Commit aff55ff2 authored by Jean Tourrilhes's avatar Jean Tourrilhes Committed by Linus Torvalds

[IRDA]: Kconfig changes to enable new drivers into the build, from Martin Diehl.

parent e12fdce2
No related merge requests found
...@@ -65,6 +65,75 @@ config TEKRAM_DONGLE ...@@ -65,6 +65,75 @@ config TEKRAM_DONGLE
dongles you will have to start irattach like this: dongles you will have to start irattach like this:
"irattach -d tekram". "irattach -d tekram".
config LITELINK_DONGLE
tristate "Parallax LiteLink dongle"
depends on DONGLE && IRDA
help
Say Y here if you want to build support for the Parallax Litelink
dongle. To compile it as a module, choose M here. The Parallax
dongle attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for Parallax
dongles you will have to start irattach like this:
"irattach -d litelink".
config MA600_DONGLE
tristate "Mobile Action MA600 dongle"
depends on DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Mobile Action MA600
dongle. To compile it as a module, choose M here. The MA600 dongle
attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. The driver should also support
the MA620 USB version of the dongle, if the integrated USB-to-RS232
converter is supported by usbserial. To activate support for
MA600 dongle you will have to start irattach like this:
"irattach -d ma600".
config GIRBIL_DONGLE
tristate "Greenwich GIrBIL dongle"
depends on DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Greenwich GIrBIL
dongle. If you want to compile it as a module, choose M here.
The Greenwich dongle attaches to the normal 9-pin serial port
connector, and can currently only be used by IrTTY. To activate
support for Greenwich dongles you will have to start irattach
like this: "irattach -d girbil".
config MCP2120_DONGLE
tristate "Microchip MCP2120"
depends on DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Microchip MCP2120
dongle. If you want to compile it as a module, choose M here.
The MCP2120 dongle attaches to the normal 9-pin serial port
connector, and can currently only be used by IrTTY. To activate
support for MCP2120 dongles you will have to start irattach
like this: "irattach -d mcp2120".
You must build this dongle yourself. For more information see:
<http://www.eyetap.org/~tangf/irda_sir_linux.html>
config OLD_BELKIN_DONGLE
tristate "Old Belkin dongle"
depends on DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
M here. Some information is contained in the comments
at the top of <file:drivers/net/irda/old_belkin.c>.
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"
depends on DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the ACTiSYS IR-200L
dongle. If you want to compile it as a module, choose M here.
The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
port connector, and can currently only be used by IrTTY.
To activate support for ACTiSYS IR-200L dongle you will have to
start irattach like this: "irattach -d act200l".
comment "Old SIR device drivers" comment "Old SIR device drivers"
config IRPORT_SIR config IRPORT_SIR
...@@ -130,7 +199,7 @@ config TEKRAM_DONGLE_OLD ...@@ -130,7 +199,7 @@ config TEKRAM_DONGLE_OLD
dongles you will have to start irattach like this: dongles you will have to start irattach like this:
"irattach -d tekram". "irattach -d tekram".
config GIRBIL_DONGLE config GIRBIL_DONGLE_OLD
tristate "Greenwich GIrBIL dongle" tristate "Greenwich GIrBIL dongle"
depends on DONGLE_OLD && IRDA depends on DONGLE_OLD && IRDA
help help
...@@ -141,7 +210,7 @@ config GIRBIL_DONGLE ...@@ -141,7 +210,7 @@ config GIRBIL_DONGLE
dongles you will have to insert "irattach -d girbil" in the dongles you will have to insert "irattach -d girbil" in the
/etc/irda/drivers script. /etc/irda/drivers script.
config LITELINK_DONGLE config LITELINK_DONGLE_OLD
tristate "Parallax LiteLink dongle" tristate "Parallax LiteLink dongle"
depends on DONGLE_OLD && IRDA depends on DONGLE_OLD && IRDA
help help
...@@ -152,7 +221,7 @@ config LITELINK_DONGLE ...@@ -152,7 +221,7 @@ config LITELINK_DONGLE
dongles you will have to start irattach like this: dongles you will have to start irattach like this:
"irattach -d litelink". "irattach -d litelink".
config MCP2120_DONGLE config MCP2120_DONGLE_OLD
tristate "Microchip MCP2120" tristate "Microchip MCP2120"
depends on DONGLE_OLD && IRDA depends on DONGLE_OLD && IRDA
help help
...@@ -166,7 +235,7 @@ config MCP2120_DONGLE ...@@ -166,7 +235,7 @@ config MCP2120_DONGLE
You must build this dongle yourself. For more information see: You must build this dongle yourself. For more information see:
<http://www.eyetap.org/~tangf/irda_sir_linux.html> <http://www.eyetap.org/~tangf/irda_sir_linux.html>
config OLD_BELKIN_DONGLE config OLD_BELKIN_DONGLE_OLD
tristate "Old Belkin dongle" tristate "Old Belkin dongle"
depends on DONGLE_OLD && IRDA depends on DONGLE_OLD && IRDA
help help
...@@ -175,11 +244,7 @@ config OLD_BELKIN_DONGLE ...@@ -175,11 +244,7 @@ config OLD_BELKIN_DONGLE
will be called old_belkin. Some information is contained in the will be called old_belkin. Some information is contained in the
comments at the top of <file:drivers/net/irda/old_belkin.c>. comments at the top of <file:drivers/net/irda/old_belkin.c>.
config EP7211_IR config ACT200L_DONGLE_OLD
tristate "EP7211 I/R support"
depends on DONGLE_OLD && ARCH_EP7211 && IRDA
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)" tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
depends on DONGLE_OLD && EXPERIMENTAL && IRDA depends on DONGLE_OLD && EXPERIMENTAL && IRDA
help help
...@@ -190,7 +255,7 @@ config ACT200L_DONGLE ...@@ -190,7 +255,7 @@ config ACT200L_DONGLE
ACTiSYS IR-200L dongles you will have to start irattach like this: ACTiSYS IR-200L dongles you will have to start irattach like this:
"irattach -d act200l". "irattach -d act200l".
config MA600_DONGLE config MA600_DONGLE_OLD
tristate "Mobile Action MA600 dongle (EXPERIMENTAL)" tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
depends on DONGLE_OLD && EXPERIMENTAL && IRDA depends on DONGLE_OLD && EXPERIMENTAL && IRDA
---help--- ---help---
...@@ -206,6 +271,10 @@ config MA600_DONGLE ...@@ -206,6 +271,10 @@ config MA600_DONGLE
There is a pre-compiled module on There is a pre-compiled module on
<http://engsvr.ust.hk/~eetwl95/download/ma600-2.4.x.tar.gz> <http://engsvr.ust.hk/~eetwl95/download/ma600-2.4.x.tar.gz>
config EP7211_IR
tristate "EP7211 I/R support"
depends on DONGLE_OLD && ARCH_EP7211 && IRDA
comment "FIR device drivers" comment "FIR device drivers"
config USB_IRDA config USB_IRDA
......
...@@ -21,20 +21,26 @@ obj-$(CONFIG_VIA_FIR) += via-ircc.o ...@@ -21,20 +21,26 @@ obj-$(CONFIG_VIA_FIR) += via-ircc.o
obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o
obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o
obj-$(CONFIG_ACTISYS_DONGLE_OLD) += actisys.o obj-$(CONFIG_ACTISYS_DONGLE_OLD) += actisys.o
obj-$(CONFIG_GIRBIL_DONGLE) += girbil.o obj-$(CONFIG_GIRBIL_DONGLE_OLD) += girbil.o
obj-$(CONFIG_LITELINK_DONGLE) += litelink.o obj-$(CONFIG_LITELINK_DONGLE_OLD) += litelink.o
obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin.o obj-$(CONFIG_OLD_BELKIN_DONGLE_OLD) += old_belkin.o
obj-$(CONFIG_MCP2120_DONGLE_OLD) += mcp2120.o
obj-$(CONFIG_ACT200L_DONGLE_OLD) += act200l.o
obj-$(CONFIG_MA600_DONGLE_OLD) += ma600.o
obj-$(CONFIG_EP7211_IR) += ep7211_ir.o obj-$(CONFIG_EP7211_IR) += ep7211_ir.o
obj-$(CONFIG_MCP2120_DONGLE) += mcp2120.o
obj-$(CONFIG_AU1000_FIR) += au1k_ir.o obj-$(CONFIG_AU1000_FIR) += au1k_ir.o
obj-$(CONFIG_ACT200L_DONGLE) += act200l.o
obj-$(CONFIG_MA600_DONGLE) += ma600.o
# New SIR drivers # New SIR drivers
obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o
# New dongles drivers for new SIR drivers # New dongles drivers for new SIR drivers
obj-$(CONFIG_ESI_DONGLE) += esi-sir.o obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o
obj-$(CONFIG_ACTISYS_DONGLE) += actisys-sir.o obj-$(CONFIG_ACTISYS_DONGLE) += actisys-sir.o
obj-$(CONFIG_LITELINK_DONGLE) += litelink-sir.o
obj-$(CONFIG_GIRBIL_DONGLE) += girbil-sir.o
obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin-sir.o
obj-$(CONFIG_MCP2120_DONGLE) += mcp2120-sir.o
obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o
obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o
# The SIR helper module # The SIR helper module
sir-dev-objs := sir_core.o sir_dev.o sir_dongle.o sir_kthread.o sir-dev-objs := sir_core.o sir_dev.o sir_dongle.o sir_kthread.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment