Commit b174e79e authored by Ajay Kumar's avatar Ajay Kumar Committed by Kukjin Kim

ARM: dts: represent bridge and panel connection for exynos5250-snow

Define videoports and use endpoints to describe the connection between
the encoder, bridge and the panel, instead of using phandles.
Signed-off-by: default avatarAjay Kumar <ajaykumar.rs@samsung.com>
Acked-by: default avatarInki Dae <inki.dae@samsung.com>
Tested-by: default avatarRahul Sharma <rahul.sharma@samsung.com>
Tested-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: default avatarSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: default avatarKukjin Kim <kgene@kernel.org>
parent d0cf8bc7
......@@ -183,7 +183,20 @@ ptn3460: lvds-bridge@20 {
powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
edid-emulation = <5>;
panel = <&panel>;
ports {
port@0 {
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
port@1 {
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};
};
};
};
};
......@@ -228,6 +241,12 @@ panel: panel {
compatible = "auo,b116xw03";
power-supply = <&fet6>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&bridge_out>;
};
};
};
mmc3_pwrseq: mmc3_pwrseq {
......@@ -250,7 +269,14 @@ &dp {
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
bridge = <&ptn3460>;
ports {
port@0 {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
};
};
};
&ehci {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment