Commit ae31cea8 authored by Thomas Gleixner's avatar Thomas Gleixner

x86/ioperm: Simplify first ioperm() invocation logic

On the first allocation of a task the I/O bitmap needs to be
allocated. After the allocation it is installed as an empty bitmap and
immediately afterwards updated.

Avoid that and just do the initial updates (store bitmap pointer, set TIF
flag and make TSS limit valid) in the update path unconditionally. If the
bitmap was already active this is redundant but harmless.

Preparatory change for later optimizations in the context switch code.
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent b800fc4d
......@@ -18,9 +18,10 @@
*/
long ksys_ioperm(unsigned long from, unsigned long num, int turn_on)
{
unsigned int i, max_long, bytes, bytes_updated;
struct thread_struct *t = &current->thread;
struct tss_struct *tss;
unsigned int i, max_long, bytes, bytes_updated;
unsigned long *bitmap;
if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
return -EINVAL;
......@@ -33,59 +34,55 @@ long ksys_ioperm(unsigned long from, unsigned long num, int turn_on)
* IO bitmap up. ioperm() is much less timing critical than clone(),
* this is why we delay this operation until now:
*/
if (!t->io_bitmap_ptr) {
unsigned long *bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
bitmap = t->io_bitmap_ptr;
if (!bitmap) {
bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
if (!bitmap)
return -ENOMEM;
memset(bitmap, 0xff, IO_BITMAP_BYTES);
t->io_bitmap_ptr = bitmap;
set_thread_flag(TIF_IO_BITMAP);
/*
* Now that we have an IO bitmap, we need our TSS limit to be
* correct. It's fine if we are preempted after doing this:
* with TIF_IO_BITMAP set, context switches will keep our TSS
* limit correct.
*/
preempt_disable();
refresh_tss_limit();
preempt_enable();
}
/*
* do it in the per-thread copy and in the TSS ...
*
* Disable preemption via get_cpu() - we must not switch away
* because the ->io_bitmap_max value must match the bitmap
* contents:
* Update the bitmap and the TSS copy with preemption disabled to
* prevent a race against context switch.
*/
tss = &per_cpu(cpu_tss_rw, get_cpu());
preempt_disable();
if (turn_on)
bitmap_clear(t->io_bitmap_ptr, from, num);
bitmap_clear(bitmap, from, num);
else
bitmap_set(t->io_bitmap_ptr, from, num);
bitmap_set(bitmap, from, num);
/*
* Search for a (possibly new) maximum. This is simple and stupid,
* to keep it obviously correct:
*/
max_long = 0;
for (i = 0; i < IO_BITMAP_LONGS; i++)
if (t->io_bitmap_ptr[i] != ~0UL)
for (i = 0; i < IO_BITMAP_LONGS; i++) {
if (bitmap[i] != ~0UL)
max_long = i;
}
bytes = (max_long + 1) * sizeof(unsigned long);
bytes_updated = max(bytes, t->io_bitmap_max);
/* Update the thread data */
t->io_bitmap_max = bytes;
/*
* Store the bitmap pointer (might be the same if the task already
* head one). Set the TIF flag, just in case this is the first
* invocation.
*/
t->io_bitmap_ptr = bitmap;
set_thread_flag(TIF_IO_BITMAP);
/* Update the TSS: */
/* Update the TSS */
tss = this_cpu_ptr(&cpu_tss_rw);
memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated);
/* Make sure the TSS limit covers the I/O bitmap. */
refresh_tss_limit();
put_cpu();
preempt_enable();
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment