Commit af6cb95c authored by Jitao Shi's avatar Jitao Shi Committed by Sam Ravnborg

dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings

Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na",
"boe,tv101wum-n53" and "auo,b101uan08.3" panels.
Signed-off-by: default avatarJitao Shi <jitao.shi@mediatek.com>
Reviewed-by: default avatarSam Ravnborg <sam@ravnborg.org>
[dropped Rob from list of maintainers - verified on irc]
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-2-jitao.shi@mediatek.com
parent 5e791166
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: BOE TV101WUM-NL6 DSI Display Panel
maintainers:
- Thierry Reding <thierry.reding@gmail.com>
- Sam Ravnborg <sam@ravnborg.org>
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
enum:
# BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
- boe,tv101wum-nl6
# AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
- auo,kd101n80-45na
# BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
- boe,tv101wum-n53
# AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
- auo,b101uan08.3
reg:
description: the virtual channel number of a DSI peripheral
enable-gpios:
description: a GPIO spec for the enable pin
pp1800-supply:
description: core voltage supply
avdd-supply:
description: phandle of the regulator that provides positive voltage
avee-supply:
description: phandle of the regulator that provides negative voltage
backlight:
description: phandle of the backlight device attached to the panel
port: true
required:
- compatible
- reg
- enable-gpios
- pp1800-supply
- avdd-supply
- avee-supply
additionalProperties: false
examples:
- |
dsi {
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
compatible = "boe,tv101wum-nl6";
reg = <0>;
enable-gpios = <&pio 45 0>;
avdd-supply = <&ppvarn_lcd>;
avee-supply = <&ppvarp_lcd>;
pp1800-supply = <&pp1800_lcd>;
backlight = <&backlight_lcd0>;
status = "okay";
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment