Merge tag 'samsung-dt' of...

Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "1st Round of Samsung DT updates for v3.19" from Kukjin Kim:

Samsung DT updates for v3.19

- add CPU nodes for exynos4210, exynos4212, exynos4412

- exynos4x12-pinctrl: add utility macro to define pin sleep states
- exynos4412-trats2: add Maxim77693 PMIC node, add sleep mode pin
  configuration and keep eMMC regulators soft-disabled

- add new exynos5250-spring DT

- cleanup exynos5250-arndale, exynos5250-smdk5250 and exynos5250-snow

- exynos5250-arndale: fix apparent GPIO typo and simplify USB3503
- exynos5250-snow and exynos Peach boards: add rtc_src clock for RTC

- correct mmc0 capability string exynos5420-peach-pit and exynos5800-
  peach-pi

- exynos3250: add MFC codec nodes

- s3c64xx: enable PWM node by default

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add CPU nodes for Exynos4 SoCs
  ARM: dts: add MFC codec device node for exynos3250
  ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2
  ARM: dts: Add sleep mode pin configuration for exynos4412-trats2
  ARM: dts: Add utility macro to define pin sleep states for exynos4x12-pinctrl
  ARM: dts: Keep eMMC regulators soft-disabled for exynos4412-trats2
  ARM: dts: correct the mmc0 capability string for exynos Peach boards
  ARM: dts: Add rtc_src clk for s3c-rtc on exynos5250-snow
  ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards
  ARM: dts: Enable PWM node by default for s3c64xx
  ARM: dts: Add exynos5250-spring device tree
  ARM: dts: Simplify USB3503 on exynos5250-arndale
  ARM: dts: Fix apparent GPIO typo in exynos5250-arndale
  ARM: dts: Clean up exynos5250-arndale
  ARM: dts: Clean up exynos5250-smdk5250
  ARM: dts: Fill in bootargs for exynos5250-snow
  ARM: dts: Clean up exynos5250-snow
  ARM: dts: Prepare node labels for exynos5250
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
 	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \

arch/arm/boot/dts/exynos3250.dtsi

@@ -320,6 +320,16 @@ adc: adc@126C0000 {
 			status = "disabled";
 		};
 
+		mfc: codec@13400000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x13400000 0x10000>;
+			interrupts = <0 102 0>;
+			clock-names = "mfc", "sclk_mfc";
+			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
+			samsung,power-domain = <&pd_mfc>;
+			status = "disabled";
+		};
+
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13800000 0x100>;

arch/arm/boot/dts/exynos4210.dtsi

@@ -31,6 +31,23 @@ aliases {
 		pinctrl2 = &pinctrl_2;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@900 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x900>;
+		};
+
+		cpu@901 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x901>;
+		};
+	};
+
 	pmu_system_controller: system-controller@10020000 {
 		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 				"clkout4", "clkout8", "clkout9";

arch/arm/boot/dts/exynos4212.dtsi

@@ -22,6 +22,23 @@
 / {
 	compatible = "samsung,exynos4212", "samsung,exynos4";
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@A00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA00>;
+		};
+
+		cpu@A01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA01>;
+		};
+	};
+
 	combiner: interrupt-controller@10440000 {
 		samsung,combiner-nr = <18>;
 	};

arch/arm/boot/dts/exynos4412.dtsi

@@ -22,6 +22,35 @@
 / {
 	compatible = "samsung,exynos4412", "samsung,exynos4";
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@A00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA00>;
+		};
+
+		cpu@A01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA01>;
+		};
+
+		cpu@A02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA02>;
+		};
+
+		cpu@A03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA03>;
+		};
+	};
+
 	combiner: interrupt-controller@10440000 {
 		samsung,combiner-nr = <20>;
 	};

arch/arm/boot/dts/exynos4x12-pinctrl.dtsi

@@ -12,6 +12,22 @@
  * published by the Free Software Foundation.
 */
 
+#define PIN_PULL_NONE		0
+#define PIN_PULL_DOWN		1
+#define PIN_PULL_UP		3
+
+#define PIN_PDN_OUT0		0
+#define PIN_PDN_OUT1		1
+#define PIN_PDN_INPUT		2
+#define PIN_PDN_PREV		3
+
+#define PIN_SLP(_pin, _mode, _pull)				\
+	_pin {							\
+		samsung,pins = #_pin;				\
+		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+	}
+
 / {
 	pinctrl@11400000 {
 		gpa0: gpa0 {

arch/arm/boot/dts/exynos5250-snow.dts

@@ -6,10 +6,13 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 #include "exynos5250.dtsi"
 
 / {
@@ -25,76 +28,7 @@ memory {
 	};
 
 	chosen {
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	pinctrl@11400000 {
-		ec_irq: ec-irq {
-			samsung,pins = "gpx1-6";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pin-drv = <0>;
-		};
-
-		max98095_en: max98095-en {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		tps65090_irq: tps65090-irq {
-			samsung,pins = "gpx2-6";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		usb3_vbus_en: usb3-vbus-en {
-			samsung,pins = "gpx2-7";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		hdmi_hpd_irq: hdmi-hpd-irq {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		arb_their_claim: arb-their-claim {
-			samsung,pins = "gpe0-4";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		arb_our_claim: arb-our-claim {
-			samsung,pins = "gpf0-3";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+		bootargs = "console=tty1";
 	};
 
 	gpio-keys {
@@ -102,14 +36,14 @@ gpio-keys {
 
 		power {
 			label = "Power";
-			gpios = <&gpx1 3 1>;
-			linux,code = <116>; /* KEY_POWER */
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
 			gpio-key,wakeup;
 		};
 
 		lid-switch {
 			label = "Lid";
-			gpios = <&gpx3 5 1>;
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
@@ -130,8 +64,8 @@ i2c-arbitrator {
 
 		i2c-parent = <&{/i2c@12CA0000}>;
 
-		our-claim-gpio = <&gpf0 3 1>;
-		their-claim-gpios = <&gpe0 4 1>;
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
 		slew-delay-us = <10>;
 		wait-retry-us = <3000>;
 		wait-free-us = <50000>;
@@ -154,7 +88,7 @@ battery: sbs-battery@b {
 			cros_ec: embedded-controller {
 				compatible = "google,cros-ec-i2c";
 				reg = <0x1e>;
-				interrupts = <6 0>;
+				interrupts = <6 IRQ_TYPE_NONE>;
 				interrupt-parent = <&gpx1>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&ec_irq>;
@@ -241,13 +175,6 @@ charger {
 	};
 
 	i2c@12CD0000 {
-		max98095: codec@11 {
-			compatible = "maxim,max98095";
-			reg = <0x11>;
-			pinctrl-0 = <&max98095_en>;
-			pinctrl-names = "default";
-		};
-
 		ptn3460: lvds-bridge@20 {
 			compatible = "nxp,ptn3460";
 			reg = <0x20>;
@@ -258,10 +185,6 @@ ptn3460: lvds-bridge@20 {
 		};
 	};
 
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
 	sound {
 		compatible = "google,snow-audio-max98095";
 
@@ -275,20 +198,12 @@ usb3_vbus_reg: regulator-usb3 {
 		regulator-name = "P5.0V_USB3CON";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 0>;
+		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb3_vbus_en>;
 		enable-active-high;
 	};
 
-	phy@12100000 {
-		vbus-supply = <&usb3_vbus_reg>;
-	};
-
-	usb@12110000 {
-		samsung,vbus-gpio = <&gpx1 1 0>;
-	};
-
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -296,18 +211,6 @@ xxti {
 		};
 	};
 
-	hdmi {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_irq>;
-		phy = <&hdmiphy>;
-		ddc = <&i2c_2>;
-		hdmi-en-supply = <&tps65090_fet7>;
-		vdd-supply = <&ldo8_reg>;
-		vdd_osc-supply = <&ldo10_reg>;
-		vdd_pll-supply = <&ldo8_reg>;
-	};
-
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 1000000 0>;
@@ -319,30 +222,46 @@ backlight: backlight {
 		pinctrl-names = "default";
 	};
 
-	fimd@14400000 {
-		status = "okay";
-		samsung,invert-vclk;
-	};
-
 	panel: panel {
 		compatible = "auo,b116xw03";
 		power-supply = <&fet6>;
 		backlight = <&backlight>;
 	};
+};
 
-	dp-controller@145B0000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <2>;
-		samsung,hpd-gpio = <&gpx0 7 0>;
-		bridge = <&ptn3460>;
-	};
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+	bridge = <&ptn3460>;
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	phy = <&hdmiphy>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -350,10 +269,10 @@ &i2c_0 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <378000>;
 
-	max77686@09 {
+	max77686: max77686@09 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 0>;
+		interrupts = <2 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
@@ -503,7 +422,7 @@ &i2c_1 {
 	trackpad {
 		reg = <0x67>;
 		compatible = "cypress,cyapa";
-		interrupts = <2 0>;
+		interrupts = <2 IRQ_TYPE_NONE>;
 		interrupt-parent = <&gpx1>;
 		wakeup-source;
 	};
@@ -550,6 +469,13 @@ &i2c_7 {
 	status = "okay";
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
+
+	max98095: codec@11 {
+		compatible = "maxim,max98095";
+		reg = <0x11>;
+		pinctrl-0 = <&max98095_en>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c_8 {
@@ -563,6 +489,10 @@ hdmiphy: hdmiphy@38 {
 	};
 };
 
+&i2s0 {
+	status = "okay";
+};
+
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -587,7 +517,7 @@ &mmc_2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 	bus-width = <4>;
-	wp-gpios = <&gpc2 1 0>;
+	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
 	cap-sd-highspeed;
 };
 
@@ -610,12 +540,82 @@ &mmc_3 {
 };
 
 &pinctrl_0 {
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	max98095_en: max98095-en {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus_en: usb3-vbus-en {
+		samsung,pins = "gpx2-7";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <0>;
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	arb_their_claim: arb-their-claim {
+		samsung,pins = "gpe0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	arb_our_claim: arb-our-claim {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+	samsung,pin-pud = <3>;
+	samsung,pin-drv = <0>;
 };
 
 &spi_1 {
@@ -624,4 +624,8 @@ &spi_1 {
 	num-cs = <1>;
 };
 
+&usbdrd_phy {
+	vbus-supply = <&usb3_vbus_reg>;
+};
+
 #include "cros-ec-keyboard.dtsi"

arch/arm/boot/dts/exynos5250.dtsi

@@ -218,7 +218,7 @@ g2d@10850000 {
 		clock-names = "fimg2d";
 	};
 
-	codec@11000000 {
+	mfc: codec@11000000 {
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
@@ -227,7 +227,7 @@ codec@11000000 {
 		clock-names = "mfc";
 	};
 
-	rtc@101E0000 {
+	rtc: rtc@101E0000 {
 		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
@@ -261,7 +261,7 @@ serial@12C30000 {
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	sata@122F0000 {
+	sata: sata@122F0000 {
 		compatible = "snps,dwc-ahci";
 		samsung,sata-freq = <66>;
 		reg = <0x122F0000 0x1ff>;
@@ -573,7 +573,7 @@ usbdrd_phy: phy@12100000 {
 		#phy-cells = <1>;
 	};
 
-	usb@12110000 {
+	ehci: usb@12110000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12110000 0x100>;
 		interrupts = <0 71 0>;
@@ -588,7 +588,7 @@ port@0 {
 		};
 	};
 
-	usb@12120000 {
+	ohci: usb@12120000 {
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12120000 0x100>;
 		interrupts = <0 71 0>;
@@ -710,7 +710,7 @@ gsc_3:  gsc@13e30000 {
 		clock-names = "gscl";
 	};
 
-	hdmi {
+	hdmi: hdmi {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
@@ -736,14 +736,14 @@ dp_phy: video-phy@10040720 {
 		#phy-cells = <0>;
 	};
 
-	dp-controller@145B0000 {
+	dp: dp-controller@145B0000 {
 		clocks = <&clock CLK_DP>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
 	};
 
-	fimd@14400000 {
+	fimd: fimd@14400000 {
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -12,6 +12,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
 #include "exynos5420.dtsi"
 
 / {
@@ -151,7 +152,7 @@ &hsi2c_4 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	max77802-pmic@9 {
+	max77802: max77802-pmic@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&gpx3>;
 		interrupts = <1 IRQ_TYPE_NONE>;
@@ -560,7 +561,7 @@ &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
 	broken-cd;
-	caps2-mmc-hs200-1_8v;
+	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
 	card-detect-delay = <200>;
@@ -727,6 +728,8 @@ pmic_selb: pmic-selb {
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &spi_2 {

arch/arm/boot/dts/exynos5800-peach-pi.dts

@@ -12,6 +12,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
 #include "exynos5800.dtsi"
 
 / {
@@ -150,7 +151,7 @@ &hsi2c_4 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	max77802-pmic@9 {
+	max77802: max77802-pmic@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&gpx3>;
 		interrupts = <1 IRQ_TYPE_NONE>;
@@ -548,7 +549,7 @@ &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
 	broken-cd;
-	caps2-mmc-hs200-1_8v;
+	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
 	card-detect-delay = <200>;
@@ -715,6 +716,8 @@ pmic_selb: pmic-selb {
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &spi_2 {

arch/arm/boot/dts/s3c6410-mini6410.dts

@@ -198,10 +198,6 @@ &uart3 {
 	status = "okay";
 };
 
-&pwm {
-	status = "okay";
-};
-
 &pinctrl0 {
 	gpio_leds: gpio-leds {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";

arch/arm/boot/dts/s3c64xx.dtsi

@@ -172,7 +172,6 @@ pwm: pwm@7f006000 {
 			clocks = <&clocks PCLK_PWM>;
 			samsung,pwm-outputs = <0>, <1>;
 			#pwm-cells = <3>;
-			status = "disabled";
 		};
 
 		pinctrl0: pinctrl@7f008000 {