ath10k: add qca4019 hw params

Add a new entry in hw_params_list for qca4019 with list of
it's own details.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.c

@@ -201,6 +201,26 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
 		},
 	},
+	{
+		.id = QCA4019_HW_1_0_DEV_VERSION,
+		.dev_id = 0,
+		.name = "qca4019 hw1.0",
+		.patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR,
+		.uart_pin = 7,
+		.otp_exe_param = 0x0010000,
+		.continuous_frag_desc = true,
+		.channel_counters_freq_hz = 125000,
+		.max_probe_resp_desc_thres = 24,
+		.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+		.fw = {
+			.dir = QCA4019_HW_1_0_FW_DIR,
+			.fw = QCA4019_HW_1_0_FW_FILE,
+			.otp = QCA4019_HW_1_0_OTP_FILE,
+			.board = QCA4019_HW_1_0_BOARD_DATA_FILE,
+			.board_size = QCA4019_BOARD_DATA_SZ,
+			.board_ext_size = QCA4019_BOARD_EXT_DATA_SZ,
+		},
+	},
 };
 
 static const char *const ath10k_core_fw_feature_str[] = {

drivers/net/wireless/ath/ath10k/hw.h

@@ -106,6 +106,14 @@ enum qca9377_chip_id_rev {
 #define QCA9377_HW_1_0_BOARD_DATA_FILE "board.bin"
 #define QCA9377_HW_1_0_PATCH_LOAD_ADDR	0x1234
 
+/* QCA4019 1.0 definitions */
+#define QCA4019_HW_1_0_DEV_VERSION     0x01000000
+#define QCA4019_HW_1_0_FW_DIR          ATH10K_FW_DIR "/QCA4019/hw1.0"
+#define QCA4019_HW_1_0_FW_FILE         "firmware.bin"
+#define QCA4019_HW_1_0_OTP_FILE        "otp.bin"
+#define QCA4019_HW_1_0_BOARD_DATA_FILE "board.bin"
+#define QCA4019_HW_1_0_PATCH_LOAD_ADDR  0x1234
+
 #define ATH10K_FW_API2_FILE		"firmware-2.bin"
 #define ATH10K_FW_API3_FILE		"firmware-3.bin"
 

drivers/net/wireless/ath/ath10k/targaddrs.h

@@ -456,4 +456,7 @@ Fw Mode/SubMode Mask
 #define QCA99X0_BOARD_DATA_SZ	  12288
 #define QCA99X0_BOARD_EXT_DATA_SZ 0
 
+#define QCA4019_BOARD_DATA_SZ	  12064
+#define QCA4019_BOARD_EXT_DATA_SZ 0
+
 #endif /* __TARGADDRS_H__ */