Commit ac90aa02 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] saa7134: add media controller support

Register saa7134 at the media controller core and provide
support for both analog TV and DVB.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 7047f298
......@@ -806,6 +806,153 @@ static void must_configure_manually(int has_eeprom)
}
}
static void saa7134_unregister_media_device(struct saa7134_dev *dev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
if (!dev->media_dev)
return;
media_device_unregister(dev->media_dev);
media_device_cleanup(dev->media_dev);
kfree(dev->media_dev);
dev->media_dev = NULL;
#endif
}
static void saa7134_media_release(struct saa7134_dev *dev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
int i;
for (i = 0; i < SAA7134_INPUT_MAX + 1; i++)
media_device_unregister_entity(&dev->input_ent[i]);
#endif
}
static void saa7134_create_entities(struct saa7134_dev *dev)
{
#if defined(CONFIG_MEDIA_CONTROLLER)
int ret, i;
struct media_entity *entity;
struct media_entity *decoder = NULL;
/* Check if it is using an external analog TV demod */
media_device_for_each_entity(entity, dev->media_dev) {
if (entity->function == MEDIA_ENT_F_ATV_DECODER)
decoder = entity;
break;
}
/*
* saa713x is not using an external ATV demod.
* Register the internal one
*/
if (!decoder) {
dev->demod.name = "saa713x";
dev->demod_pad[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
dev->demod_pad[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
dev->demod_pad[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
dev->demod.function = MEDIA_ENT_F_ATV_DECODER;
ret = media_entity_pads_init(&dev->demod, DEMOD_NUM_PADS,
dev->demod_pad);
if (ret < 0)
pr_err("failed to initialize demod pad!\n");
ret = media_device_register_entity(dev->media_dev, &dev->demod);
if (ret < 0)
pr_err("failed to register demod entity!\n");
dev->decoder = &dev->demod;
} else {
dev->decoder = decoder;
}
/* Initialize Video, VBI and Radio pads */
dev->video_pad.flags = MEDIA_PAD_FL_SINK;
ret = media_entity_pads_init(&dev->video_dev->entity, 1,
&dev->video_pad);
if (ret < 0)
pr_err("failed to initialize video media entity!\n");
dev->vbi_pad.flags = MEDIA_PAD_FL_SINK;
ret = media_entity_pads_init(&dev->vbi_dev->entity, 1,
&dev->vbi_pad);
if (ret < 0)
pr_err("failed to initialize vbi media entity!\n");
/* Create entities for each input connector */
for (i = 0; i < SAA7134_INPUT_MAX; i++) {
struct media_entity *ent = &dev->input_ent[i];
struct saa7134_input *in = &card_in(dev, i);
if (in->type == SAA7134_NO_INPUT)
break;
/* This input uses the S-Video connector */
if (in->type == SAA7134_INPUT_COMPOSITE_OVER_SVIDEO)
continue;
ent->name = saa7134_input_name[in->type];
ent->flags = MEDIA_ENT_FL_CONNECTOR;
dev->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
switch (in->type) {
case SAA7134_INPUT_COMPOSITE:
case SAA7134_INPUT_COMPOSITE0:
case SAA7134_INPUT_COMPOSITE1:
case SAA7134_INPUT_COMPOSITE2:
case SAA7134_INPUT_COMPOSITE3:
case SAA7134_INPUT_COMPOSITE4:
ent->function = MEDIA_ENT_F_CONN_COMPOSITE;
break;
case SAA7134_INPUT_SVIDEO:
case SAA7134_INPUT_SVIDEO0:
case SAA7134_INPUT_SVIDEO1:
ent->function = MEDIA_ENT_F_CONN_SVIDEO;
break;
default:
/*
* SAA7134_INPUT_TV and SAA7134_INPUT_TV_MONO.
*
* Please notice that neither SAA7134_INPUT_MUTE or
* SAA7134_INPUT_RADIO are defined at
* saa7134_board.input.
*/
ent->function = MEDIA_ENT_F_CONN_RF;
break;
}
ret = media_entity_pads_init(ent, 1, &dev->input_pad[i]);
if (ret < 0)
pr_err("failed to initialize input pad[%d]!\n", i);
ret = media_device_register_entity(dev->media_dev, ent);
if (ret < 0)
pr_err("failed to register input entity %d!\n", i);
}
/* Create input for Radio RF connector */
if (card_has_radio(dev)) {
struct saa7134_input *in = &saa7134_boards[dev->board].radio;
struct media_entity *ent = &dev->input_ent[i];
ent->name = saa7134_input_name[in->type];
ent->flags = MEDIA_ENT_FL_CONNECTOR;
dev->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
ent->function = MEDIA_ENT_F_CONN_RF;
ret = media_entity_pads_init(ent, 1, &dev->input_pad[i]);
if (ret < 0)
pr_err("failed to initialize input pad[%d]!\n", i);
ret = media_device_register_entity(dev->media_dev, ent);
if (ret < 0)
pr_err("failed to register input entity %d!\n", i);
}
#endif
}
static struct video_device *vdev_init(struct saa7134_dev *dev,
struct video_device *template,
char *type)
......@@ -826,6 +973,8 @@ static struct video_device *vdev_init(struct saa7134_dev *dev,
static void saa7134_unregister_video(struct saa7134_dev *dev)
{
saa7134_media_release(dev);
if (dev->video_dev) {
if (video_is_registered(dev->video_dev))
video_unregister_device(dev->video_dev);
......@@ -889,6 +1038,18 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
if (NULL == dev)
return -ENOMEM;
dev->nr = saa7134_devcount;
sprintf(dev->name, "saa%x[%d]", pci_dev->device, dev->nr);
#ifdef CONFIG_MEDIA_CONTROLLER
dev->media_dev = v4l2_mc_pci_media_device_init(pci_dev, dev->name);
if (!dev->media_dev) {
err = -ENOMEM;
goto fail0;
}
dev->v4l2_dev.mdev = dev->media_dev;
#endif
err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
if (err)
goto fail0;
......@@ -900,9 +1061,6 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
goto fail1;
}
dev->nr = saa7134_devcount;
sprintf(dev->name,"saa%x[%d]",pci_dev->device,dev->nr);
/* pci quirks */
if (pci_pci_problems) {
if (pci_pci_problems & PCIPCI_TRITON)
......@@ -1102,6 +1260,15 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
dev->name, video_device_node_name(dev->radio_dev));
}
#ifdef CONFIG_MEDIA_CONTROLLER
saa7134_create_entities(dev);
err = v4l2_mc_create_media_graph(dev->media_dev);
if (err) {
pr_err("failed to create media graph\n");
goto fail5;
}
#endif
/* everything worked */
saa7134_devcount++;
......@@ -1109,6 +1276,18 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
saa7134_dmasound_init(dev);
request_submodules(dev);
/*
* Do it at the end, to reduce dynamic configuration changes during
* the device init. Yet, as request_modules() can be async, the
* topology will likely change after load the saa7134 subdrivers.
*/
#ifdef CONFIG_MEDIA_CONTROLLER
err = media_device_register(dev->media_dev);
if (err)
goto fail5;
#endif
return 0;
fail5:
......@@ -1126,6 +1305,9 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
fail1:
v4l2_device_unregister(&dev->v4l2_dev);
fail0:
#ifdef CONFIG_MEDIA_CONTROLLER
kfree(dev->media_dev);
#endif
kfree(dev);
return err;
}
......@@ -1188,9 +1370,10 @@ static void saa7134_finidev(struct pci_dev *pci_dev)
release_mem_region(pci_resource_start(pci_dev,0),
pci_resource_len(pci_dev,0));
v4l2_device_unregister(&dev->v4l2_dev);
saa7134_unregister_media_device(dev);
/* free memory */
kfree(dev);
}
......
......@@ -1883,8 +1883,15 @@ static int dvb_init(struct saa7134_dev *dev)
fe0->dvb.frontend->callback = saa7134_tuner_callback;
/* register everything else */
#ifndef CONFIG_MEDIA_CONTROLLER_DVB
ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
&dev->pci->dev, NULL, adapter_nr, 0);
&dev->pci->dev, NULL,
adapter_nr, 0);
#else
ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
&dev->pci->dev, dev->media_dev,
adapter_nr, 0);
#endif
/* this sequence is necessary to make the tda1004x load its firmware
* and to enter analog mode of hybrid boards
......
......@@ -785,6 +785,63 @@ static int stop_preview(struct saa7134_dev *dev)
return 0;
}
/*
* Media Controller helper functions
*/
static int saa7134_enable_analog_tuner(struct saa7134_dev *dev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_device *mdev = dev->media_dev;
struct media_entity *source;
struct media_link *link, *found_link = NULL;
int ret, active_links = 0;
if (!mdev || !dev->decoder)
return 0;
/*
* This will find the tuner that is connected into the decoder.
* Technically, this is not 100% correct, as the device may be
* using an analog input instead of the tuner. However, as we can't
* do DVB streaming while the DMA engine is being used for V4L2,
* this should be enough for the actual needs.
*/
list_for_each_entry(link, &dev->decoder->links, list) {
if (link->sink->entity == dev->decoder) {
found_link = link;
if (link->flags & MEDIA_LNK_FL_ENABLED)
active_links++;
break;
}
}
if (active_links == 1 || !found_link)
return 0;
source = found_link->source->entity;
list_for_each_entry(link, &source->links, list) {
struct media_entity *sink;
int flags = 0;
sink = link->sink->entity;
if (sink == dev->decoder)
flags = MEDIA_LNK_FL_ENABLED;
ret = media_entity_setup_link(link, flags);
if (ret) {
pr_err("Couldn't change link %s->%s to %s. Error %d\n",
source->name, sink->name,
flags ? "enabled" : "disabled",
ret);
return ret;
}
}
#endif
return 0;
}
/* ------------------------------------------------------------------ */
static int buffer_activate(struct saa7134_dev *dev,
......@@ -924,6 +981,9 @@ static int queue_setup(struct vb2_queue *q,
*nplanes = 1;
sizes[0] = size;
alloc_ctxs[0] = dev->alloc_ctx;
saa7134_enable_analog_tuner(dev);
return 0;
}
......
......@@ -671,6 +671,19 @@ struct saa7134_dev {
/* I2C keyboard data */
struct IR_i2c_init_data init_data;
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_device *media_dev;
struct media_entity input_ent[SAA7134_INPUT_MAX + 1];
struct media_pad input_pad[SAA7134_INPUT_MAX + 1];
struct media_entity demod;
struct media_pad demod_pad[DEMOD_NUM_PADS];
struct media_pad video_pad, vbi_pad;
struct media_entity *decoder;
#endif
#if IS_ENABLED(CONFIG_VIDEO_SAA7134_DVB)
/* SAA7134_MPEG_DVB only */
struct vb2_dvb_frontends frontends;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment