brcmsmac: Use debug macros for general error and debug statements

Convert most uses of wiphy_* and pr_* for general error and debug
messages to use the internal debug macros instead. Most code used only
for initialization still use wiphy_err(), as well as some locations
which are executed too early to use the debug macros. Some debug
messages which are redundant or not useful are removed.
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Tested-by: Daniel Wagner <wagi@monom.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmsmac/ampdu.c

@@ -21,6 +21,7 @@
 #include "antsel.h"
 #include "main.h"
 #include "ampdu.h"
+#include "debug.h"
 
 /* max number of mpdus in an ampdu */
 #define AMPDU_MAX_MPDU			32
@@ -179,18 +180,19 @@ static bool brcms_c_ampdu_cap(struct ampdu_info *ampdu)
 static int brcms_c_ampdu_set(struct ampdu_info *ampdu, bool on)
 {
 	struct brcms_c_info *wlc = ampdu->wlc;
+	struct bcma_device *core = wlc->hw->d11core;
 
 	wlc->pub->_ampdu = false;
 
 	if (on) {
 		if (!(wlc->pub->_n_enab & SUPPORT_11N)) {
-			wiphy_err(ampdu->wlc->wiphy, "wl%d: driver not "
-				"nmode enabled\n", wlc->pub->unit);
+			brcms_err(core, "wl%d: driver not nmode enabled\n",
+				  wlc->pub->unit);
 			return -ENOTSUPP;
 		}
 		if (!brcms_c_ampdu_cap(ampdu)) {
-			wiphy_err(ampdu->wlc->wiphy, "wl%d: device not "
-				"ampdu capable\n", wlc->pub->unit);
+			brcms_err(core, "wl%d: device not ampdu capable\n",
+				  wlc->pub->unit);
 			return -ENOTSUPP;
 		}
 		wlc->pub->_ampdu = on;
@@ -481,7 +483,7 @@ brcms_c_ampdu_tx_operational(struct brcms_c_info *wlc, u8 tid,
 	scb_ampdu = &scb->scb_ampdu;
 
 	if (!ampdu->ini_enable[tid]) {
-		wiphy_err(ampdu->wlc->wiphy, "%s: Rejecting tid %d\n",
+		brcms_err(wlc->hw->d11core, "%s: Rejecting tid %d\n",
 			  __func__, tid);
 		return;
 	}
@@ -896,13 +898,14 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
 		if (supr_status) {
 			update_rate = false;
 			if (supr_status == TX_STATUS_SUPR_BADCH) {
-				wiphy_err(wiphy,
+				brcms_err(wlc->hw->d11core,
 					  "%s: Pkt tx suppressed, illegal channel possibly %d\n",
 					  __func__, CHSPEC_CHANNEL(
 					  wlc->default_bss->chanspec));
 			} else {
 				if (supr_status != TX_STATUS_SUPR_FRAG)
-					wiphy_err(wiphy, "%s: supr_status 0x%x\n",
+					brcms_err(wlc->hw->d11core,
+						  "%s: supr_status 0x%x\n",
 						  __func__, supr_status);
 			}
 			/* no need to retry for badch; will fail again */
@@ -923,7 +926,8 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
 			}
 		} else if (txs->phyerr) {
 			update_rate = false;
-			wiphy_err(wiphy, "%s: ampdu tx phy error (0x%x)\n",
+			brcms_err(wlc->hw->d11core,
+				  "%s: ampdu tx phy error (0x%x)\n",
 				  __func__, txs->phyerr);
 
 			if (brcm_msg_level & BRCM_DL_INFO) {

drivers/net/wireless/brcm80211/brcmsmac/antsel.c

@@ -21,6 +21,7 @@
 #include "main.h"
 #include "phy_shim.h"
 #include "antsel.h"
+#include "debug.h"
 
 #define ANT_SELCFG_AUTO		0x80	/* bit indicates antenna sel AUTO */
 #define ANT_SELCFG_MASK		0x33	/* antenna configuration mask */
@@ -137,7 +138,8 @@ struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc)
 				asi->antsel_avail = false;
 			} else {
 				asi->antsel_avail = false;
-				wiphy_err(wlc->wiphy, "antsel_attach: 2o3 "
+				brcms_err(wlc->hw->d11core,
+					  "antsel_attach: 2o3 "
 					  "board cfg invalid\n");
 			}
 

drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -26,6 +26,7 @@
 #include "stf.h"
 #include "channel.h"
 #include "mac80211_if.h"
+#include "debug.h"
 
 /* QDB() macro takes a dB value and converts to a quarter dB value */
 #define QDB(n) ((n) * BRCMS_TXPWR_DB_FACTOR)
@@ -336,8 +337,6 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 	const char *ccode = sprom->alpha2;
 	int ccode_len = sizeof(sprom->alpha2);
 
-	BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
-
 	wlc_cm = kzalloc(sizeof(struct brcms_cm_info), GFP_ATOMIC);
 	if (wlc_cm == NULL)
 		return NULL;
@@ -615,8 +614,8 @@ brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec)
 
 	/* check the chanspec */
 	if (brcms_c_chspec_malformed(chspec)) {
-		wiphy_err(wlc->wiphy, "wl%d: malformed chanspec 0x%x\n",
-			wlc->pub->unit, chspec);
+		brcms_err(wlc->hw->d11core, "wl%d: malformed chanspec 0x%x\n",
+			  wlc->pub->unit, chspec);
 		return false;
 	}
 
@@ -738,7 +737,8 @@ static int brcms_reg_notifier(struct wiphy *wiphy,
 		mboolclr(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
 	} else {
 		mboolset(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
-		wiphy_err(wlc->wiphy, "wl%d: %s: no valid channel for \"%s\"\n",
+		brcms_err(wlc->hw->d11core,
+			  "wl%d: %s: no valid channel for \"%s\"\n",
 			  wlc->pub->unit, __func__, request->alpha2);
 	}