Commit b130d5c2 authored by Kukjin Kim's avatar Kukjin Kim

ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX

This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung
S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443,
and S3C2450 SoCs so that we can merge the mach-xxx directories
and plat-s3c24xx dir. to just one mach-s3c24xx for them.

I think this should be sent to upstream via samsung tree because
this touches many samsung stuff.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
[for the gadget part:]
Acked-by: default avatarFelipe Balbi <balbi@ti.com>
[for the framebuffer (video) part:]
Acked-by: default avatarFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
[For the watchdog-part:]
Acked-by: default avatarWim Van Sebroeck <wim@iguana.be>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 507164d2
......@@ -763,22 +763,21 @@ config ARCH_SA1100
help
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select CLKDEV_LOOKUP
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
Note, the S3C2416 and the S3C2450 are so close that they even share
the same SoC ID code. This means that there is no separate machine
directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
(<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
Samsung SMDK2410 development board (and derivatives).
config ARCH_S3C64XX
bool "Samsung S3C64XX"
......@@ -1068,7 +1067,7 @@ source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
if ARCH_S3C2410
if ARCH_S3C24XX
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2416/Kconfig"
......@@ -1590,7 +1589,7 @@ source kernel/Kconfig.preempt
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
ARCH_S5PV210 || ARCH_EXYNOS4
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
......@@ -2116,7 +2115,7 @@ config CPU_FREQ_S3C
config CPU_FREQ_S3C24XX
bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
select CPU_FREQ_S3C
help
This enables the CPUfreq driver for the Samsung S3C24XX family
......
......@@ -175,7 +175,7 @@ machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24XX) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
......
......@@ -58,7 +58,7 @@
add \rb, \rb, #0x00010000 @ Ser1
#endif
.endm
#elif defined(CONFIG_ARCH_S3C2410)
#elif defined(CONFIG_ARCH_S3C24XX)
.macro loadsp, rb, tmp
mov \rb, #0x50000000
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
......
......@@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_ARCH_S3C2410=y
CONFIG_ARCH_S3C24XX=y
CONFIG_S3C_ADC=y
CONFIG_S3C24XX_PWM=y
CONFIG_MACH_MINI2440=y
......
......@@ -9,7 +9,7 @@ CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S3C2410=y
CONFIG_ARCH_S3C24XX=y
CONFIG_S3C_BOOT_ERROR_RESET=y
CONFIG_S3C_ADC=y
CONFIG_S3C24XX_PWM=y
......
......@@ -14,7 +14,7 @@ CONFIG_SLOB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S3C2410=y
CONFIG_ARCH_S3C24XX=y
CONFIG_MACH_TCT_HAMMER=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
......
......@@ -4,7 +4,7 @@
config CPU_S3C2410
bool
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
select CPU_ARM920T
select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
......
......@@ -4,7 +4,7 @@
config CPU_S3C2412
bool
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
......@@ -14,7 +14,7 @@ config CPU_S3C2412
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2410 && \
depends on ARCH_S3C24XX && !CPU_S3C2410 && \
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412
......
......@@ -9,7 +9,7 @@
config CPU_S3C2416
bool
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
select CPU_ARM926T
select S3C2416_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
......
......@@ -4,7 +4,7 @@
config CPU_S3C2443
bool
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
select CPU_ARM920T
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
......
......@@ -4,7 +4,7 @@
config PLAT_S3C24XX
bool
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
......@@ -84,7 +84,7 @@ config PM_SIMTEC
config S3C2410_DMA
bool "S3C2410 DMA support"
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
......@@ -93,7 +93,7 @@ config S3C2410_DMA
config S3C2410_DMA_DEBUG
bool "S3C2410 DMA support debug"
depends on ARCH_S3C2410 && S3C2410_DMA
depends on ARCH_S3C24XX && S3C2410_DMA
help
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
......
......@@ -35,7 +35,7 @@ obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
# device specific setup and/or initialisation
obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o
# machine common support
......
......@@ -205,7 +205,7 @@ config S3C_DEV_USB_HSOTG
config S3C_DEV_WDT
bool
default y if ARCH_S3C2410
default y if ARCH_S3C24XX
help
Complie in platform device definition for Watchdog Timer
......@@ -264,7 +264,7 @@ config SAMSUNG_DEV_KEYPAD
config SAMSUNG_DEV_PWM
bool
default y if ARCH_S3C2410
default y if ARCH_S3C24XX
help
Compile in platform device definition for PWM Timer
......
......@@ -215,7 +215,7 @@ config TOUCHSCREEN_FUJITSU
config TOUCHSCREEN_S3C2410
tristate "Samsung S3C2410/generic touchscreen input driver"
depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
select S3C_ADC
help
Say Y here if you have the s3c2410 touchscreen.
......
......@@ -69,7 +69,7 @@ config LEDS_MIKROTIK_RB532
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
help
This option enables support for LEDs connected to GPIO lines
on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
......
......@@ -395,7 +395,7 @@ config MMC_SPI
config MMC_S3C
tristate "Samsung S3C SD/MMC Card Interface support"
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
help
This selects a driver for the MCI interface found in
Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
......
......@@ -187,7 +187,7 @@ config MTD_NAND_PPCHAMELEONEVB
config MTD_NAND_S3C2410
tristate "NAND Flash support for Samsung S3C SoCs"
depends on ARCH_S3C2410 || ARCH_S3C64XX
depends on ARCH_S3C24XX || ARCH_S3C64XX
help
This enables the NAND flash controller on the S3C24xx and S3C64xx
SoCs
......
......@@ -748,7 +748,7 @@ config HAVE_S3C_RTC
config RTC_DRV_S3C
tristate "Samsung S3C series SoC RTC"
depends on ARCH_S3C2410 || ARCH_S3C64XX || HAVE_S3C_RTC
depends on ARCH_S3C64XX || HAVE_S3C_RTC
help
RTC (Realtime Clock) driver for the clock inbuilt into the
Samsung S3C24XX series of SoCs. This can provide periodic
......
......@@ -281,7 +281,7 @@ config SPI_PXA2XX_PCI
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C2410 && EXPERIMENTAL
depends on ARCH_S3C24XX && EXPERIMENTAL
select SPI_BITBANG
help
SPI driver for Samsung S3C24XX series ARM SoCs
......
......@@ -37,7 +37,7 @@ config USB_ARCH_HAS_OHCI
# ARM:
default y if SA1111
default y if ARCH_OMAP
default y if ARCH_S3C2410
default y if ARCH_S3C24XX
default y if PXA27x
default y if PXA3xx
default y if ARCH_EP93XX
......
......@@ -284,7 +284,7 @@ config USB_IMX
config USB_S3C2410
tristate "S3C2410 USB Device Controller"
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
help
Samsung's S3C2410 is an ARM-4 processor with an integrated
full speed USB 1.1 device controller. It has 4 configurable
......@@ -299,7 +299,7 @@ config USB_S3C2410_DEBUG
config USB_S3C_HSUDC
tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
depends on ARCH_S3C2410
depends on ARCH_S3C24XX
select USB_GADGET_DUALSPEED
help
Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
......
......@@ -1000,7 +1000,7 @@ MODULE_LICENSE ("GPL");
#define SA1111_DRIVER ohci_hcd_sa1111_driver
#endif
#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
#include "ohci-s3c2410.c"
#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver
#endif
......
......@@ -2061,7 +2061,7 @@ config FB_S3C_DEBUG_REGWRITE
config FB_S3C2410
tristate "S3C2410 LCD framebuffer support"
depends on FB && ARCH_S3C2410
depends on FB && ARCH_S3C24XX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
......
......@@ -170,7 +170,7 @@ config HAVE_S3C2410_WATCHDOG
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
depends on HAVE_S3C2410_WATCHDOG
select WATCHDOG_CORE
help
Watchdog timer block in the Samsung SoCs. This will reboot
......
config SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4
depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4
select S3C64XX_DMA if ARCH_S3C64XX
select S3C2410_DMA if ARCH_S3C2410
select S3C2410_DMA if ARCH_S3C24XX
help
Say Y or M if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
......@@ -84,7 +84,7 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710
config SND_SOC_SAMSUNG_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
depends on SND_SOC_SAMSUNG && ARCH_S3C2410
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
select S3C2410_DMA
select AC97_BUS
select SND_SOC_AC97_CODEC
......@@ -95,7 +95,7 @@ config SND_SOC_SAMSUNG_LN2440SBC_ALC650
config SND_SOC_SAMSUNG_S3C24XX_UDA134X
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
depends on SND_SOC_SAMSUNG && ARCH_S3C2410
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_L3
select SND_SOC_UDA134X
......@@ -107,14 +107,14 @@ config SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
depends on SND_SOC_SAMSUNG && ARCH_S3C2410
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC23
select SND_SOC_SAMSUNG_SIMTEC
config SND_SOC_SAMSUNG_SIMTEC_HERMES
tristate "SoC I2S Audio support for Simtec Hermes board"
depends on SND_SOC_SAMSUNG && ARCH_S3C2410
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC3X
select SND_SOC_SAMSUNG_SIMTEC
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment