Commit b36552b3 authored by Matt Roper's avatar Matt Roper Committed by Daniel Vetter

drm: Refactor setplane to allow internal use (v3)

Refactor DRM setplane code into a new setplane_internal() function that
takes DRM objects directly as parameters rather than looking them up by
ID.  We'll use this in a future patch when we implement legacy cursor
ioctls on top of the universal plane interface.

v3:
 - Move integer overflow checking from setplane_internal to setplane
   ioctl.  The upcoming legacy cursor support via universal planes needs
   to maintain current cursor ioctl semantics and not return error for
   these extreme values (found via intel-gpu-tools kms_cursor_crc test).
v2:
 - Allow planes to be disabled without a valid crtc again (and add
   mention of this to setplane's kerneldoc, since it doesn't seem to be
   mentioned anywhere else).
 - Reformat some parameter line wrap
Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: default avatarDave Airlie <airlied@linux.ie>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent c394c2b0
......@@ -2122,45 +2122,32 @@ int drm_mode_getplane(struct drm_device *dev, void *data,
return ret;
}
/**
* drm_mode_setplane - configure a plane's configuration
* @dev: DRM device
* @data: ioctl data*
* @file_priv: DRM file info
/*
* setplane_internal - setplane handler for internal callers
*
* Set plane configuration, including placement, fb, scaling, and other factors.
* Or pass a NULL fb to disable.
* Note that we assume an extra reference has already been taken on fb. If the
* update fails, this reference will be dropped before return; if it succeeds,
* the previous framebuffer (if any) will be unreferenced instead.
*
* Returns:
* Zero on success, errno on failure.
* src_{x,y,w,h} are provided in 16.16 fixed point format
*/
int drm_mode_setplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
static int setplane_internal(struct drm_crtc *crtc,
struct drm_plane *plane,
struct drm_framebuffer *fb,
int32_t crtc_x, int32_t crtc_y,
uint32_t crtc_w, uint32_t crtc_h,
/* src_{x,y,w,h} values are 16.16 fixed point */
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct drm_mode_set_plane *plane_req = data;
struct drm_plane *plane;
struct drm_crtc *crtc;
struct drm_framebuffer *fb = NULL, *old_fb = NULL;
struct drm_device *dev = crtc->dev;
struct drm_framebuffer *old_fb = NULL;
int ret = 0;
unsigned int fb_width, fb_height;
int i;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
/*
* First, find the plane, crtc, and fb objects. If not available,
* we don't bother to call the driver.
*/
plane = drm_plane_find(dev, plane_req->plane_id);
if (!plane) {
DRM_DEBUG_KMS("Unknown plane ID %d\n",
plane_req->plane_id);
return -ENOENT;
}
/* No fb means shut it down */
if (!plane_req->fb_id) {
if (!fb) {
drm_modeset_lock_all(dev);
old_fb = plane->fb;
ret = plane->funcs->disable_plane(plane);
......@@ -2174,14 +2161,6 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
goto out;
}
crtc = drm_crtc_find(dev, plane_req->crtc_id);
if (!crtc) {
DRM_DEBUG_KMS("Unknown crtc ID %d\n",
plane_req->crtc_id);
ret = -ENOENT;
goto out;
}
/* Check whether this plane is usable on this CRTC */
if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
DRM_DEBUG_KMS("Invalid crtc for plane\n");
......@@ -2189,14 +2168,6 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
goto out;
}
fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
if (!fb) {
DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
plane_req->fb_id);
ret = -ENOENT;
goto out;
}
/* Check whether this plane supports the fb pixel format. */
for (i = 0; i < plane->format_count; i++)
if (fb->pixel_format == plane->format_types[i])
......@@ -2212,43 +2183,25 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
fb_height = fb->height << 16;
/* Make sure source coordinates are inside the fb. */
if (plane_req->src_w > fb_width ||
plane_req->src_x > fb_width - plane_req->src_w ||
plane_req->src_h > fb_height ||
plane_req->src_y > fb_height - plane_req->src_h) {
if (src_w > fb_width ||
src_x > fb_width - src_w ||
src_h > fb_height ||
src_y > fb_height - src_h) {
DRM_DEBUG_KMS("Invalid source coordinates "
"%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
plane_req->src_w >> 16,
((plane_req->src_w & 0xffff) * 15625) >> 10,
plane_req->src_h >> 16,
((plane_req->src_h & 0xffff) * 15625) >> 10,
plane_req->src_x >> 16,
((plane_req->src_x & 0xffff) * 15625) >> 10,
plane_req->src_y >> 16,
((plane_req->src_y & 0xffff) * 15625) >> 10);
src_w >> 16, ((src_w & 0xffff) * 15625) >> 10,
src_h >> 16, ((src_h & 0xffff) * 15625) >> 10,
src_x >> 16, ((src_x & 0xffff) * 15625) >> 10,
src_y >> 16, ((src_y & 0xffff) * 15625) >> 10);
ret = -ENOSPC;
goto out;
}
/* Give drivers some help against integer overflows */
if (plane_req->crtc_w > INT_MAX ||
plane_req->crtc_x > INT_MAX - (int32_t) plane_req->crtc_w ||
plane_req->crtc_h > INT_MAX ||
plane_req->crtc_y > INT_MAX - (int32_t) plane_req->crtc_h) {
DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
plane_req->crtc_w, plane_req->crtc_h,
plane_req->crtc_x, plane_req->crtc_y);
ret = -ERANGE;
goto out;
}
drm_modeset_lock_all(dev);
old_fb = plane->fb;
ret = plane->funcs->update_plane(plane, crtc, fb,
plane_req->crtc_x, plane_req->crtc_y,
plane_req->crtc_w, plane_req->crtc_h,
plane_req->src_x, plane_req->src_y,
plane_req->src_w, plane_req->src_h);
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
if (!ret) {
plane->crtc = crtc;
plane->fb = fb;
......@@ -2265,6 +2218,81 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
drm_framebuffer_unreference(old_fb);
return ret;
}
/**
* drm_mode_setplane - configure a plane's configuration
* @dev: DRM device
* @data: ioctl data*
* @file_priv: DRM file info
*
* Set plane configuration, including placement, fb, scaling, and other factors.
* Or pass a NULL fb to disable (planes may be disabled without providing a
* valid crtc).
*
* Returns:
* Zero on success, errno on failure.
*/
int drm_mode_setplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_set_plane *plane_req = data;
struct drm_mode_object *obj;
struct drm_plane *plane;
struct drm_crtc *crtc = NULL;
struct drm_framebuffer *fb = NULL;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
/* Give drivers some help against integer overflows */
if (plane_req->crtc_w > INT_MAX ||
plane_req->crtc_x > INT_MAX - (int32_t) plane_req->crtc_w ||
plane_req->crtc_h > INT_MAX ||
plane_req->crtc_y > INT_MAX - (int32_t) plane_req->crtc_h) {
DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
plane_req->crtc_w, plane_req->crtc_h,
plane_req->crtc_x, plane_req->crtc_y);
return -ERANGE;
}
/*
* First, find the plane, crtc, and fb objects. If not available,
* we don't bother to call the driver.
*/
obj = drm_mode_object_find(dev, plane_req->plane_id,
DRM_MODE_OBJECT_PLANE);
if (!obj) {
DRM_DEBUG_KMS("Unknown plane ID %d\n",
plane_req->plane_id);
return -ENOENT;
}
plane = obj_to_plane(obj);
if (plane_req->fb_id) {
fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
if (!fb) {
DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
plane_req->fb_id);
return -ENOENT;
}
obj = drm_mode_object_find(dev, plane_req->crtc_id,
DRM_MODE_OBJECT_CRTC);
if (!obj) {
DRM_DEBUG_KMS("Unknown crtc ID %d\n",
plane_req->crtc_id);
return -ENOENT;
}
crtc = obj_to_crtc(obj);
}
return setplane_internal(crtc, plane, fb,
plane_req->crtc_x, plane_req->crtc_y,
plane_req->crtc_w, plane_req->crtc_h,
plane_req->src_x, plane_req->src_y,
plane_req->src_w, plane_req->src_h);
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment