Commit b2fadeae authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[BNX2]: Add link-down workaround on 5706 serdes.

In some blade systems using the 5706 serdes, the hardware sometimes
does not properly generate link down interrupts.  We add a workaround
in the driver's timer to force a link-down when some PHY registers
report loss of SYNC.

The parallel detect logic is cleaned up slightly to better integrate
the workaround.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1097f5e9
......@@ -1186,6 +1186,19 @@ bnx2_disable_forced_2g5(struct bnx2 *bp)
bnx2_write_phy(bp, bp->mii_bmcr, bmcr);
}
static void
bnx2_5706s_force_link_dn(struct bnx2 *bp, int start)
{
u32 val;
bnx2_write_phy(bp, MII_BNX2_DSP_ADDRESS, MII_EXPAND_SERDES_CTL);
bnx2_read_phy(bp, MII_BNX2_DSP_RW_PORT, &val);
if (start)
bnx2_write_phy(bp, MII_BNX2_DSP_RW_PORT, val & 0xff0f);
else
bnx2_write_phy(bp, MII_BNX2_DSP_RW_PORT, val | 0xc0);
}
static int
bnx2_set_link(struct bnx2 *bp)
{
......@@ -1211,6 +1224,10 @@ bnx2_set_link(struct bnx2 *bp)
(CHIP_NUM(bp) == CHIP_NUM_5706)) {
u32 val;
if (bp->phy_flags & PHY_FORCED_DOWN_FLAG) {
bnx2_5706s_force_link_dn(bp, 0);
bp->phy_flags &= ~PHY_FORCED_DOWN_FLAG;
}
val = REG_RD(bp, BNX2_EMAC_STATUS);
if (val & BNX2_EMAC_STATUS_LINK)
bmsr |= BMSR_LSTATUS;
......@@ -1239,7 +1256,15 @@ bnx2_set_link(struct bnx2 *bp)
(bp->autoneg & AUTONEG_SPEED))
bnx2_disable_forced_2g5(bp);
bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
if (bp->phy_flags & PHY_PARALLEL_DETECT_FLAG) {
u32 bmcr;
bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
bmcr |= BMCR_ANENABLE;
bnx2_write_phy(bp, bp->mii_bmcr, bmcr);
bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
}
bp->link_up = 0;
}
......@@ -5276,13 +5301,51 @@ bnx2_test_intr(struct bnx2 *bp)
return -ENODEV;
}
static int
bnx2_5706_serdes_has_link(struct bnx2 *bp)
{
u32 mode_ctl, an_dbg, exp;
bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_MODE_CTL);
bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &mode_ctl);
if (!(mode_ctl & MISC_SHDW_MODE_CTL_SIG_DET))
return 0;
bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_AN_DBG);
bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &an_dbg);
bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &an_dbg);
if (an_dbg & MISC_SHDW_AN_DBG_NOSYNC)
return 0;
bnx2_write_phy(bp, MII_BNX2_DSP_ADDRESS, MII_EXPAND_REG1);
bnx2_read_phy(bp, MII_BNX2_DSP_RW_PORT, &exp);
bnx2_read_phy(bp, MII_BNX2_DSP_RW_PORT, &exp);
if (exp & MII_EXPAND_REG1_RUDI_C) /* receiving CONFIG */
return 0;
return 1;
}
static void
bnx2_5706_serdes_timer(struct bnx2 *bp)
{
int check_link = 1;
spin_lock(&bp->phy_lock);
if (bp->serdes_an_pending)
if (bp->phy_flags & PHY_FORCED_DOWN_FLAG) {
bnx2_5706s_force_link_dn(bp, 0);
bp->phy_flags &= ~PHY_FORCED_DOWN_FLAG;
spin_unlock(&bp->phy_lock);
return;
}
if (bp->serdes_an_pending) {
bp->serdes_an_pending--;
else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) {
check_link = 0;
} else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) {
u32 bmcr;
bp->current_interval = bp->timer_interval;
......@@ -5290,19 +5353,7 @@ bnx2_5706_serdes_timer(struct bnx2 *bp)
bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
if (bmcr & BMCR_ANENABLE) {
u32 phy1, phy2;
bnx2_write_phy(bp, 0x1c, 0x7c00);
bnx2_read_phy(bp, 0x1c, &phy1);
bnx2_write_phy(bp, 0x17, 0x0f01);
bnx2_read_phy(bp, 0x15, &phy2);
bnx2_write_phy(bp, 0x17, 0x0f01);
bnx2_read_phy(bp, 0x15, &phy2);
if ((phy1 & 0x10) && /* SIGNAL DETECT */
!(phy2 & 0x20)) { /* no CONFIG */
if (bnx2_5706_serdes_has_link(bp)) {
bmcr &= ~BMCR_ANENABLE;
bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX;
bnx2_write_phy(bp, bp->mii_bmcr, bmcr);
......@@ -5314,6 +5365,7 @@ bnx2_5706_serdes_timer(struct bnx2 *bp)
(bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)) {
u32 phy2;
check_link = 0;
bnx2_write_phy(bp, 0x17, 0x0f01);
bnx2_read_phy(bp, 0x15, &phy2);
if (phy2 & 0x20) {
......@@ -5328,6 +5380,18 @@ bnx2_5706_serdes_timer(struct bnx2 *bp)
} else
bp->current_interval = bp->timer_interval;
if (bp->link_up && (bp->autoneg & AUTONEG_SPEED) && check_link) {
u32 val;
bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_AN_DBG);
bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &val);
bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &val);
if (val & MISC_SHDW_AN_DBG_NOSYNC) {
bnx2_5706s_force_link_dn(bp, 1);
bp->phy_flags |= PHY_FORCED_DOWN_FLAG;
}
}
spin_unlock(&bp->phy_lock);
}
......
......@@ -6344,6 +6344,15 @@ struct l2_fhdr {
#define MII_BNX2_DSP_RW_PORT 0x15
#define MII_BNX2_DSP_ADDRESS 0x17
#define MII_BNX2_DSP_EXPAND_REG 0x0f00
#define MII_EXPAND_REG1 (MII_BNX2_DSP_EXPAND_REG | 1)
#define MII_EXPAND_REG1_RUDI_C 0x20
#define MII_EXPAND_SERDES_CTL (MII_BNX2_DSP_EXPAND_REG | 2)
#define MII_BNX2_MISC_SHADOW 0x1c
#define MISC_SHDW_AN_DBG 0x6800
#define MISC_SHDW_AN_DBG_NOSYNC 0x0002
#define MISC_SHDW_MODE_CTL 0x7c00
#define MISC_SHDW_MODE_CTL_SIG_DET 0x0010
#define MII_BNX2_BLK_ADDR 0x1f
#define MII_BNX2_BLK_ADDR_IEEE0 0x0000
......@@ -6643,6 +6652,7 @@ struct bnx2 {
#define PHY_INT_MODE_LINK_READY_FLAG 0x200
#define PHY_DIS_EARLY_DAC_FLAG 0x400
#define REMOTE_PHY_CAP_FLAG 0x800
#define PHY_FORCED_DOWN_FLAG 0x1000
u32 mii_bmcr;
u32 mii_bmsr;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment