Commit ad81e78a authored by Masahiro Yamada's avatar Masahiro Yamada

ARM: dts: uniphier: add STDMAC clock to EHCI nodes

Without the STDMAC clock enabled, the USB 2.0 hosts do not work.
This clock must be explicitly listed in the "clocks" property because
it is independent of the other clocks.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent 2bd6bf03
......@@ -209,7 +209,8 @@ usb0: usb@5a800100 {
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
......@@ -221,7 +222,8 @@ usb1: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
......@@ -233,7 +235,8 @@ usb2: usb@5a820100 {
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
<&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
......
......@@ -241,7 +241,8 @@ usb2: usb@5a800100 {
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
......@@ -253,7 +254,8 @@ usb3: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
......
......@@ -209,7 +209,8 @@ usb0: usb@5a800100 {
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
......@@ -221,7 +222,8 @@ usb1: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
......@@ -233,7 +235,8 @@ usb2: usb@5a820100 {
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
<&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment