f_tcm.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/legacy/mass_storage.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/u_f.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/atmel_usba_udc.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/atmel_usba_udc.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/bcm63xx_udc.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/bdc/bdc_ep.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/core.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/dummy_hcd.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/goku_udc.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/gr_udc.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/pxa25x_udc.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/gadget/udc/pxa27x_udc.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/Kconfig
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/Makefile
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/ehci-fsl.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/ehci-mem.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/ehci-platform.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/ehci-sched.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/ehci-tegra.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/fhci-dbg.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/imx21-dbg.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/isp116x-hcd.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/ohci-omap.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/ohci-platform.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/sl811-hcd.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/whci/debug.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci-dbgtty.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci-ext-caps.c 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci-ext-caps.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci-mem.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci-mtk.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci-pci.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci-plat.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci-ring.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/host/xhci.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/isp1760/isp1760-udc.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/misc/adutux.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/misc/chaoskey.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/misc/usbtest.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/misc/uss720.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/musb/musb_debugfs.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/musb/musb_gadget_ep0.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/phy/phy-ab8500-usb.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/phy/phy-generic.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/phy/phy-mxs-usb.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/phy/phy-tegra-usb.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/roles/Kconfig 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/roles/Makefile 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/roles/intel-xhci-usb-role-switch.c 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/serial/cp210x.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/serial/ftdi_sio.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/serial/ftdi_sio_ids.h
View file @ ac9053d2
This diff is collapsed.
drivers/usb/serial/option.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/Kconfig
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/Makefile
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/fusb302/fusb302.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/mux.c 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/mux/Kconfig 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/mux/Makefile 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/mux/pi3usb30532.c 0 → 100644
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/tcpm.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/tps6598x.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/typec_wcove.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/typec/ucsi/ucsi.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/usb-skeleton.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/usbip/Kconfig
View file @ ac9053d2
This diff is collapsed.
drivers/usb/wusbcore/crypto.c
View file @ ac9053d2
This diff is collapsed.
drivers/usb/wusbcore/wa-nep.c
View file @ ac9053d2
This diff is collapsed.
drivers/uwb/uwb-debug.c
View file @ ac9053d2
This diff is collapsed.
include/linux/device.h
View file @ ac9053d2
This diff is collapsed.
include/linux/phy/phy.h
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/composite.h
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/gadget.h
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/hcd.h
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/pd.h
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/pd_ado.h 0 → 100644
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/pd_ext_sdb.h 0 → 100644
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/role.h 0 → 100644
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/tcpm.h
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/typec.h
View file @ ac9053d2
This diff is collapsed.
include/linux/usb/typec_mux.h 0 → 100644
View file @ ac9053d2
This diff is collapsed.
tools/usb/usbip/libsrc/usbip_common.c
View file @ ac9053d2
This diff is collapsed.
tools/usb/usbip/libsrc/usbip_common.h
View file @ ac9053d2
This diff is collapsed.
tools/usb/usbip/libsrc/usbip_host_common.c
View file @ ac9053d2
This diff is collapsed.
tools/usb/usbip/src/usbip_attach.c
View file @ ac9053d2
This diff is collapsed.
tools/usb/usbip/src/usbip_list.c
View file @ ac9053d2
This diff is collapsed.
tools/usb/usbip/src/usbip_network.c
View file @ ac9053d2
This diff is collapsed.
tools/usb/usbip/src/usbip_network.h
View file @ ac9053d2
This diff is collapsed.
tools/usb/usbip/src/usbipd.c
View file @ ac9053d2
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7