Merge tag 'imx-noncritical-fixes-3.10' of...

Merge tag 'imx-noncritical-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/fixes-non-critical

From Shawn Guo:
The imx noncritical fixes for 3.10:

* A bunch of fixes for sparse warings
* One fix for the typo in use of Kconfig symbol
  MACH_EUKREA_CPUIMX27_USEUART4

* tag 'imx-noncritical-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
  ARM: mach-imx: mach-imx6q: Fix sparse warnings
  ARM: mach-imx: src: Include "common.h
  ARM: mach-imx: gpc: Include "common.h"
  ARM: mach-imx: avic: Staticize *avic_base
  ARM: mach-imx: tzic: Staticize *tzic_base
  ARM: mach-imx: clk: Include "clk.h"
  ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops
  ARM: mach-imx: irq-common: Remove imx_irq_set_priority()
  ARM: mach-imx: clk-gate2: Include "clk.h"
  ARM: mach-imx: clk-pllv2: Staticize clk_pllv2_ops
  ARM: mach-imx: clk-pllv1: Staticize clk_pllv1_ops
  ARM: mach-imx: cpu-imx5: Include "common.h"
  ARM: mach-imx: iomux-imx31: Staticize mxc_pin_alloc_map
  ARM: mach-imx: mm-imx3: Staticize imx3_init_l2x0()
  ARM: mach-imx: cpu: Include "common.h"
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-imx/avic.c

@@ -51,7 +51,7 @@
 
 #define AVIC_NUM_IRQS 64
 
-void __iomem *avic_base;
+static void __iomem *avic_base;
 static struct irq_domain *domain;
 
 static u32 avic_saved_mask_reg[2];

arch/arm/mach-imx/clk-busy.c

@@ -147,7 +147,7 @@ static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
 	return ret;
 }
 
-struct clk_ops clk_busy_mux_ops = {
+static struct clk_ops clk_busy_mux_ops = {
 	.get_parent = clk_busy_mux_get_parent,
 	.set_parent = clk_busy_mux_set_parent,
 };

arch/arm/mach-imx/clk-gate2.c

@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include "clk.h"
 
 /**
  * DOC: basic gatable clock which can gate and ungate it's ouput

arch/arm/mach-imx/clk-pllv1.c

@@ -78,7 +78,7 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
 	return ll;
 }
 
-struct clk_ops clk_pllv1_ops = {
+static struct clk_ops clk_pllv1_ops = {
 	.recalc_rate = clk_pllv1_recalc_rate,
 };
 

arch/arm/mach-imx/clk-pllv2.c

@@ -229,7 +229,7 @@ static void clk_pllv2_unprepare(struct clk_hw *hw)
 	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
 }
 
-struct clk_ops clk_pllv2_ops = {
+static struct clk_ops clk_pllv2_ops = {
 	.prepare = clk_pllv2_prepare,
 	.unprepare = clk_pllv2_unprepare,
 	.recalc_rate = clk_pllv2_recalc_rate,

arch/arm/mach-imx/clk.c

 #include <linux/spinlock.h>
+#include "clk.h"
 
 DEFINE_SPINLOCK(imx_ccm_lock);

arch/arm/mach-imx/cpu-imx5.c

@@ -18,6 +18,7 @@
 #include <linux/io.h>
 
 #include "hardware.h"
+#include "common.h"
 
 static int mx5_cpu_rev = -1;
 

arch/arm/mach-imx/cpu.c

@@ -3,6 +3,7 @@
 #include <linux/io.h>
 
 #include "hardware.h"
+#include "common.h"
 
 unsigned int __mxc_cpu_type;
 EXPORT_SYMBOL(__mxc_cpu_type);

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -46,7 +46,7 @@ static const int eukrea_mbimx27_pins[] __initconst = {
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
 	/* UART4 */
-#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	PB26_AF_UART4_RTS,
 	PB28_AF_UART4_TXD,
 	PB29_AF_UART4_CTS,
@@ -306,7 +306,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
 
 	imx27_add_imx_uart1(&uart_pdata);
 	imx27_add_imx_uart2(&uart_pdata);
-#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	imx27_add_imx_uart3(&uart_pdata);
 #endif
 

arch/arm/mach-imx/gpc.c

@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/irqchip/arm-gic.h>
+#include "common.h"
 
 #define GPC_IMR1		0x008
 #define GPC_PGC_CPU_PDN		0x2a0

arch/arm/mach-imx/iomux-imx31.c

@@ -40,7 +40,7 @@ static DEFINE_SPINLOCK(gpio_mux_lock);
 
 #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
 
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
 /*
  * set the mode for a IOMUX pin.
  */

arch/arm/mach-imx/irq-common.c

@@ -21,25 +21,6 @@
 
 #include "irq-common.h"
 
-int imx_irq_set_priority(unsigned char irq, unsigned char prio)
-{
-	struct irq_chip_generic *gc;
-	struct mxc_extra_irq *exirq;
-	int ret;
-
-	ret = -ENOSYS;
-
-	gc = irq_get_chip_data(irq);
-	if (gc && gc->private) {
-		exirq = gc->private;
-		if (exirq->set_priority)
-			ret = exirq->set_priority(irq, prio);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(imx_irq_set_priority);
-
 int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 {
 	struct irq_chip_generic *gc;

arch/arm/mach-imx/mach-cpuimx27.c

@@ -48,7 +48,7 @@ static const int eukrea_cpuimx27_pins[] __initconst = {
 	PE14_PF_UART1_CTS,
 	PE15_PF_UART1_RTS,
 	/* UART4 */
-#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	PB26_AF_UART4_RTS,
 	PB28_AF_UART4_TXD,
 	PB29_AF_UART4_CTS,
@@ -272,7 +272,7 @@ static void __init eukrea_cpuimx27_init(void)
 	/* SDHC2 can be used for Wifi */
 	imx27_add_mxc_mmc(1, NULL);
 #endif
-#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	/* in which case UART4 is also used for Bluetooth */
 	imx27_add_imx_uart3(&uart_pdata);
 #endif

arch/arm/mach-imx/mach-imx6q.c

@@ -73,7 +73,7 @@ static int imx6q_revision(void)
 	}
 }
 
-void imx6q_restart(char mode, const char *cmd)
+static void imx6q_restart(char mode, const char *cmd)
 {
 	struct device_node *np;
 	void __iomem *wdog_base;
@@ -256,7 +256,7 @@ static void __init imx6q_opp_init(struct device *cpu_dev)
 	of_node_put(np);
 }
 
-struct platform_device imx6q_cpufreq_pdev = {
+static struct platform_device imx6q_cpufreq_pdev = {
 	.name = "imx6q-cpufreq",
 };
 

arch/arm/mach-imx/mm-imx3.c

@@ -82,7 +82,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
 	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
 }
 
-void __init imx3_init_l2x0(void)
+static void __init imx3_init_l2x0(void)
 {
 #ifdef CONFIG_CACHE_L2X0
 	void __iomem *l2x0_base;

arch/arm/mach-imx/src.c

@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <asm/smp_plat.h>
+#include "common.h"
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020

arch/arm/mach-imx/tzic.c

@@ -49,7 +49,7 @@
 #define TZIC_SWINT	0x0F00	/* Software Interrupt Rigger Register */
 #define TZIC_ID0	0x0FD0	/* Indentification Register 0 */
 
-void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+static void __iomem *tzic_base;
 static struct irq_domain *domain;
 
 #define TZIC_NUM_IRQS 128