mlxsw: spectrum: PTP: Hook into packet receive path
When configured, the Spectrum hardware can recognize PTP packets and trap them to the CPU using dedicated traps, PTP0 and PTP1. One reason to get PTP packets under dedicated traps is to have a separate policer suitable for the amount of PTP traffic expected when switch is operated as a boundary clock. For this, add two new trap groups, MLXSW_REG_HTGT_TRAP_GROUP_SP_PTP0 and _PTP1, and associate the two PTP traps with these two groups. In the driver, specifically for Spectrum-1, event PTP packets will need to be paired up with their timestamps. Those arrive through a different set of traps, added later in the patch set. To support this future use, introduce a new PTP op, ptp_receive. It is possible to configure which PTP messages should be trapped under which PTP trap. On Spectrum systems, we will use PTP0 for event packets (which need timestamping), and PTP1 for control packets (which do not). Thus configure PTP0 trap with a custom callback that defers to the ptp_receive op. Additionally, L2 PTP packets are actually trapped through the LLDP trap, not through any of the PTP traps. So treat the LLDP trap the same way as the PTP0 trap. Unlike PTP traps, which are currently still disabled, LLDP trap is active. Correspondingly, have all the implementations of the ptp_receive op return true, which the handler treats as a signal to forward the packet immediately. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment