drm/i915/dsi: rename intel_dsi_exec_vbt_sequence to intel_dsi_vbt_exec_sequence

Use the prefix intel_dsi_vbt for all the DSI VBT functions. No
functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/0a05abca364f3bc7f9caf90c9bd3a68eef5f222f.1488810382.git.jani.nikula@intel.com

drivers/gpu/drm/i915/intel_dsi.c

@@ -806,38 +806,38 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
 	/* Power on, try both CRC pmic gpio and VBT */
 	if (intel_dsi->gpio_panel)
 		gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
+	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
 	intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay);
 
 	/* Deassert reset */
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
+	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
 
 	/* Put device in ready state (LP-11) */
 	intel_dsi_device_ready(encoder);
 
 	/* Send initialization commands in LP mode */
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
+	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
 
 	/* Enable port in pre-enable phase itself because as per hw team
 	 * recommendation, port should be enabled befor plane & pipe */
 	if (is_cmd_mode(intel_dsi)) {
 		for_each_dsi_port(port, intel_dsi->ports)
 			I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(port), 8 * 4);
-		intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_TEAR_ON);
-		intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
+		intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_ON);
+		intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
 	} else {
 		msleep(20); /* XXX */
 		for_each_dsi_port(port, intel_dsi->ports)
 			dpi_send_cmd(intel_dsi, TURN_ON, false, port);
 		intel_dsi_msleep(intel_dsi, 100);
 
-		intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
+		intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
 
 		intel_dsi_port_enable(encoder);
 	}
 
 	intel_panel_enable_backlight(intel_dsi->attached_connector);
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_ON);
+	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_ON);
 }
 
 static void intel_dsi_enable_nop(struct intel_encoder *encoder,
@@ -863,7 +863,7 @@ static void intel_dsi_pre_disable(struct intel_encoder *encoder,
 
 	DRM_DEBUG_KMS("\n");
 
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
+	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
 	intel_panel_disable_backlight(intel_dsi->attached_connector);
 
 	/*
@@ -925,8 +925,8 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder,
 	 * some next enable sequence send turn on packet error is observed
 	 */
 	if (is_cmd_mode(intel_dsi))
-		intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_TEAR_OFF);
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_DISPLAY_OFF);
+		intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_OFF);
+	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_OFF);
 
 	/* Transition to LP-00 */
 	intel_dsi_clear_device_ready(encoder);
@@ -953,11 +953,11 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder,
 	}
 
 	/* Assert reset */
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
+	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
 
 	/* Power off, try both CRC pmic gpio and VBT */
 	intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay);
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
+	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
 	if (intel_dsi->gpio_panel)
 		gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
 

drivers/gpu/drm/i915/intel_dsi.h

@@ -131,9 +131,6 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)
 
 void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi, enum port port);
 
-void intel_dsi_exec_vbt_sequence(struct intel_dsi *intel_dsi,
-				 enum mipi_seq seq_id);
-
 bool intel_dsi_pll_is_enabled(struct drm_i915_private *dev_priv);
 int intel_compute_dsi_pll(struct intel_encoder *encoder,
 			  struct intel_crtc_state *config);
@@ -147,6 +144,8 @@ void intel_dsi_reset_clocks(struct intel_encoder *encoder,
 
 bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id);
 int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi);
+void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
+				 enum mipi_seq seq_id);
 enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt);
 
 #endif /* _INTEL_DSI_H */

drivers/gpu/drm/i915/intel_dsi_panel_vbt.c

@@ -415,7 +415,7 @@ static const char *sequence_name(enum mipi_seq seq_id)
 		return "(unknown)";
 }
 
-void intel_dsi_exec_vbt_sequence(struct intel_dsi *intel_dsi,
+void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
 				 enum mipi_seq seq_id)
 {
 	struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);