Merge tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - Support for ZynqMP DDR controller support to synopsys_edac along with
   a driver cleanup and generalization for the addition of support for
   the new IP. (Manish Narani)

 - Removal of the /sys/bus/edac devices hierarchy. This enabled us to
   get rid of the silly memory controllers maximum number notion. (Tony
   Luck and Borislav Petkov)

 - skx_edac improvements and fixes. (Qiuxu Zhuo and Tony Luck)

 - The usual garden variety of small cleanups and fixes.

* tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits)
  EDAC, fsl_ddr: Add LS1021A to the list of supported hardware
  EDAC, i5000: Remove set but not used local variables
  MAINTAINERS, EDAC: Drop bouncing email
  EDAC, i82975x: Fix spelling mistake "reserverd" -> "reserved"
  EDAC, fsl: Move error injection under CONFIG_EDAC_DEBUG
  EDAC, skx: Let EDAC core show the decoded result for debugfs
  EDAC, skx: Move debugfs node under EDAC's hierarchy
  EDAC, skx: Prepend hex formatting with '0x'
  EDAC, skx: Fix function calling order in skx_exit()
  EDAC: Drop per-memory controller buses
  EDAC: Don't add devices under /sys/bus/edac
  EDAC: Fix indentation issues in several EDAC drivers
  EDAC, skx: Fix randconfig builds in a better way
  EDAC, i82975x: Remove set but not used variable dtype
  EDAC, qcom_edac: Remove irq_handled local variable
  EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller
  EDAC, synopsys: Add ECC support for ZynqMP DDR controller
  EDAC, synopsys: Add macro defines for ZynqMP DDRC
  dt: bindings: Document ZynqMP DDRC in Synopsys documentation
  EDAC, synopsys: Add error handling for the of_device_get_match_data() result
  ...

Documentation/devicetree/bindings/memory-controllers/synopsys.txt

 Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
 
-This controller has an optional ECC support in half-bus width (16-bit)
-configuration. The ECC controller corrects one bit error and detects
-two bit errors.
+The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit
+bus width configurations.
+
+The Zynq DDR ECC controller has an optional ECC support in half-bus width
+(16-bit) configuration.
+
+These both ECC controllers correct single bit ECC errors and detect double bit
+ECC errors.
 
 Required properties:
- - compatible: Should be 'xlnx,zynq-ddrc-a05'
- - reg: Base address and size of the controllers memory area
+ - compatible: One of:
+	- 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller
+	- 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller
+ - reg: Should contain DDR controller registers location and length.
+
+Required properties for "xlnx,zynqmp-ddrc-2.40a":
+ - interrupts: Property with a value describing the interrupt number.
 
 Example:
 	memory-controller@f8006000 {
 		compatible = "xlnx,zynq-ddrc-a05";
 		reg = <0xf8006000 0x1000>;
 	};
+
+	mc: memory-controller@fd070000 {
+		compatible = "xlnx,zynqmp-ddrc-2.40a";
+		reg = <0x0 0xfd070000 0x0 0x30000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 112 4>;
+	};

MAINTAINERS

@@ -5445,7 +5445,6 @@ S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
 
 EDAC-I82975X
-M:	Ranganathan Desikan <ravi@jetztechnologies.com>
 M:	"Arvind R." <arvino55@gmail.com>
 L:	linux-edac@vger.kernel.org
 S:	Maintained

drivers/edac/Kconfig

@@ -231,10 +231,10 @@ config EDAC_SBRIDGE
 
 config EDAC_SKX
 	tristate "Intel Skylake server Integrated MC"
-	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
+	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI
 	depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y
 	select DMI
-	select ACPI_ADXL if ACPI
+	select ACPI_ADXL
 	help
 	  Support for error detection and correction the Intel
 	  Skylake server Integrated Memory Controllers. If your
@@ -442,7 +442,7 @@ config EDAC_ALTERA_SDMMC
 
 config EDAC_SYNOPSYS
 	tristate "Synopsys DDR Memory Controller"
-	depends on ARCH_ZYNQ
+	depends on ARCH_ZYNQ || ARCH_ZYNQMP
 	help
 	  Support for error detection and correction on the Synopsys DDR
 	  memory controller.

drivers/edac/e752x_edac.c

@@ -1446,8 +1446,8 @@ static int __init e752x_init(void)
 
 	edac_dbg(3, "\n");
 
-       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
-       opstate_init();
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
 
 	pci_rc = pci_register_driver(&e752x_driver);
 	return (pci_rc < 0) ? pci_rc : 0;

drivers/edac/edac_mc.c

@@ -55,8 +55,6 @@ static LIST_HEAD(mc_devices);
  */
 static const char *edac_mc_owner;
 
-static struct bus_type mc_bus[EDAC_MAX_MCS];
-
 int edac_get_report_status(void)
 {
 	return edac_report;
@@ -716,11 +714,6 @@ int edac_mc_add_mc_with_groups(struct mem_ctl_info *mci,
 	int ret = -EINVAL;
 	edac_dbg(0, "\n");
 
-	if (mci->mc_idx >= EDAC_MAX_MCS) {
-		pr_warn_once("Too many memory controllers: %d\n", mci->mc_idx);
-		return -ENODEV;
-	}
-
 #ifdef CONFIG_EDAC_DEBUG
 	if (edac_debug_level >= 3)
 		edac_mc_dump_mci(mci);
@@ -760,7 +753,7 @@ int edac_mc_add_mc_with_groups(struct mem_ctl_info *mci,
 	/* set load time so that error rate can be tracked */
 	mci->start_time = jiffies;
 
-	mci->bus = &mc_bus[mci->mc_idx];
+	mci->bus = edac_get_sysfs_subsys();
 
 	if (edac_create_sysfs_mci_device(mci, groups)) {
 		edac_mc_printk(mci, KERN_WARNING,

drivers/edac/edac_mc_sysfs.c

@@ -405,7 +405,6 @@ static int edac_create_csrow_object(struct mem_ctl_info *mci,
 				    struct csrow_info *csrow, int index)
 {
 	csrow->dev.type = &csrow_attr_type;
-	csrow->dev.bus = mci->bus;
 	csrow->dev.groups = csrow_dev_groups;
 	device_initialize(&csrow->dev);
 	csrow->dev.parent = &mci->dev;
@@ -636,7 +635,6 @@ static int edac_create_dimm_object(struct mem_ctl_info *mci,
 	dimm->mci = mci;
 
 	dimm->dev.type = &dimm_attr_type;
-	dimm->dev.bus = mci->bus;
 	device_initialize(&dimm->dev);
 
 	dimm->dev.parent = &mci->dev;
@@ -914,33 +912,13 @@ static const struct device_type mci_attr_type = {
 int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
 				 const struct attribute_group **groups)
 {
-	char *name;
 	int i, err;
 
-	/*
-	 * The memory controller needs its own bus, in order to avoid
-	 * namespace conflicts at /sys/bus/edac.
-	 */
-	name = kasprintf(GFP_KERNEL, "mc%d", mci->mc_idx);
-	if (!name)
-		return -ENOMEM;
-
-	mci->bus->name = name;
-
-	edac_dbg(0, "creating bus %s\n", mci->bus->name);
-
-	err = bus_register(mci->bus);
-	if (err < 0) {
-		kfree(name);
-		return err;
-	}
-
 	/* get the /sys/devices/system/edac subsys reference */
 	mci->dev.type = &mci_attr_type;
 	device_initialize(&mci->dev);
 
 	mci->dev.parent = mci_pdev;
-	mci->dev.bus = mci->bus;
 	mci->dev.groups = groups;
 	dev_set_name(&mci->dev, "mc%d", mci->mc_idx);
 	dev_set_drvdata(&mci->dev, mci);
@@ -950,7 +928,7 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
 	err = device_add(&mci->dev);
 	if (err < 0) {
 		edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
-		goto fail_unregister_bus;
+		goto out;
 	}
 
 	/*
@@ -998,10 +976,8 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
 		device_unregister(&dimm->dev);
 	}
 	device_unregister(&mci->dev);
-fail_unregister_bus:
-	bus_unregister(mci->bus);
-	kfree(name);
 
+out:
 	return err;
 }
 
@@ -1032,13 +1008,8 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 
 void edac_unregister_sysfs(struct mem_ctl_info *mci)
 {
-	struct bus_type *bus = mci->bus;
-	const char *name = mci->bus->name;
-
 	edac_dbg(1, "Unregistering device %s\n", dev_name(&mci->dev));
 	device_unregister(&mci->dev);
-	bus_unregister(bus);
-	kfree(name);
 }
 
 static void mc_attr_release(struct device *dev)

drivers/edac/fsl_ddr_edac.c

@@ -2,8 +2,8 @@
  * Freescale Memory Controller kernel module
  *
  * Support Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
- * ARM-based Layerscape SoCs including LS2xxx. Originally split
- * out from mpc85xx_edac EDAC driver.
+ * ARM-based Layerscape SoCs including LS2xxx and LS1021A. Originally
+ * split out from mpc85xx_edac EDAC driver.
  *
  * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc.
  *
@@ -51,6 +51,7 @@ static inline void ddr_out32(void __iomem *addr, u32 value)
 		iowrite32be(value, addr);
 }
 
+#ifdef CONFIG_EDAC_DEBUG
 /************************ MC SYSFS parts ***********************************/
 
 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
@@ -151,11 +152,14 @@ static DEVICE_ATTR(inject_data_lo, S_IRUGO | S_IWUSR,
 		   fsl_mc_inject_data_lo_show, fsl_mc_inject_data_lo_store);
 static DEVICE_ATTR(inject_ctrl, S_IRUGO | S_IWUSR,
 		   fsl_mc_inject_ctrl_show, fsl_mc_inject_ctrl_store);
+#endif /* CONFIG_EDAC_DEBUG */
 
 static struct attribute *fsl_ddr_dev_attrs[] = {
+#ifdef CONFIG_EDAC_DEBUG
 	&dev_attr_inject_data_hi.attr,
 	&dev_attr_inject_data_lo.attr,
 	&dev_attr_inject_ctrl.attr,
+#endif
 	NULL
 };
 

drivers/edac/fsl_ddr_edac.h

@@ -2,8 +2,8 @@
  * Freescale Memory Controller kernel module
  *
  * Support  Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
- * ARM-based Layerscape SoCs including LS2xxx. Originally split
- * out from mpc85xx_edac EDAC driver.
+ * ARM-based Layerscape SoCs including LS2xxx and LS1021A. Originally
+ * split out from mpc85xx_edac EDAC driver.
  *
  * Author: Dave Jiang <djiang@mvista.com>
  *

drivers/edac/i3000_edac.c

@@ -508,8 +508,8 @@ static int __init i3000_init(void)
 
 	edac_dbg(3, "MC:\n");
 
-       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
-       opstate_init();
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
 
 	pci_rc = pci_register_driver(&i3000_driver);
 	if (pci_rc < 0)

drivers/edac/i5000_edac.c

@@ -1134,8 +1134,6 @@ static void i5000_get_mc_regs(struct mem_ctl_info *mci)
 	u32 actual_tolm;
 	u16 limit;
 	int slot_row;
-	int maxch;
-	int maxdimmperch;
 	int way0, way1;
 
 	pvt = mci->pvt_info;
@@ -1145,9 +1143,6 @@ static void i5000_get_mc_regs(struct mem_ctl_info *mci)
 	pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32),
 			&pvt->u.ambase_top);
 
-	maxdimmperch = pvt->maxdimmperch;
-	maxch = pvt->maxch;
-
 	edac_dbg(2, "AMBASE= 0x%lx  MAXCH= %d  MAX-DIMM-Per-CH= %d\n",
 		 (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch);
 
@@ -1253,7 +1248,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
 {
 	struct i5000_pvt *pvt;
 	struct dimm_info *dimm;
-	int empty, channel_count;
+	int empty;
 	int max_csrows;
 	int mtr;
 	int csrow_megs;
@@ -1261,8 +1256,6 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
 	int slot;
 
 	pvt = mci->pvt_info;
-
-	channel_count = pvt->maxch;
 	max_csrows = pvt->maxdimmperch * 2;
 
 	empty = 1;		/* Assume NO memory */
@@ -1559,8 +1552,8 @@ static int __init i5000_init(void)
 
 	edac_dbg(2, "MC:\n");
 
-       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
-       opstate_init();
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
 
 	pci_rc = pci_register_driver(&i5000_driver);
 

drivers/edac/i7core_edac.c

@@ -724,7 +724,7 @@ static ssize_t i7core_inject_type_store(struct device *dev,
 					const char *data, size_t count)
 {
 	struct mem_ctl_info *mci = to_mci(dev);
-struct i7core_pvt *pvt = mci->pvt_info;
+	struct i7core_pvt *pvt = mci->pvt_info;
 	unsigned long value;
 	int rc;
 

drivers/edac/i82975x_edac.c

@@ -104,7 +104,7 @@ NOTE: Only ONE of the three must be enabled
 					 *
 					 * 31:14 Base Addr of 16K memory-mapped
 					 *	configuration space
-					 * 13:1  reserverd
+					 * 13:1  reserved
 					 *  0    mem-mapped config space enable
 					 */
 
@@ -358,14 +358,6 @@ static int dual_channel_active(void __iomem *mch_window)
 	return dualch;
 }
 
-static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
-{
-	/*
-	 * ECC is possible on i92975x ONLY with DEV_X8
-	 */
-	return DEV_X8;
-}
-
 static void i82975x_init_csrows(struct mem_ctl_info *mci,
 		struct pci_dev *pdev, void __iomem *mch_window)
 {
@@ -375,7 +367,6 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci,
 	u32 cumul_size, nr_pages;
 	int index, chan;
 	struct dimm_info *dimm;
-	enum dev_type dtype;
 
 	last_cumul_size = 0;
 
@@ -413,7 +404,6 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci,
 		 *   [0-7] for single-channel; i.e. csrow->nr_channels = 1
 		 *   [0-3] for dual-channel; i.e. csrow->nr_channels = 2
 		 */
-		dtype = i82975x_dram_type(mch_window, index);
 		for (chan = 0; chan < csrow->nr_channels; chan++) {
 			dimm = mci->csrows[index]->channels[chan]->dimm;
 
@@ -423,7 +413,10 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci,
 				 (chan == 0) ? 'A' : 'B',
 				 index);
 			dimm->grain = 1 << 7;	/* 128Byte cache-line resolution */
-			dimm->dtype = i82975x_dram_type(mch_window, index);
+
+			/* ECC is possible on i92975x ONLY with DEV_X8.  */
+			dimm->dtype = DEV_X8;
+
 			dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */
 			dimm->edac_mode = EDAC_SECDED; /* only supported */
 		}
@@ -655,8 +648,8 @@ static int __init i82975x_init(void)
 
 	edac_dbg(3, "\n");
 
-       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
-       opstate_init();
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
 
 	pci_rc = pci_register_driver(&i82975x_driver);
 	if (pci_rc < 0)

drivers/edac/qcom_edac.c

@@ -292,7 +292,6 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl)
 	struct llcc_drv_data *drv = edac_dev_ctl->pvt_info;
 	irqreturn_t irq_rc = IRQ_NONE;
 	u32 drp_error, trp_error, i;
-	bool irq_handled;
 	int ret;
 
 	/* Iterate over the banks and look for Tag RAM or Data RAM errors */
@@ -311,7 +310,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl)
 			ret = dump_syn_reg(edev_ctl, LLCC_DRAM_UE, i);
 		}
 		if (!ret)
-			irq_handled = true;
+			irq_rc = IRQ_HANDLED;
 
 		ret = regmap_read(drv->regmap,
 				  drv->offsets[i] + TRP_INTERRUPT_0_STATUS,
@@ -327,12 +326,9 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl)
 			ret = dump_syn_reg(edev_ctl, LLCC_TRAM_UE, i);
 		}
 		if (!ret)
-			irq_handled = true;
+			irq_rc = IRQ_HANDLED;
 	}
 
-	if (irq_handled)
-		irq_rc = IRQ_HANDLED;
-
 	return irq_rc;
 }
 

drivers/edac/skx_edac.c

@@ -209,7 +209,7 @@ static int get_all_bus_mappings(void)
 		d->bus[1] =  GET_BITFIELD(reg, 8, 15);
 		d->bus[2] =  GET_BITFIELD(reg, 16, 23);
 		d->bus[3] =  GET_BITFIELD(reg, 24, 31);
-		edac_dbg(2, "busses: %x, %x, %x, %x\n",
+		edac_dbg(2, "busses: 0x%x, 0x%x, 0x%x, 0x%x\n",
 			 d->bus[0], d->bus[1], d->bus[2], d->bus[3]);
 		list_add_tail(&d->list, &skx_edac_list);
 		skx_num_sockets++;
@@ -245,8 +245,8 @@ static int get_all_munits(const struct munit *m)
 
 		/* Be sure that the device is enabled */
 		if (unlikely(pci_enable_device(pdev) < 0)) {
-			skx_printk(KERN_ERR,
-				"Couldn't enable %04x:%04x\n", PCI_VENDOR_ID_INTEL, m->did);
+			skx_printk(KERN_ERR, "Couldn't enable device %04x:%04x\n",
+				   PCI_VENDOR_ID_INTEL, m->did);
 			goto fail;
 		}
 
@@ -323,7 +323,7 @@ static int get_dimm_attr(u32 reg, int lobit, int hibit, int add, int minval,
 	u32 val = GET_BITFIELD(reg, lobit, hibit);
 
 	if (val < minval || val > maxval) {
-		edac_dbg(2, "bad %s = %d (raw=%x)\n", name, val, reg);
+		edac_dbg(2, "bad %s = %d (raw=0x%x)\n", name, val, reg);
 		return -EINVAL;
 	}
 	return val + add;
@@ -368,7 +368,7 @@ static int skx_get_hi_lo(void)
 	skx_tohm |= (u64)reg << 32;
 
 	pci_dev_put(pdev);
-	edac_dbg(2, "tolm=%llx tohm=%llx\n", skx_tolm, skx_tohm);
+	edac_dbg(2, "tolm=0x%llx tohm=0x%llx\n", skx_tolm, skx_tohm);
 
 	return 0;
 }
@@ -389,7 +389,7 @@ static int get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
 	size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
 	npages = MiB_TO_PAGES(size);
 
-	edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+	edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: 0x%#x, col: 0x%#x\n",
 		 imc->mc, chan, dimmno, size, npages,
 		 banks, 1 << ranks, rows, cols);
 
@@ -430,18 +430,18 @@ static int get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
 	}
 
 	if (smbios_handle < 0) {
-		skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=%x\n", dev_handle);
+		skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=0x%x\n", dev_handle);
 		goto unknown_size;
 	}
 
 	if (flags & ACPI_NFIT_MEM_MAP_FAILED) {
-		skx_printk(KERN_ERR, "NVDIMM ADR=%x is not mapped\n", dev_handle);
+		skx_printk(KERN_ERR, "NVDIMM ADR=0x%x is not mapped\n", dev_handle);
 		goto unknown_size;
 	}
 
 	size = dmi_memdev_size(smbios_handle);
 	if (size == ~0ull)
-		skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=%x/SMBIOS=%x\n",
+		skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=0x%x/SMBIOS=0x%x\n",
 			   dev_handle, smbios_handle);
 
 unknown_size:
@@ -616,7 +616,7 @@ static bool skx_sad_decode(struct decoded_addr *res)
 
 	/* Simple sanity check for I/O space or out of range */
 	if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) {
-		edac_dbg(0, "Address %llx out of range\n", addr);
+		edac_dbg(0, "Address 0x%llx out of range\n", addr);
 		return false;
 	}
 
@@ -631,7 +631,7 @@ static bool skx_sad_decode(struct decoded_addr *res)
 		}
 		prev_limit = limit + 1;
 	}
-	edac_dbg(0, "No SAD entry for %llx\n", addr);
+	edac_dbg(0, "No SAD entry for 0x%llx\n", addr);
 	return false;
 
 sad_found:
@@ -709,7 +709,7 @@ static bool skx_sad_decode(struct decoded_addr *res)
 	res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2);
 	res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19);
 
-	edac_dbg(2, "%llx: socket=%d imc=%d channel=%d\n",
+	edac_dbg(2, "0x%llx: socket=%d imc=%d channel=%d\n",
 		 res->addr, res->socket, res->imc, res->channel);
 	return true;
 }
@@ -756,7 +756,7 @@ static bool skx_tad_decode(struct decoded_addr *res)
 		if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness))
 			goto tad_found;
 	}
-	edac_dbg(0, "No TAD entry for %llx\n", res->addr);
+	edac_dbg(0, "No TAD entry for 0x%llx\n", res->addr);
 	return false;
 
 tad_found:
@@ -784,7 +784,7 @@ static bool skx_tad_decode(struct decoded_addr *res)
 
 	res->chan_addr = channel_addr;
 
-	edac_dbg(2, "%llx: chan_addr=%llx sktways=%d chanways=%d\n",
+	edac_dbg(2, "0x%llx: chan_addr=0x%llx sktways=%d chanways=%d\n",
 		 res->addr, res->chan_addr, res->sktways, res->chanways);
 	return true;
 }
@@ -826,7 +826,7 @@ static bool skx_rir_decode(struct decoded_addr *res)
 		}
 		prev_limit = limit;
 	}
-	edac_dbg(0, "No RIR entry for %llx\n", res->addr);
+	edac_dbg(0, "No RIR entry for 0x%llx\n", res->addr);
 	return false;
 
 rir_found:
@@ -845,7 +845,7 @@ static bool skx_rir_decode(struct decoded_addr *res)
 	res->dimm = chan_rank / 4;
 	res->rank = chan_rank % 4;
 
-	edac_dbg(2, "%llx: dimm=%d rank=%d chan_rank=%d rank_addr=%llx\n",
+	edac_dbg(2, "0x%llx: dimm=%d rank=%d chan_rank=%d rank_addr=0x%llx\n",
 		 res->addr, res->dimm, res->rank,
 		 res->channel_rank, res->rank_address);
 	return true;
@@ -908,7 +908,7 @@ static bool skx_mad_decode(struct decoded_addr *r)
 	}
 	r->row &= (1u << dimm->rowbits) - 1;
 
-	edac_dbg(2, "%llx: row=%x col=%x bank_addr=%d bank_group=%d\n",
+	edac_dbg(2, "0x%llx: row=0x%x col=0x%x bank_addr=%d bank_group=%d\n",
 		 r->addr, r->row, r->column, r->bank_address,
 		 r->bank_group);
 	return true;
@@ -921,53 +921,6 @@ static bool skx_decode(struct decoded_addr *res)
 		skx_rir_decode(res) && skx_mad_decode(res);
 }
 
-#ifdef CONFIG_EDAC_DEBUG
-/*
- * Debug feature. Make /sys/kernel/debug/skx_edac_test/addr.
- * Write an address to this file to exercise the address decode
- * logic in this driver.
- */
-static struct dentry *skx_test;
-static u64 skx_fake_addr;
-
-static int debugfs_u64_set(void *data, u64 val)
-{
-	struct decoded_addr res;
-
-	res.addr = val;
-	skx_decode(&res);
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
-
-static struct dentry *mydebugfs_create(const char *name, umode_t mode,
-				       struct dentry *parent, u64 *value)
-{
-	return debugfs_create_file(name, mode, parent, value, &fops_u64_wo);
-}
-
-static void setup_skx_debug(void)
-{
-	skx_test = debugfs_create_dir("skx_edac_test", NULL);
-	mydebugfs_create("addr", S_IWUSR, skx_test, &skx_fake_addr);
-}
-
-static void teardown_skx_debug(void)
-{
-	debugfs_remove_recursive(skx_test);
-}
-#else
-static void setup_skx_debug(void)
-{
-}
-
-static void teardown_skx_debug(void)
-{
-}
-#endif /*CONFIG_EDAC_DEBUG*/
-
 static bool skx_adxl_decode(struct decoded_addr *res)
 
 {
@@ -1069,13 +1022,13 @@ static void skx_mce_output_error(struct mem_ctl_info *mci,
 		}
 	}
 	if (adxl_component_count) {
-		snprintf(skx_msg, MSG_SIZE, "%s%s err_code:%04x:%04x %s",
+		snprintf(skx_msg, MSG_SIZE, "%s%s err_code:0x%04x:0x%04x %s",
 			 overflow ? " OVERFLOW" : "",
 			 (uncorrected_error && recoverable) ? " recoverable" : "",
 			 mscod, errcode, adxl_msg);
 	} else {
 		snprintf(skx_msg, MSG_SIZE,
-			 "%s%s err_code:%04x:%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:%x col:%x",
+			 "%s%s err_code:0x%04x:0x%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:0x%x col:0x%x",
 			 overflow ? " OVERFLOW" : "",
 			 (uncorrected_error && recoverable) ? " recoverable" : "",
 			 mscod, errcode,
@@ -1151,15 +1104,15 @@ static int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
 
 	skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n");
 
-	skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: %Lx "
+	skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: 0x%llx "
 			  "Bank %d: %016Lx\n", mce->extcpu, type,
 			  mce->mcgstatus, mce->bank, mce->status);
-	skx_mc_printk(mci, KERN_DEBUG, "TSC %llx ", mce->tsc);
-	skx_mc_printk(mci, KERN_DEBUG, "ADDR %llx ", mce->addr);
-	skx_mc_printk(mci, KERN_DEBUG, "MISC %llx ", mce->misc);
+	skx_mc_printk(mci, KERN_DEBUG, "TSC 0x%llx ", mce->tsc);
+	skx_mc_printk(mci, KERN_DEBUG, "ADDR 0x%llx ", mce->addr);
+	skx_mc_printk(mci, KERN_DEBUG, "MISC 0x%llx ", mce->misc);
 
-	skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:%x TIME %llu SOCKET "
-			  "%u APIC %x\n", mce->cpuvendor, mce->cpuid,
+	skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:0x%x TIME %llu SOCKET "
+			  "%u APIC 0x%x\n", mce->cpuvendor, mce->cpuid,
 			  mce->time, mce->socketid, mce->apicid);
 
 	skx_mce_output_error(mci, mce, &res);
@@ -1172,6 +1125,54 @@ static struct notifier_block skx_mce_dec = {
 	.priority	= MCE_PRIO_EDAC,
 };
 
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Debug feature.
+ * Exercise the address decode logic by writing an address to
+ * /sys/kernel/debug/edac/skx_test/addr.
+ */
+static struct dentry *skx_test;
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+	struct mce m;
+
+	pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
+
+	memset(&m, 0, sizeof(m));
+	/* ADDRV + MemRd + Unknown channel */
+	m.status = MCI_STATUS_ADDRV + 0x90;
+	/* One corrected error */
+	m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
+	m.addr = val;
+	skx_mce_check_error(NULL, 0, &m);
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static void setup_skx_debug(void)
+{
+	skx_test = edac_debugfs_create_dir("skx_test");
+	if (!skx_test)
+		return;
+
+	if (!edac_debugfs_create_file("addr", 0200, skx_test,
+				      NULL, &fops_u64_wo)) {
+		debugfs_remove(skx_test);
+		skx_test = NULL;
+	}
+}
+
+static void teardown_skx_debug(void)
+{
+	debugfs_remove_recursive(skx_test);
+}
+#else
+static void setup_skx_debug(void) {}
+static void teardown_skx_debug(void) {}
+#endif /*CONFIG_EDAC_DEBUG*/
+
 static void skx_remove(void)
 {
 	int i, j;
@@ -1291,7 +1292,7 @@ static int __init skx_init(void)
 		if (rc < 0)
 			goto fail;
 		if (rc != m->per_socket * skx_num_sockets) {
-			edac_dbg(2, "Expected %d, got %d of %x\n",
+			edac_dbg(2, "Expected %d, got %d of 0x%x\n",
 				 m->per_socket * skx_num_sockets, rc, m->did);
 			rc = -ENODEV;
 			goto fail;
@@ -1339,11 +1340,11 @@ static void __exit skx_exit(void)
 {
 	edac_dbg(2, "\n");
 	mce_unregister_decode_chain(&skx_mce_dec);
-	skx_remove();
+	teardown_skx_debug();
 	if (nvdimm_count)
 		skx_adxl_put();
 	kfree(skx_msg);
-	teardown_skx_debug();
+	skx_remove();
 }
 
 module_init(skx_init);

include/linux/adxl.h

@@ -7,12 +7,7 @@
 #ifndef _LINUX_ADXL_H
 #define _LINUX_ADXL_H
 
-#ifdef CONFIG_ACPI_ADXL
 const char * const *adxl_get_component_names(void);
 int adxl_decode(u64 addr, u64 component_values[]);
-#else
-static inline const char * const *adxl_get_component_names(void)  { return NULL; }
-static inline int adxl_decode(u64 addr, u64 component_values[])   { return  -EOPNOTSUPP; }
-#endif
 
 #endif /* _LINUX_ADXL_H */

include/linux/edac.h

@@ -669,10 +669,4 @@ struct mem_ctl_info {
 	bool fake_inject_ue;
 	u16 fake_inject_count;
 };
-
-/*
- * Maximum number of memory controllers in the coherent fabric.
- */
-#define EDAC_MAX_MCS	2 * MAX_NUMNODES
-
 #endif