Commit ad037c1f authored by Tim Kryger's avatar Tim Kryger Committed by Thomas Gleixner

clocksource: Kona: Print warning rather than panic

Since there may be other clocksources available, this driver should not
trigger a panic simply because it can not determine the frequency of an
external clock.  This change refactors the driver to allow a warning to
be printed in this case instead.
Signed-off-by: default avatarTim Kryger <tim.kryger@linaro.org>
Reviewed-by: default avatarMarkus Mayer <markus.mayer@linaro.org>
Reviewed-by: default avatarMatt Porter <matt.porter@linaro.org>
Cc: Christian Daudt <bcm@fixthebug.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1391559304-26558-1-git-send-email-tim.kryger@linaro.orgSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent 80d767d7
...@@ -99,31 +99,6 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw) ...@@ -99,31 +99,6 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
return; return;
} }
static void __init kona_timers_init(struct device_node *node)
{
u32 freq;
struct clk *external_clk;
external_clk = of_clk_get_by_name(node, NULL);
if (!IS_ERR(external_clk)) {
arch_timer_rate = clk_get_rate(external_clk);
clk_prepare_enable(external_clk);
} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
arch_timer_rate = freq;
} else {
panic("unable to determine clock-frequency");
}
/* Setup IRQ numbers */
timers.tmr_irq = irq_of_parse_and_map(node, 0);
/* Setup IO addresses */
timers.tmr_regs = of_iomap(node, 0);
kona_timer_disable_and_clear(timers.tmr_regs);
}
static int kona_timer_set_next_event(unsigned long clc, static int kona_timer_set_next_event(unsigned long clc,
struct clock_event_device *unused) struct clock_event_device *unused)
{ {
...@@ -198,7 +173,34 @@ static struct irqaction kona_timer_irq = { ...@@ -198,7 +173,34 @@ static struct irqaction kona_timer_irq = {
static void __init kona_timer_init(struct device_node *node) static void __init kona_timer_init(struct device_node *node)
{ {
kona_timers_init(node); u32 freq;
struct clk *external_clk;
if (!of_device_is_available(node)) {
pr_info("Kona Timer v1 marked as disabled in device tree\n");
return;
}
external_clk = of_clk_get_by_name(node, NULL);
if (!IS_ERR(external_clk)) {
arch_timer_rate = clk_get_rate(external_clk);
clk_prepare_enable(external_clk);
} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
arch_timer_rate = freq;
} else {
pr_err("Kona Timer v1 unable to determine clock-frequency");
return;
}
/* Setup IRQ numbers */
timers.tmr_irq = irq_of_parse_and_map(node, 0);
/* Setup IO addresses */
timers.tmr_regs = of_iomap(node, 0);
kona_timer_disable_and_clear(timers.tmr_regs);
kona_timer_clockevents_init(); kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq); setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL); kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment