Commit b1f2beb8 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - several fixes for new drivers added for Kernel 4.8 addition (cec
   core, pulse8 cec driver and Mediatek vcodec)

 - a regression fix for cx23885 and saa7134 drivers

 - an important fix for rcar-fcp, making rcar_fcp_enable() return 0 on
   success

* tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (25 commits)
  [media] cx23885/saa7134: assign q->dev to the PCI device
  [media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success
  [media] cec: fix ioctl return code when not registered
  [media] cec: don't Feature Abort broadcast msgs when unregistered
  [media] vcodec:mediatek: Refine VP8 encoder driver
  [media] vcodec:mediatek: Refine H264 encoder driver
  [media] vcodec:mediatek: change H264 profile default to profile high
  [media] vcodec:mediatek: Add timestamp and timecode copy for V4L2 Encoder
  [media] vcodec:mediatek: Fix visible_height larger than coded_height issue in s_fmt_out
  [media] vcodec:mediatek: Fix fops_vcodec_release flow for V4L2 Encoder
  [media] vcodec:mediatek:code refine for v4l2 Encoder driver
  [media] cec-funcs.h: add missing vendor-specific messages
  [media] cec-edid: check for IEEE identifier
  [media] pulse8-cec: fix error handling
  [media] pulse8-cec: set correct Signal Free Time
  [media] mtk-vcodec: add HAS_DMA dependency
  [media] cec: ignore messages when log_addr_mask == 0
  [media] cec: add item to TODO
  [media] cec: set unclaimed addresses to CEC_LOG_ADDR_INVALID
  [media] cec: add CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK flag
  ...
parents f887c21e d8feef9b
......@@ -144,7 +144,7 @@ logical address types are already defined will return with error ``EBUSY``.
- ``flags``
- Flags. No flags are defined yet, so set this to 0.
- Flags. See :ref:`cec-log-addrs-flags` for a list of available flags.
- .. row 7
......@@ -201,6 +201,25 @@ logical address types are already defined will return with error ``EBUSY``.
give the CEC framework more information about the device type, even
though the framework won't use it directly in the CEC message.
.. _cec-log-addrs-flags:
.. flat-table:: Flags for struct cec_log_addrs
:header-rows: 0
:stub-columns: 0
:widths: 3 1 4
- .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`:
- ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK``
- 1
- By default if no logical address of the requested type can be claimed, then
it will go back to the unconfigured state. If this flag is set, then it will
fallback to the Unregistered logical address. Note that if the Unregistered
logical address was explicitly requested, then this flag has no effect.
.. _cec-versions:
.. flat-table:: CEC Versions
......
......@@ -64,7 +64,8 @@ it is guaranteed that the state did change in between the two events.
- ``phys_addr``
- The current physical address.
- The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
valid physical address is set.
- .. row 2
......@@ -72,7 +73,10 @@ it is guaranteed that the state did change in between the two events.
- ``log_addr_mask``
- The current set of claimed logical addresses.
- The current set of claimed logical addresses. This is 0 if no logical
addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
has the unregistered logical address. In that case all other bits are 0.
......
......@@ -70,7 +70,10 @@ static unsigned int cec_get_edid_spa_location(const u8 *edid, unsigned int size)
u8 tag = edid[i] >> 5;
u8 len = edid[i] & 0x1f;
if (tag == 3 && len >= 5 && i + len <= end)
if (tag == 3 && len >= 5 && i + len <= end &&
edid[i + 1] == 0x03 &&
edid[i + 2] == 0x0c &&
edid[i + 3] == 0x00)
return i + 4;
i += len + 1;
} while (i < end);
......
......@@ -1552,6 +1552,7 @@ int cx23885_417_register(struct cx23885_dev *dev)
q->mem_ops = &vb2_dma_sg_memops;
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->lock = &dev->lock;
q->dev = &dev->pci->dev;
err = vb2_queue_init(q);
if (err < 0)
......
......@@ -1238,6 +1238,7 @@ static int dvb_init(struct saa7134_dev *dev)
q->buf_struct_size = sizeof(struct saa7134_buf);
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->lock = &dev->lock;
q->dev = &dev->pci->dev;
ret = vb2_queue_init(q);
if (ret) {
vb2_dvb_dealloc_frontends(&dev->frontends);
......
......@@ -295,6 +295,7 @@ static int empress_init(struct saa7134_dev *dev)
q->buf_struct_size = sizeof(struct saa7134_buf);
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->lock = &dev->lock;
q->dev = &dev->pci->dev;
err = vb2_queue_init(q);
if (err)
return err;
......
......@@ -169,7 +169,7 @@ config VIDEO_MEDIATEK_VPU
config VIDEO_MEDIATEK_VCODEC
tristate "Mediatek Video Codec driver"
depends on MTK_IOMMU || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2
depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
depends on ARCH_MEDIATEK || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
......
......@@ -23,7 +23,6 @@
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-core.h>
#include "mtk_vcodec_util.h"
#define MTK_VCODEC_DRV_NAME "mtk_vcodec_drv"
#define MTK_VCODEC_ENC_NAME "mtk-vcodec-enc"
......
......@@ -487,7 +487,6 @@ static int vidioc_venc_s_fmt_out(struct file *file, void *priv,
struct mtk_q_data *q_data;
int ret, i;
struct mtk_video_fmt *fmt;
unsigned int pitch_w_div16;
struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
......@@ -530,15 +529,6 @@ static int vidioc_venc_s_fmt_out(struct file *file, void *priv,
q_data->coded_width = f->fmt.pix_mp.width;
q_data->coded_height = f->fmt.pix_mp.height;
pitch_w_div16 = DIV_ROUND_UP(q_data->visible_width, 16);
if (pitch_w_div16 % 8 != 0) {
/* Adjust returned width/height, so application could correctly
* allocate hw required memory
*/
q_data->visible_height += 32;
vidioc_try_fmt(f, q_data->fmt);
}
q_data->field = f->fmt.pix_mp.field;
ctx->colorspace = f->fmt.pix_mp.colorspace;
ctx->ycbcr_enc = f->fmt.pix_mp.ycbcr_enc;
......@@ -878,7 +868,8 @@ static int mtk_venc_encode_header(void *priv)
{
struct mtk_vcodec_ctx *ctx = priv;
int ret;
struct vb2_buffer *dst_buf;
struct vb2_buffer *src_buf, *dst_buf;
struct vb2_v4l2_buffer *dst_vb2_v4l2, *src_vb2_v4l2;
struct mtk_vcodec_mem bs_buf;
struct venc_done_result enc_result;
......@@ -911,6 +902,15 @@ static int mtk_venc_encode_header(void *priv)
mtk_v4l2_err("venc_if_encode failed=%d", ret);
return -EINVAL;
}
src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
if (src_buf) {
src_vb2_v4l2 = to_vb2_v4l2_buffer(src_buf);
dst_vb2_v4l2 = to_vb2_v4l2_buffer(dst_buf);
dst_buf->timestamp = src_buf->timestamp;
dst_vb2_v4l2->timecode = src_vb2_v4l2->timecode;
} else {
mtk_v4l2_err("No timestamp for the header buffer.");
}
ctx->state = MTK_STATE_HEADER;
dst_buf->planes[0].bytesused = enc_result.bs_size;
......@@ -1003,7 +1003,7 @@ static void mtk_venc_worker(struct work_struct *work)
struct mtk_vcodec_mem bs_buf;
struct venc_done_result enc_result;
int ret, i;
struct vb2_v4l2_buffer *vb2_v4l2;
struct vb2_v4l2_buffer *dst_vb2_v4l2, *src_vb2_v4l2;
/* check dst_buf, dst_buf may be removed in device_run
* to stored encdoe header so we need check dst_buf and
......@@ -1043,9 +1043,14 @@ static void mtk_venc_worker(struct work_struct *work)
ret = venc_if_encode(ctx, VENC_START_OPT_ENCODE_FRAME,
&frm_buf, &bs_buf, &enc_result);
vb2_v4l2 = container_of(dst_buf, struct vb2_v4l2_buffer, vb2_buf);
src_vb2_v4l2 = to_vb2_v4l2_buffer(src_buf);
dst_vb2_v4l2 = to_vb2_v4l2_buffer(dst_buf);
dst_buf->timestamp = src_buf->timestamp;
dst_vb2_v4l2->timecode = src_vb2_v4l2->timecode;
if (enc_result.is_key_frm)
vb2_v4l2->flags |= V4L2_BUF_FLAG_KEYFRAME;
dst_vb2_v4l2->flags |= V4L2_BUF_FLAG_KEYFRAME;
if (ret) {
v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf),
......@@ -1217,7 +1222,7 @@ int mtk_vcodec_enc_ctrls_setup(struct mtk_vcodec_ctx *ctx)
0, V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE);
v4l2_ctrl_new_std_menu(handler, ops, V4L2_CID_MPEG_VIDEO_H264_PROFILE,
V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
0, V4L2_MPEG_VIDEO_H264_PROFILE_MAIN);
0, V4L2_MPEG_VIDEO_H264_PROFILE_HIGH);
v4l2_ctrl_new_std_menu(handler, ops, V4L2_CID_MPEG_VIDEO_H264_LEVEL,
V4L2_MPEG_VIDEO_H264_LEVEL_4_2,
0, V4L2_MPEG_VIDEO_H264_LEVEL_4_0);
......@@ -1288,5 +1293,10 @@ int mtk_venc_lock(struct mtk_vcodec_ctx *ctx)
void mtk_vcodec_enc_release(struct mtk_vcodec_ctx *ctx)
{
venc_if_deinit(ctx);
int ret = venc_if_deinit(ctx);
if (ret)
mtk_v4l2_err("venc_if_deinit failed=%d", ret);
ctx->state = MTK_STATE_FREE;
}
......@@ -218,11 +218,15 @@ static int fops_vcodec_release(struct file *file)
mtk_v4l2_debug(1, "[%d] encoder", ctx->id);
mutex_lock(&dev->dev_mutex);
/*
* Call v4l2_m2m_ctx_release to make sure the worker thread is not
* running after venc_if_deinit.
*/
v4l2_m2m_ctx_release(ctx->m2m_ctx);
mtk_vcodec_enc_release(ctx);
v4l2_fh_del(&ctx->fh);
v4l2_fh_exit(&ctx->fh);
v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
v4l2_m2m_ctx_release(ctx->m2m_ctx);
list_del_init(&ctx->list);
dev->num_instances--;
......
......@@ -16,7 +16,6 @@
#define _MTK_VCODEC_INTR_H_
#define MTK_INST_IRQ_RECEIVED 0x1
#define MTK_INST_WORK_THREAD_ABORT_DONE 0x2
struct mtk_vcodec_ctx;
......
......@@ -61,6 +61,8 @@ enum venc_h264_bs_mode {
/*
* struct venc_h264_vpu_config - Structure for h264 encoder configuration
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
* @input_fourcc: input fourcc
* @bitrate: target bitrate (in bps)
* @pic_w: picture width. Picture size is visible stream resolution, in pixels,
......@@ -94,13 +96,13 @@ struct venc_h264_vpu_config {
/*
* struct venc_h264_vpu_buf - Structure for buffer information
* @align: buffer alignment (in bytes)
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
* @iova: IO virtual address
* @vpua: VPU side memory addr which is used by RC_CODE
* @size: buffer size (in bytes)
*/
struct venc_h264_vpu_buf {
u32 align;
u32 iova;
u32 vpua;
u32 size;
......@@ -108,6 +110,8 @@ struct venc_h264_vpu_buf {
/*
* struct venc_h264_vsi - Structure for VPU driver control and info share
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
* This structure is allocated in VPU side and shared to AP side.
* @config: h264 encoder configuration
* @work_bufs: working buffer information in VPU side
......@@ -150,12 +154,6 @@ struct venc_h264_inst {
struct mtk_vcodec_ctx *ctx;
};
static inline void h264_write_reg(struct venc_h264_inst *inst, u32 addr,
u32 val)
{
writel(val, inst->hw_base + addr);
}
static inline u32 h264_read_reg(struct venc_h264_inst *inst, u32 addr)
{
return readl(inst->hw_base + addr);
......@@ -214,6 +212,8 @@ static unsigned int h264_get_level(struct venc_h264_inst *inst,
return 40;
case V4L2_MPEG_VIDEO_H264_LEVEL_4_1:
return 41;
case V4L2_MPEG_VIDEO_H264_LEVEL_4_2:
return 42;
default:
mtk_vcodec_debug(inst, "unsupported level %d", level);
return 31;
......
......@@ -56,6 +56,8 @@ enum venc_vp8_vpu_work_buf {
/*
* struct venc_vp8_vpu_config - Structure for vp8 encoder configuration
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
* @input_fourcc: input fourcc
* @bitrate: target bitrate (in bps)
* @pic_w: picture width. Picture size is visible stream resolution, in pixels,
......@@ -83,14 +85,14 @@ struct venc_vp8_vpu_config {
};
/*
* struct venc_vp8_vpu_buf -Structure for buffer information
* @align: buffer alignment (in bytes)
* struct venc_vp8_vpu_buf - Structure for buffer information
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
* @iova: IO virtual address
* @vpua: VPU side memory addr which is used by RC_CODE
* @size: buffer size (in bytes)
*/
struct venc_vp8_vpu_buf {
u32 align;
u32 iova;
u32 vpua;
u32 size;
......@@ -98,6 +100,8 @@ struct venc_vp8_vpu_buf {
/*
* struct venc_vp8_vsi - Structure for VPU driver control and info share
* AP-W/R : AP is writer/reader on this item
* VPU-W/R: VPU is write/reader on this item
* This structure is allocated in VPU side and shared to AP side.
* @config: vp8 encoder configuration
* @work_bufs: working buffer information in VPU side
......@@ -138,12 +142,6 @@ struct venc_vp8_inst {
struct mtk_vcodec_ctx *ctx;
};
static inline void vp8_enc_write_reg(struct venc_vp8_inst *inst, u32 addr,
u32 val)
{
writel(val, inst->hw_base + addr);
}
static inline u32 vp8_enc_read_reg(struct venc_vp8_inst *inst, u32 addr)
{
return readl(inst->hw_base + addr);
......
......@@ -99,10 +99,16 @@ EXPORT_SYMBOL_GPL(rcar_fcp_put);
*/
int rcar_fcp_enable(struct rcar_fcp_device *fcp)
{
int error;
if (!fcp)
return 0;
return pm_runtime_get_sync(fcp->dev);
error = pm_runtime_get_sync(fcp->dev);
if (error < 0)
return error;
return 0;
}
EXPORT_SYMBOL_GPL(rcar_fcp_enable);
......
......@@ -12,6 +12,7 @@ Hopefully this will happen later in 2016.
Other TODOs:
- There are two possible replies to CEC_MSG_INITIATE_ARC. How to handle that?
- Add a flag to inhibit passing CEC RC messages to the rc subsystem.
Applications should be able to choose this when calling S_LOG_ADDRS.
- If the reply field of cec_msg is set then when the reply arrives it
......
......@@ -124,10 +124,10 @@ static void cec_queue_event(struct cec_adapter *adap,
u64 ts = ktime_get_ns();
struct cec_fh *fh;
mutex_lock(&adap->devnode.fhs_lock);
mutex_lock(&adap->devnode.lock);
list_for_each_entry(fh, &adap->devnode.fhs, list)
cec_queue_event_fh(fh, ev, ts);
mutex_unlock(&adap->devnode.fhs_lock);
mutex_unlock(&adap->devnode.lock);
}
/*
......@@ -191,12 +191,12 @@ static void cec_queue_msg_monitor(struct cec_adapter *adap,
u32 monitor_mode = valid_la ? CEC_MODE_MONITOR :
CEC_MODE_MONITOR_ALL;
mutex_lock(&adap->devnode.fhs_lock);
mutex_lock(&adap->devnode.lock);
list_for_each_entry(fh, &adap->devnode.fhs, list) {
if (fh->mode_follower >= monitor_mode)
cec_queue_msg_fh(fh, msg);
}
mutex_unlock(&adap->devnode.fhs_lock);
mutex_unlock(&adap->devnode.lock);
}
/*
......@@ -207,12 +207,12 @@ static void cec_queue_msg_followers(struct cec_adapter *adap,
{
struct cec_fh *fh;
mutex_lock(&adap->devnode.fhs_lock);
mutex_lock(&adap->devnode.lock);
list_for_each_entry(fh, &adap->devnode.fhs, list) {
if (fh->mode_follower == CEC_MODE_FOLLOWER)
cec_queue_msg_fh(fh, msg);
}
mutex_unlock(&adap->devnode.fhs_lock);
mutex_unlock(&adap->devnode.lock);
}
/* Notify userspace of an adapter state change. */
......@@ -851,6 +851,9 @@ void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg)
if (!valid_la || msg->len <= 1)
return;
if (adap->log_addrs.log_addr_mask == 0)
return;
/*
* Process the message on the protocol level. If is_reply is true,
* then cec_receive_notify() won't pass on the reply to the listener(s)
......@@ -1047,11 +1050,17 @@ static int cec_config_thread_func(void *arg)
dprintk(1, "could not claim LA %d\n", i);
}
if (adap->log_addrs.log_addr_mask == 0 &&
!(las->flags & CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK))
goto unconfigure;
configured:
if (adap->log_addrs.log_addr_mask == 0) {
/* Fall back to unregistered */
las->log_addr[0] = CEC_LOG_ADDR_UNREGISTERED;
las->log_addr_mask = 1 << las->log_addr[0];
for (i = 1; i < las->num_log_addrs; i++)
las->log_addr[i] = CEC_LOG_ADDR_INVALID;
}
adap->is_configured = true;
adap->is_configuring = false;
......@@ -1070,6 +1079,8 @@ static int cec_config_thread_func(void *arg)
cec_report_features(adap, i);
cec_report_phys_addr(adap, i);
}
for (i = las->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++)
las->log_addr[i] = CEC_LOG_ADDR_INVALID;
mutex_lock(&adap->lock);
adap->kthread_config = NULL;
mutex_unlock(&adap->lock);
......@@ -1398,7 +1409,6 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
u8 init_laddr = cec_msg_initiator(msg);
u8 devtype = cec_log_addr2dev(adap, dest_laddr);
int la_idx = cec_log_addr2idx(adap, dest_laddr);
bool is_directed = la_idx >= 0;
bool from_unregistered = init_laddr == 0xf;
struct cec_msg tx_cec_msg = { };
......@@ -1560,7 +1570,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
* Unprocessed messages are aborted if userspace isn't doing
* any processing either.
*/
if (is_directed && !is_reply && !adap->follower_cnt &&
if (!is_broadcast && !is_reply && !adap->follower_cnt &&
!adap->cec_follower && msg->msg[1] != CEC_MSG_FEATURE_ABORT)
return cec_feature_abort(adap, msg);
break;
......
......@@ -162,7 +162,7 @@ static long cec_adap_s_log_addrs(struct cec_adapter *adap, struct cec_fh *fh,
return -ENOTTY;
if (copy_from_user(&log_addrs, parg, sizeof(log_addrs)))
return -EFAULT;
log_addrs.flags = 0;
log_addrs.flags &= CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK;
mutex_lock(&adap->lock);
if (!adap->is_configuring &&
(!log_addrs.num_log_addrs || !adap->is_configured) &&
......@@ -435,7 +435,7 @@ static long cec_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
void __user *parg = (void __user *)arg;
if (!devnode->registered)
return -EIO;
return -ENODEV;
switch (cmd) {
case CEC_ADAP_G_CAPS:
......@@ -508,14 +508,14 @@ static int cec_open(struct inode *inode, struct file *filp)
filp->private_data = fh;
mutex_lock(&devnode->fhs_lock);
mutex_lock(&devnode->lock);
/* Queue up initial state events */
ev_state.state_change.phys_addr = adap->phys_addr;
ev_state.state_change.log_addr_mask = adap->log_addrs.log_addr_mask;
cec_queue_event_fh(fh, &ev_state, 0);
list_add(&fh->list, &devnode->fhs);
mutex_unlock(&devnode->fhs_lock);
mutex_unlock(&devnode->lock);
return 0;
}
......@@ -540,9 +540,9 @@ static int cec_release(struct inode *inode, struct file *filp)
cec_monitor_all_cnt_dec(adap);
mutex_unlock(&adap->lock);
mutex_lock(&devnode->fhs_lock);
mutex_lock(&devnode->lock);
list_del(&fh->list);
mutex_unlock(&devnode->fhs_lock);
mutex_unlock(&devnode->lock);
/* Unhook pending transmits from this filehandle. */
mutex_lock(&adap->lock);
......
......@@ -51,31 +51,29 @@ int cec_get_device(struct cec_devnode *devnode)
{
/*
* Check if the cec device is available. This needs to be done with
* the cec_devnode_lock held to prevent an open/unregister race:
* the devnode->lock held to prevent an open/unregister race:
* without the lock, the device could be unregistered and freed between
* the devnode->registered check and get_device() calls, leading to
* a crash.
*/
mutex_lock(&cec_devnode_lock);
mutex_lock(&devnode->lock);
/*
* return ENXIO if the cec device has been removed
* already or if it is not registered anymore.
*/
if (!devnode->registered) {
mutex_unlock(&cec_devnode_lock);
mutex_unlock(&devnode->lock);
return -ENXIO;
}
/* and increase the device refcount */
get_device(&devnode->dev);
mutex_unlock(&cec_devnode_lock);
mutex_unlock(&devnode->lock);
return 0;
}
void cec_put_device(struct cec_devnode *devnode)
{
mutex_lock(&cec_devnode_lock);
put_device(&devnode->dev);
mutex_unlock(&cec_devnode_lock);
}
/* Called when the last user of the cec device exits. */
......@@ -84,11 +82,10 @@ static void cec_devnode_release(struct device *cd)
struct cec_devnode *devnode = to_cec_devnode(cd);
mutex_lock(&cec_devnode_lock);
/* Mark device node number as free */
clear_bit(devnode->minor, cec_devnode_nums);
mutex_unlock(&cec_devnode_lock);
cec_delete_adapter(to_cec_adapter(devnode));
}
......@@ -117,7 +114,7 @@ static int __must_check cec_devnode_register(struct cec_devnode *devnode,
/* Initialization */
INIT_LIST_HEAD(&devnode->fhs);
mutex_init(&devnode->fhs_lock);
mutex_init(&devnode->lock);
/* Part 1: Find a free minor number */
mutex_lock(&cec_devnode_lock);
......@@ -160,7 +157,9 @@ static int __must_check cec_devnode_register(struct cec_devnode *devnode,
cdev_del:
cdev_del(&devnode->cdev);
clr_bit:
mutex_lock(&cec_devnode_lock);
clear_bit(devnode->minor, cec_devnode_nums);
mutex_unlock(&cec_devnode_lock);
return ret;
}
......@@ -177,17 +176,21 @@ static void cec_devnode_unregister(struct cec_devnode *devnode)
{
struct cec_fh *fh;
mutex_lock(&devnode->lock);
/* Check if devnode was never registered or already unregistered */
if (!devnode->registered || devnode->unregistered)
if (!devnode->registered || devnode->unregistered) {
mutex_unlock(&devnode->lock);
return;
}
mutex_lock(&devnode->fhs_lock);
list_for_each_entry(fh, &devnode->fhs, list)
wake_up_interruptible(&fh->wait);
mutex_unlock(&devnode->fhs_lock);
devnode->registered = false;
devnode->unregistered = true;
mutex_unlock(&devnode->lock);
device_del(&devnode->dev);
cdev_del(&devnode->cdev);
put_device(&devnode->dev);
......
......@@ -114,14 +114,11 @@ static void pulse8_irq_work_handler(struct work_struct *work)
cec_transmit_done(pulse8->adap, CEC_TX_STATUS_OK,
0, 0, 0, 0);
break;
case MSGCODE_TRANSMIT_FAILED_LINE:
cec_transmit_done(pulse8->adap, CEC_TX_STATUS_ARB_LOST,
1, 0, 0, 0);
break;
case MSGCODE_TRANSMIT_FAILED_ACK:
cec_transmit_done(pulse8->adap, CEC_TX_STATUS_NACK,
0, 1, 0, 0);
break;
case MSGCODE_TRANSMIT_FAILED_LINE:
case MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA:
case MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE:
cec_transmit_done(pulse8->adap, CEC_TX_STATUS_ERROR,
......@@ -170,6 +167,9 @@ static irqreturn_t pulse8_interrupt(struct serio *serio, unsigned char data,
case MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE:
schedule_work(&pulse8->work);
break;
case MSGCODE_HIGH_ERROR:
case MSGCODE_LOW_ERROR:
case MSGCODE_RECEIVE_FAILED:
case MSGCODE_TIMEOUT_ERROR:
break;
case MSGCODE_COMMAND_ACCEPTED:
......@@ -388,7 +388,7 @@ static int pulse8_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
int err;
cmd[0] = MSGCODE_TRANSMIT_IDLETIME;
cmd[1] = 3;
cmd[1] = signal_free_time;
err = pulse8_send_and_wait(pulse8, cmd, 2,
MSGCODE_COMMAND_ACCEPTED, 1);
cmd[0] = MSGCODE_TRANSMIT_ACK_POLARITY;
......
......@@ -162,10 +162,11 @@ static inline void cec_msg_standby(struct cec_msg *msg)
/* One Touch Record Feature */
static inline void cec_msg_record_off(struct cec_msg *msg)
static inline void cec_msg_record_off(struct cec_msg *msg, bool reply)
{
msg->len = 2;
msg->msg[1] = CEC_MSG_RECORD_OFF;
msg->reply = reply ? CEC_MSG_RECORD_STATUS : 0;
}
struct cec_op_arib_data {
......@@ -227,7 +228,7 @@ static inline void cec_set_digital_service_id(__u8 *msg,
if (digital->service_id_method == CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL) {
*msg++ = (digital->channel.channel_number_fmt << 2) |
(digital->channel.major >> 8);
*msg++ = digital->channel.major && 0xff;
*msg++ = digital->channel.major & 0xff;
*msg++ = digital->channel.minor >> 8;
*msg++ = digital->channel.minor & 0xff;
*msg++ = 0;
......@@ -323,6 +324,7 @@ static inline void cec_msg_record_on_phys_addr(struct cec_msg *msg,
}
static inline void cec_msg_record_on(struct cec_msg *msg,
bool reply,
const struct cec_op_record_src *rec_src)
{
switch (rec_src->type) {
......@@ -346,6 +348,7 @@ static inline void cec_msg_record_on(struct cec_msg *msg,
rec_src->ext_phys_addr.phys_addr);
break;
}
msg->reply = reply ? CEC_MSG_RECORD_STATUS : 0;
}
static inline void cec_ops_record_on(const struct cec_msg *msg,
......@@ -1141,6 +1144,75 @@ static inline void cec_msg_give_device_vendor_id(struct cec_msg *msg,
msg->reply = reply ? CEC_MSG_DEVICE_VENDOR_ID : 0;
}
static inline void cec_msg_vendor_command(struct cec_msg *msg,
__u8 size, const __u8 *vendor_cmd)
{
if (size > 14)
size = 14;
msg->len = 2 + size;
msg->msg[1] = CEC_MSG_VENDOR_COMMAND;
memcpy(msg->msg + 2, vendor_cmd, size);
}
static inline void cec_ops_vendor_command(const struct cec_msg *msg,
__u8 *size,
const __u8 **vendor_cmd)
{
*size = msg->len - 2;
if (*size > 14)
*size = 14;
*vendor_cmd = msg->msg + 2;
}
static inline void cec_msg_vendor_command_with_id(struct cec_msg *msg,
__u32 vendor_id, __u8 size,
const __u8 *vendor_cmd)
{
if (size > 11)
size = 11;
msg->len = 5 + size;
msg->msg[1] = CEC_MSG_VENDOR_COMMAND_WITH_ID;
msg->msg[2] = vendor_id >> 16;
msg->msg[3] = (vendor_id >> 8) & 0xff;
msg->msg[4] = vendor_id & 0xff;
memcpy(msg->msg + 5, vendor_cmd, size);
}
static inline void cec_ops_vendor_command_with_id(const struct cec_msg *msg,
__u32 *vendor_id, __u8 *size,
const __u8 **vendor_cmd)
{
*size = msg->len - 5;
if (*size > 11)
*size = 11;
*vendor_id = (msg->msg[2] << 16) | (msg->msg[3] << 8) | msg->msg[4];
*vendor_cmd = msg->msg + 5;
}
static inline void cec_msg_vendor_remote_button_down(struct cec_msg *msg,
__u8 size,
const __u8 *rc_code)
{
if (size > 14)
size = 14;
msg->len = 2 + size;
msg->msg[1] = CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN;
memcpy(msg->msg + 2, rc_code, size);
}
static inline void cec_ops_vendor_remote_button_down(const struct cec_msg *msg,
__u8 *size,
const __u8 **rc_code)
{
*size = msg->len - 2;
if (*size > 14)
*size = 14;
*rc_code = msg->msg + 2;
}
static inline void cec_msg_vendor_remote_button_up(struct cec_msg *msg)
{
msg->len = 2;
......@@ -1277,7 +1349,7 @@ static inline void cec_msg_user_control_pressed(struct cec_msg *msg,
msg->len += 4;
msg->msg[3] = (ui_cmd->channel_identifier.channel_number_fmt << 2) |
(ui_cmd->channel_identifier.major >> 8);
msg->msg[4] = ui_cmd->channel_identifier.major && 0xff;
msg->msg[4] = ui_cmd->channel_identifier.major & 0xff;
msg->msg[5] = ui_cmd->channel_identifier.minor >> 8;
msg->msg[6] = ui_cmd->channel_identifier.minor & 0xff;
break;
......
......@@ -364,7 +364,7 @@ struct cec_caps {
* @num_log_addrs: how many logical addresses should be claimed. Set by the
* caller.
* @vendor_id: the vendor ID of the device. Set by the caller.
* @flags: set to 0.
* @flags: flags.
* @osd_name: the OSD name of the device. Set by the caller.
* @primary_device_type: the primary device type for each logical address.
* Set by the caller.
......@@ -389,6 +389,9 @@ struct cec_log_addrs {
__u8 features[CEC_MAX_LOG_ADDRS][12];
};
/* Allow a fallback to unregistered */
#define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0)
/* Events */
/* Event that occurs when the adapter state changes */
......
......@@ -57,8 +57,8 @@ struct cec_devnode {
int minor;
bool registered;
bool unregistered;
struct mutex fhs_lock;
struct list_head fhs;
struct mutex lock;
};
struct cec_adapter;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment