PHY: add BCM5464 support to broadcom PHY driver

The BCM5464 can be used with the current broadcom PHY driver
by just adding the appropriate chip ID and using the existing
support within.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/net/phy/broadcom.c

@@ -176,6 +176,20 @@ static struct phy_driver bcm5461_driver = {
 	.driver 	= { .owner = THIS_MODULE },
 };
 
+static struct phy_driver bcm5464_driver = {
+	.phy_id		= 0x002060b0,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5464",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= bcm54xx_ack_interrupt,
+	.config_intr	= bcm54xx_config_intr,
+	.driver 	= { .owner = THIS_MODULE },
+};
+
 static struct phy_driver bcm5481_driver = {
 	.phy_id		= 0x0143bca0,
 	.phy_id_mask	= 0xfffffff0,
@@ -217,6 +231,9 @@ static int __init broadcom_init(void)
 	ret = phy_driver_register(&bcm5461_driver);
 	if (ret)
 		goto out_5461;
+	ret = phy_driver_register(&bcm5464_driver);
+	if (ret)
+		goto out_5464;
 	ret = phy_driver_register(&bcm5481_driver);
 	if (ret)
 		goto out_5481;
@@ -228,6 +245,8 @@ static int __init broadcom_init(void)
 out_5482:
 	phy_driver_unregister(&bcm5481_driver);
 out_5481:
+	phy_driver_unregister(&bcm5464_driver);
+out_5464:
 	phy_driver_unregister(&bcm5461_driver);
 out_5461:
 	phy_driver_unregister(&bcm5421_driver);
@@ -241,6 +260,7 @@ static void __exit broadcom_exit(void)
 {
 	phy_driver_unregister(&bcm5482_driver);
 	phy_driver_unregister(&bcm5481_driver);
+	phy_driver_unregister(&bcm5464_driver);
 	phy_driver_unregister(&bcm5461_driver);
 	phy_driver_unregister(&bcm5421_driver);
 	phy_driver_unregister(&bcm5411_driver);