Commit afda08c4 authored by Peter Rosin's avatar Peter Rosin Committed by Greg Kroah-Hartman

mux: adg792a: add mux controller driver for ADG792A/G

Analog Devices ADG792A/G is a triple 4:1 mux.
Reviewed-by: default avatarJonathan Cameron <jic23@kernel.org>
Signed-off-by: default avatarPeter Rosin <peda@axentia.se>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f6689802
......@@ -17,6 +17,18 @@ menuconfig MULTIPLEXER
if MULTIPLEXER
config MUX_ADG792A
tristate "Analog Devices ADG792A/ADG792G Multiplexers"
depends on I2C || COMPILE_TEST
help
ADG792A and ADG792G Wide Bandwidth Triple 4:1 Multiplexers
The driver supports both operating the three multiplexers in
parallel and operating them independently.
To compile the driver as a module, choose M here: the module will
be called mux-adg792a.
config MUX_GPIO
tristate "GPIO-controlled Multiplexer"
depends on GPIOLIB || COMPILE_TEST
......
......@@ -3,4 +3,5 @@
#
obj-$(CONFIG_MULTIPLEXER) += mux-core.o
obj-$(CONFIG_MUX_ADG792A) += mux-adg792a.o
obj-$(CONFIG_MUX_GPIO) += mux-gpio.o
/*
* Multiplexer driver for Analog Devices ADG792A/G Triple 4:1 mux
*
* Copyright (C) 2017 Axentia Technologies AB
*
* Author: Peter Rosin <peda@axentia.se>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mux/driver.h>
#include <linux/property.h>
#define ADG792A_LDSW BIT(0)
#define ADG792A_RESETB BIT(1)
#define ADG792A_DISABLE(mux) (0x50 | (mux))
#define ADG792A_DISABLE_ALL (0x5f)
#define ADG792A_MUX(mux, state) (0xc0 | (((mux) + 1) << 2) | (state))
#define ADG792A_MUX_ALL(state) (0xc0 | (state))
static int adg792a_write_cmd(struct i2c_client *i2c, u8 cmd, int reset)
{
u8 data = ADG792A_RESETB | ADG792A_LDSW;
/* ADG792A_RESETB is active low, the chip resets when it is zero. */
if (reset)
data &= ~ADG792A_RESETB;
return i2c_smbus_write_byte_data(i2c, cmd, data);
}
static int adg792a_set(struct mux_control *mux, int state)
{
struct i2c_client *i2c = to_i2c_client(mux->chip->dev.parent);
u8 cmd;
if (mux->chip->controllers == 1) {
/* parallel mux controller operation */
if (state == MUX_IDLE_DISCONNECT)
cmd = ADG792A_DISABLE_ALL;
else
cmd = ADG792A_MUX_ALL(state);
} else {
unsigned int controller = mux_control_get_index(mux);
if (state == MUX_IDLE_DISCONNECT)
cmd = ADG792A_DISABLE(controller);
else
cmd = ADG792A_MUX(controller, state);
}
return adg792a_write_cmd(i2c, cmd, 0);
}
static const struct mux_control_ops adg792a_ops = {
.set = adg792a_set,
};
static int adg792a_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct device *dev = &i2c->dev;
struct mux_chip *mux_chip;
s32 idle_state[3];
u32 cells;
int ret;
int i;
if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
ret = device_property_read_u32(dev, "#mux-control-cells", &cells);
if (ret < 0)
return ret;
if (cells >= 2)
return -EINVAL;
mux_chip = devm_mux_chip_alloc(dev, cells ? 3 : 1, 0);
if (IS_ERR(mux_chip))
return PTR_ERR(mux_chip);
mux_chip->ops = &adg792a_ops;
ret = adg792a_write_cmd(i2c, ADG792A_DISABLE_ALL, 1);
if (ret < 0)
return ret;
ret = device_property_read_u32_array(dev, "idle-state",
(u32 *)idle_state,
mux_chip->controllers);
if (ret < 0) {
idle_state[0] = MUX_IDLE_AS_IS;
idle_state[1] = MUX_IDLE_AS_IS;
idle_state[2] = MUX_IDLE_AS_IS;
}
for (i = 0; i < mux_chip->controllers; ++i) {
struct mux_control *mux = &mux_chip->mux[i];
mux->states = 4;
switch (idle_state[i]) {
case MUX_IDLE_DISCONNECT:
case MUX_IDLE_AS_IS:
case 0 ... 4:
mux->idle_state = idle_state[i];
break;
default:
dev_err(dev, "invalid idle-state %d\n", idle_state[i]);
return -EINVAL;
}
}
ret = devm_mux_chip_register(dev, mux_chip);
if (ret < 0)
return ret;
if (cells)
dev_info(dev, "3x single pole quadruple throw muxes registered\n");
else
dev_info(dev, "triple pole quadruple throw mux registered\n");
return 0;
}
static const struct i2c_device_id adg792a_id[] = {
{ .name = "adg792a", },
{ .name = "adg792g", },
{ }
};
MODULE_DEVICE_TABLE(i2c, adg792a_id);
static const struct of_device_id adg792a_of_match[] = {
{ .compatible = "adi,adg792a", },
{ .compatible = "adi,adg792g", },
{ }
};
MODULE_DEVICE_TABLE(of, adg792a_of_match);
static struct i2c_driver adg792a_driver = {
.driver = {
.name = "adg792a",
.of_match_table = of_match_ptr(adg792a_of_match),
},
.probe = adg792a_probe,
.id_table = adg792a_id,
};
module_i2c_driver(adg792a_driver);
MODULE_DESCRIPTION("Analog Devices ADG792A/G Triple 4:1 mux driver");
MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment