Skip to content

L
linux
Commit af67384f authored by Ricardo Ribalda Delgado's avatar Ricardo Ribalda Delgado Committed by Bryan Wu
Browse files
Options

leds-pca9633: Add support for PCA9634 

Add support for PCA9634 chip, which belongs to the same family as the
9633 but with support for 8 outputs instead of 4.
Signed-off-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: default avatarBryan Wu <cooloney@gmail.com>
parent daa124b1
Hide whitespace changes
Inline Side-by-side
Showing with 85 additions and 41 deletions
Documentation/devicetree/bindings/leds/pca9633.txt
View file @ af67384f
LEDs connected to pca9633 or pca9632
LEDs connected to pca9632, pca9633 or pca9634
Required properties:
- compatible : should be : "nxp,pca963x"
- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634"
Optional properties:
- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain
- nxp,hw-blink : use hardware blinking instead of software blinking
Each led is represented as a sub-node of the nxp,pca9633 device.
Each led is represented as a sub-node of the nxp,pca963x device.
LED sub-node properties:
- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
- reg : number of LED line (could be from 0 to 4)
- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633
or 0 to 7 in pca9634)
- linux,default-trigger : (optional)
see Documentation/devicetree/bindings/leds/common.txt
Examples:
pca9632: pca9632 {
compatible = "nxp,pca9632", "nxp,pca963x";
compatible = "nxp,pca9632";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x62>;
......
drivers/leds/Kconfig
View file @ af67384f
......@@ -292,12 +292,13 @@ config LEDS_PCA955X
devices include PCA9550, PCA9551, PCA9552, and PCA9553.
config LEDS_PCA9633
tristate "LED support for PCA9633 I2C chip"
tristate "LED support for PCA963x I2C chip"
depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to the PCA9633
LED driver chip accessed via the I2C bus.
This option enables support for LEDs connected to the PCA963x
LED driver chip accessed via the I2C bus. Supported
devices include PCA9633 and PCA9634
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
......
drivers/leds/leds-pca9633.c
View file @ af67384f
/*
* Copyright 2011 bct electronic GmbH
* Copyright 2013 Qtechnology/AS
*
* Author: Peter Meerwald <p.meerwald@bct-electronic.com>
* Author: Ricardo Ribalda <ricardo.ribalda@gmail.com>
*
* Based on leds-pca955x.c
*
......@@ -10,6 +12,7 @@
* directory of this archive for more details.
*
* LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
* LED driver for the PCA9634 I2C LED driver (7-bit slave address set by hw.)
*
* Note that hardware blinking violates the leds infrastructure driver
* interface since the hardware only supports blinking all LEDs with the
......@@ -45,16 +48,42 @@
#define PCA9633_MODE1 0x00
#define PCA9633_MODE2 0x01
#define PCA9633_PWM_BASE 0x02
#define PCA9633_GRPPWM 0x06
#define PCA9633_GRPFREQ 0x07
#define PCA9633_LEDOUT 0x08
enum pca9633_type {
pca9633,
pca9634,
};
struct pca9633_chipdef {
u8 grppwm;
u8 grpfreq;
u8 ledout_base;
int n_leds;
};
static struct pca9633_chipdef pca9633_chipdefs[] = {
[pca9633] = {
.grppwm = 0x6,
.grpfreq = 0x7,
.ledout_base = 0x8,
.n_leds = 4,
},
[pca9634] = {
.grppwm = 0xa,
.grpfreq = 0xb,
.ledout_base = 0xc,
.n_leds = 8,
},
};
/* Total blink period in milliseconds */
#define PCA9632_BLINK_PERIOD_MIN 42
#define PCA9632_BLINK_PERIOD_MAX 10667
static const struct i2c_device_id pca9633_id[] = {
{ "pca9633", 0 },
{ "pca9632", pca9633 },
{ "pca9633", pca9633 },
{ "pca9634", pca9634 },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca9633_id);
......@@ -66,10 +95,11 @@ enum pca9633_cmd {
struct pca9633_led {
struct i2c_client *client;
struct pca9633_chipdef *chipdef;
struct work_struct work;
enum led_brightness brightness;
struct led_classdev led_cdev;
int led_num; /* 0 .. 3 potentially */
int led_num; /* 0 .. 7 potentially */
enum pca9633_cmd cmd;
char name[32];
u8 gdc;
......@@ -78,24 +108,26 @@ struct pca9633_led {
static void pca9633_brightness_work(struct pca9633_led *pca9633)
{
u8 ledout = i2c_smbus_read_byte_data(pca9633->client, PCA9633_LEDOUT);
int shift = 2 * pca9633->led_num;
u8 ledout_addr = pca9633->chipdef->ledout_base + (pca9633->led_num / 4);
u8 ledout;
int shift = 2 * (pca9633->led_num % 4);
u8 mask = 0x3 << shift;
ledout = i2c_smbus_read_byte_data(pca9633->client, ledout_addr);
switch (pca9633->brightness) {
case LED_FULL:
i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
(ledout & ~mask) | (PCA9633_LED_ON << shift));
break;
case LED_OFF:
i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
ledout & ~mask);
break;
default:
i2c_smbus_write_byte_data(pca9633->client,
PCA9633_PWM_BASE + pca9633->led_num,
pca9633->brightness);
i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
(ledout & ~mask) | (PCA9633_LED_PWM << shift));
break;
}
......@@ -103,15 +135,16 @@ static void pca9633_brightness_work(struct pca9633_led *pca9633)
static void pca9633_blink_work(struct pca9633_led *pca9633)
{
u8 ledout = i2c_smbus_read_byte_data(pca9633->client, PCA9633_LEDOUT);
u8 ledout_addr = pca9633->chipdef->ledout_base + (pca9633->led_num / 4);
u8 ledout = i2c_smbus_read_byte_data(pca9633->client, ledout_addr);
u8 mode2 = i2c_smbus_read_byte_data(pca9633->client, PCA9633_MODE2);
int shift = 2 * pca9633->led_num;
int shift = 2 * (pca9633->led_num % 4);
u8 mask = 0x3 << shift;
i2c_smbus_write_byte_data(pca9633->client, PCA9633_GRPPWM,
i2c_smbus_write_byte_data(pca9633->client, pca9633->chipdef->grppwm,
pca9633->gdc);
i2c_smbus_write_byte_data(pca9633->client, PCA9633_GRPFREQ,
i2c_smbus_write_byte_data(pca9633->client, pca9633->chipdef->grpfreq,
pca9633->gfrq);
if (!(mode2 & PCA9633_MODE2_DMBLNK))
......@@ -119,7 +152,7 @@ static void pca9633_blink_work(struct pca9633_led *pca9633)
mode2 | PCA9633_MODE2_DMBLNK);
if ((ledout & mask) != (PCA9633_LED_GRP_PWM << shift))
i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
(ledout & ~mask) | (PCA9633_LED_GRP_PWM << shift));
}
......@@ -215,7 +248,7 @@ static int pca9633_blink_set(struct led_classdev *led_cdev,
#if IS_ENABLED(CONFIG_OF)
static struct pca9633_platform_data *
pca9633_dt_init(struct i2c_client *client)
pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip)
{
struct device_node *np = client->dev.of_node, *child;
struct pca9633_platform_data *pdata;
......@@ -223,11 +256,11 @@ pca9633_dt_init(struct i2c_client *client)
int count;
count = of_get_child_count(np);
if (!count || count > 4)
if (!count || count > chip->n_leds)
return ERR_PTR(-ENODEV);
pca9633_leds = devm_kzalloc(&client->dev,
sizeof(struct led_info) * count, GFP_KERNEL);
sizeof(struct led_info) * chip->n_leds, GFP_KERNEL);
if (!pca9633_leds)
return ERR_PTR(-ENOMEM);
......@@ -269,12 +302,14 @@ pca9633_dt_init(struct i2c_client *client)
}
static const struct of_device_id of_pca9633_match[] = {
{ .compatible = "nxp,pca963x", },
{ .compatible = "nxp,pca9632", },
{ .compatible = "nxp,pca9633", },
{ .compatible = "nxp,pca9634", },
{},
};
#else
static struct pca9633_platform_data *
pca9633_dt_init(struct i2c_client *client)
pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip)
{
return ERR_PTR(-ENODEV);
}
......@@ -285,34 +320,38 @@ static int pca9633_probe(struct i2c_client *client,
{
struct pca9633_led *pca9633;
struct pca9633_platform_data *pdata;
struct pca9633_chipdef *chip;
int i, err;
chip = &pca9633_chipdefs[id->driver_data];
pdata = dev_get_platdata(&client->dev);
if (!pdata) {
pdata = pca9633_dt_init(client);
pdata = pca9633_dt_init(client, chip);
if (IS_ERR(pdata)) {
dev_warn(&client->dev, "could not parse configuration\n");
pdata = NULL;
}
}
if (pdata) {
if (pdata->leds.num_leds <= 0 || pdata->leds.num_leds > 4) {
dev_err(&client->dev, "board info must claim at most 4 LEDs");
return -EINVAL;
}
if (pdata && (pdata->leds.num_leds < 1 ||
pdata->leds.num_leds > chip->n_leds)) {
dev_err(&client->dev, "board info must claim 1-%d LEDs",
chip->n_leds);
return -EINVAL;
}
pca9633 = devm_kzalloc(&client->dev, 4 * sizeof(*pca9633), GFP_KERNEL);
pca9633 = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca9633),
GFP_KERNEL);
if (!pca9633)
return -ENOMEM;
i2c_set_clientdata(client, pca9633);
for (i = 0; i < 4; i++) {
for (i = 0; i < chip->n_leds; i++) {
pca9633[i].client = client;
pca9633[i].led_num = i;
pca9633[i].chipdef = chip;
/* Platform data can specify LED names and default triggers */
if (pdata && i < pdata->leds.num_leds) {
......@@ -349,7 +388,9 @@ static int pca9633_probe(struct i2c_client *client,
i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01);
/* Turn off LEDs */
i2c_smbus_write_byte_data(client, PCA9633_LEDOUT, 0x00);
i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00);
if (chip->n_leds > 4)
i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00);
return 0;
......@@ -367,10 +408,11 @@ static int pca9633_remove(struct i2c_client *client)
struct pca9633_led *pca9633 = i2c_get_clientdata(client);
int i;
for (i = 0; i < 4; i++) {
led_classdev_unregister(&pca9633[i].led_cdev);
cancel_work_sync(&pca9633[i].work);
}
for (i = 0; i < pca9633->chipdef->n_leds; i++)
if (pca9633[i].client != NULL) {
led_classdev_unregister(&pca9633[i].led_cdev);
cancel_work_sync(&pca9633[i].work);
}
return 0;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7