Commit b17db8c0 authored by David S. Miller's avatar David S. Miller

Merge branch 'DPAA-Ethernet-fixes'

Madalin Bucur says:

====================
DPAA Ethernet fixes

Fixed an issue on the Tx path that was visible in netperf
TCP_SENDFILE tests. Addressed another issue with Rx errors
not being always counted. Adding control for allmulti.

v2: rephrased commit message, reduced changes in the SG mapping fix
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents afdd6ae3 c893238e
......@@ -454,6 +454,16 @@ static void dpaa_set_rx_mode(struct net_device *net_dev)
err);
}
if (!!(net_dev->flags & IFF_ALLMULTI) != priv->mac_dev->allmulti) {
priv->mac_dev->allmulti = !priv->mac_dev->allmulti;
err = priv->mac_dev->set_allmulti(priv->mac_dev->fman_mac,
priv->mac_dev->allmulti);
if (err < 0)
netif_err(priv, drv, net_dev,
"mac_dev->set_allmulti() = %d\n",
err);
}
err = priv->mac_dev->set_multi(net_dev, priv->mac_dev);
if (err < 0)
netif_err(priv, drv, net_dev, "mac_dev->set_multi() = %d\n",
......@@ -1916,8 +1926,10 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
goto csum_failed;
}
/* SGT[0] is used by the linear part */
sgt = (struct qm_sg_entry *)(sgt_buf + priv->tx_headroom);
qm_sg_entry_set_len(&sgt[0], skb_headlen(skb));
frag_len = skb_headlen(skb);
qm_sg_entry_set_len(&sgt[0], frag_len);
sgt[0].bpid = FSL_DPAA_BPID_INV;
sgt[0].offset = 0;
addr = dma_map_single(dev, skb->data,
......@@ -1930,9 +1942,9 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
qm_sg_entry_set64(&sgt[0], addr);
/* populate the rest of SGT entries */
frag = &skb_shinfo(skb)->frags[0];
frag_len = frag->size;
for (i = 1; i <= nr_frags; i++, frag++) {
for (i = 0; i < nr_frags; i++) {
frag = &skb_shinfo(skb)->frags[i];
frag_len = frag->size;
WARN_ON(!skb_frag_page(frag));
addr = skb_frag_dma_map(dev, frag, 0,
frag_len, dma_dir);
......@@ -1942,15 +1954,16 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
goto sg_map_failed;
}
qm_sg_entry_set_len(&sgt[i], frag_len);
sgt[i].bpid = FSL_DPAA_BPID_INV;
sgt[i].offset = 0;
qm_sg_entry_set_len(&sgt[i + 1], frag_len);
sgt[i + 1].bpid = FSL_DPAA_BPID_INV;
sgt[i + 1].offset = 0;
/* keep the offset in the address */
qm_sg_entry_set64(&sgt[i], addr);
frag_len = frag->size;
qm_sg_entry_set64(&sgt[i + 1], addr);
}
qm_sg_entry_set_f(&sgt[i - 1], frag_len);
/* Set the final bit in the last used entry of the SGT */
qm_sg_entry_set_f(&sgt[nr_frags], frag_len);
qm_fd_set_sg(fd, priv->tx_headroom, skb->len);
......@@ -2052,19 +2065,23 @@ static int dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
/* MAX_SKB_FRAGS is equal or larger than our dpaa_SGT_MAX_ENTRIES;
* make sure we don't feed FMan with more fragments than it supports.
*/
if (nonlinear &&
likely(skb_shinfo(skb)->nr_frags < DPAA_SGT_MAX_ENTRIES)) {
/* Just create a S/G fd based on the skb */
err = skb_to_sg_fd(priv, skb, &fd);
percpu_priv->tx_frag_skbuffs++;
} else {
if (unlikely(nonlinear &&
(skb_shinfo(skb)->nr_frags >= DPAA_SGT_MAX_ENTRIES))) {
/* If the egress skb contains more fragments than we support
* we have no choice but to linearize it ourselves.
*/
if (unlikely(nonlinear) && __skb_linearize(skb))
if (__skb_linearize(skb))
goto enomem;
/* Finally, create a contig FD from this skb */
nonlinear = skb_is_nonlinear(skb);
}
if (nonlinear) {
/* Just create a S/G fd based on the skb */
err = skb_to_sg_fd(priv, skb, &fd);
percpu_priv->tx_frag_skbuffs++;
} else {
/* Create a contig FD from this skb */
err = skb_to_contig_fd(priv, skb, &fd, &offset);
}
if (unlikely(err < 0))
......@@ -2201,14 +2218,8 @@ static enum qman_cb_dqrr_result rx_error_dqrr(struct qman_portal *portal,
if (dpaa_eth_napi_schedule(percpu_priv, portal))
return qman_cb_dqrr_stop;
if (dpaa_eth_refill_bpools(priv))
/* Unable to refill the buffer pool due to insufficient
* system memory. Just release the frame back into the pool,
* otherwise we'll soon end up with an empty buffer pool.
*/
dpaa_fd_release(net_dev, &dq->fd);
else
dpaa_rx_error(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
dpaa_eth_refill_bpools(priv);
dpaa_rx_error(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
return qman_cb_dqrr_consume;
}
......
......@@ -1117,6 +1117,25 @@ int dtsec_add_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr)
return 0;
}
int dtsec_set_allmulti(struct fman_mac *dtsec, bool enable)
{
u32 tmp;
struct dtsec_regs __iomem *regs = dtsec->regs;
if (!is_init_done(dtsec->dtsec_drv_param))
return -EINVAL;
tmp = ioread32be(&regs->rctrl);
if (enable)
tmp |= RCTRL_MPROM;
else
tmp &= ~RCTRL_MPROM;
iowrite32be(tmp, &regs->rctrl);
return 0;
}
int dtsec_del_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr)
{
struct dtsec_regs __iomem *regs = dtsec->regs;
......
......@@ -55,5 +55,6 @@ int dtsec_set_exception(struct fman_mac *dtsec,
int dtsec_add_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr);
int dtsec_del_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr);
int dtsec_get_version(struct fman_mac *dtsec, u32 *mac_version);
int dtsec_set_allmulti(struct fman_mac *dtsec, bool enable);
#endif /* __DTSEC_H */
......@@ -350,6 +350,7 @@ struct fman_mac {
struct fman_rev_info fm_rev_info;
bool basex_if;
struct phy_device *pcsphy;
bool allmulti_enabled;
};
static void add_addr_in_paddr(struct memac_regs __iomem *regs, u8 *adr,
......@@ -940,6 +941,29 @@ int memac_add_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr)
return 0;
}
int memac_set_allmulti(struct fman_mac *memac, bool enable)
{
u32 entry;
struct memac_regs __iomem *regs = memac->regs;
if (!is_init_done(memac->memac_drv_param))
return -EINVAL;
if (enable) {
for (entry = 0; entry < HASH_TABLE_SIZE; entry++)
iowrite32be(entry | HASH_CTRL_MCAST_EN,
&regs->hashtable_ctrl);
} else {
for (entry = 0; entry < HASH_TABLE_SIZE; entry++)
iowrite32be(entry & ~HASH_CTRL_MCAST_EN,
&regs->hashtable_ctrl);
}
memac->allmulti_enabled = enable;
return 0;
}
int memac_del_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr)
{
struct memac_regs __iomem *regs = memac->regs;
......@@ -963,8 +987,12 @@ int memac_del_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr)
break;
}
}
if (list_empty(&memac->multicast_addr_hash->lsts[hash]))
iowrite32be(hash & ~HASH_CTRL_MCAST_EN, &regs->hashtable_ctrl);
if (!memac->allmulti_enabled) {
if (list_empty(&memac->multicast_addr_hash->lsts[hash]))
iowrite32be(hash & ~HASH_CTRL_MCAST_EN,
&regs->hashtable_ctrl);
}
return 0;
}
......
......@@ -57,5 +57,6 @@ int memac_set_exception(struct fman_mac *memac,
enum fman_mac_exceptions exception, bool enable);
int memac_add_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr);
int memac_del_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr);
int memac_set_allmulti(struct fman_mac *memac, bool enable);
#endif /* __MEMAC_H */
......@@ -217,6 +217,7 @@ struct fman_mac {
struct tgec_cfg *cfg;
void *fm;
struct fman_rev_info fm_rev_info;
bool allmulti_enabled;
};
static void set_mac_address(struct tgec_regs __iomem *regs, u8 *adr)
......@@ -564,6 +565,29 @@ int tgec_add_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr)
return 0;
}
int tgec_set_allmulti(struct fman_mac *tgec, bool enable)
{
u32 entry;
struct tgec_regs __iomem *regs = tgec->regs;
if (!is_init_done(tgec->cfg))
return -EINVAL;
if (enable) {
for (entry = 0; entry < TGEC_HASH_TABLE_SIZE; entry++)
iowrite32be(entry | TGEC_HASH_MCAST_EN,
&regs->hashtable_ctrl);
} else {
for (entry = 0; entry < TGEC_HASH_TABLE_SIZE; entry++)
iowrite32be(entry & ~TGEC_HASH_MCAST_EN,
&regs->hashtable_ctrl);
}
tgec->allmulti_enabled = enable;
return 0;
}
int tgec_del_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr)
{
struct tgec_regs __iomem *regs = tgec->regs;
......@@ -591,9 +615,12 @@ int tgec_del_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr)
break;
}
}
if (list_empty(&tgec->multicast_addr_hash->lsts[hash]))
iowrite32be((hash & ~TGEC_HASH_MCAST_EN),
&regs->hashtable_ctrl);
if (!tgec->allmulti_enabled) {
if (list_empty(&tgec->multicast_addr_hash->lsts[hash]))
iowrite32be((hash & ~TGEC_HASH_MCAST_EN),
&regs->hashtable_ctrl);
}
return 0;
}
......
......@@ -51,5 +51,6 @@ int tgec_set_exception(struct fman_mac *tgec,
int tgec_add_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr);
int tgec_del_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr);
int tgec_get_version(struct fman_mac *tgec, u32 *mac_version);
int tgec_set_allmulti(struct fman_mac *tgec, bool enable);
#endif /* __TGEC_H */
......@@ -470,6 +470,7 @@ static void setup_dtsec(struct mac_device *mac_dev)
mac_dev->set_tx_pause = dtsec_set_tx_pause_frames;
mac_dev->set_rx_pause = dtsec_accept_rx_pause_frames;
mac_dev->set_exception = dtsec_set_exception;
mac_dev->set_allmulti = dtsec_set_allmulti;
mac_dev->set_multi = set_multi;
mac_dev->start = start;
mac_dev->stop = stop;
......@@ -488,6 +489,7 @@ static void setup_tgec(struct mac_device *mac_dev)
mac_dev->set_tx_pause = tgec_set_tx_pause_frames;
mac_dev->set_rx_pause = tgec_accept_rx_pause_frames;
mac_dev->set_exception = tgec_set_exception;
mac_dev->set_allmulti = tgec_set_allmulti;
mac_dev->set_multi = set_multi;
mac_dev->start = start;
mac_dev->stop = stop;
......@@ -506,6 +508,7 @@ static void setup_memac(struct mac_device *mac_dev)
mac_dev->set_tx_pause = memac_set_tx_pause_frames;
mac_dev->set_rx_pause = memac_accept_rx_pause_frames;
mac_dev->set_exception = memac_set_exception;
mac_dev->set_allmulti = memac_set_allmulti;
mac_dev->set_multi = set_multi;
mac_dev->start = start;
mac_dev->stop = stop;
......
......@@ -59,6 +59,7 @@ struct mac_device {
bool rx_pause_active;
bool tx_pause_active;
bool promisc;
bool allmulti;
int (*init)(struct mac_device *mac_dev);
int (*start)(struct mac_device *mac_dev);
......@@ -66,6 +67,7 @@ struct mac_device {
void (*adjust_link)(struct mac_device *mac_dev);
int (*set_promisc)(struct fman_mac *mac_dev, bool enable);
int (*change_addr)(struct fman_mac *mac_dev, enet_addr_t *enet_addr);
int (*set_allmulti)(struct fman_mac *mac_dev, bool enable);
int (*set_multi)(struct net_device *net_dev,
struct mac_device *mac_dev);
int (*set_rx_pause)(struct fman_mac *mac_dev, bool en);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment