ath9k_hw: split the generic hardware code by hardware family

Move out the generic hardware family code out into their own
files, we have one for AR5008, AR9001, and AR9002 family (ar9002_hw.c)
and another file for the new AR9003 hardware family (ar9003_hw.c).
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/Makefile

@@ -13,7 +13,10 @@ ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
 
 obj-$(CONFIG_ATH9K) += ath9k.o
 
-ath9k_hw-y:=	hw.o \
+ath9k_hw-y:=	\
+		ar9002_hw.o \
+		ar9003_hw.o \
+		hw.o \
 		ar9003_phy.o \
 		ar9002_phy.o \
 		ar5008_phy.o \

drivers/net/wireless/ath/ath9k/ar9003_hw.c

+/*
+ * Copyright (c) 2008-2010 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "hw.h"
+#include "ar9003_initvals.h"
+
+/* General hardware code for the AR9003 hadware family */
+
+static bool ar9003_hw_macversion_supported(u32 macversion)
+{
+	switch (macversion) {
+	case AR_SREV_VERSION_9300:
+		return true;
+	default:
+		break;
+	}
+	return false;
+}
+
+/* AR9003 2.0 - new INI format (pre, core, post arrays per subsystem) */
+static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
+{
+	/* mac */
+	INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+	INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+		       ar9300_2p0_mac_core,
+		       ARRAY_SIZE(ar9300_2p0_mac_core), 2);
+	INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+		       ar9300_2p0_mac_postamble,
+		       ARRAY_SIZE(ar9300_2p0_mac_postamble), 5);
+
+	/* bb */
+	INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
+	INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+		       ar9300_2p0_baseband_core,
+		       ARRAY_SIZE(ar9300_2p0_baseband_core), 2);
+	INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+		       ar9300_2p0_baseband_postamble,
+		       ARRAY_SIZE(ar9300_2p0_baseband_postamble), 5);
+
+	/* radio */
+	INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+	INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+		       ar9300_2p0_radio_core,
+		       ARRAY_SIZE(ar9300_2p0_radio_core), 2);
+	INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+		       ar9300_2p0_radio_postamble,
+		       ARRAY_SIZE(ar9300_2p0_radio_postamble), 5);
+
+	/* soc */
+	INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+		       ar9300_2p0_soc_preamble,
+		       ARRAY_SIZE(ar9300_2p0_soc_preamble), 2);
+	INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+	INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
+		       ar9300_2p0_soc_postamble,
+		       ARRAY_SIZE(ar9300_2p0_soc_postamble), 5);
+
+	/* rx/tx gain */
+	INIT_INI_ARRAY(&ah->iniModesRxGain,
+		       ar9300Common_rx_gain_table_2p0,
+		       ARRAY_SIZE(ar9300Common_rx_gain_table_2p0), 2);
+	INIT_INI_ARRAY(&ah->iniModesTxGain,
+		       ar9300Modes_lowest_ob_db_tx_gain_table_2p0,
+		       ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p0),
+		       5);
+
+	/* Load PCIE SERDES settings from INI */
+
+	/* Awake Setting */
+
+	INIT_INI_ARRAY(&ah->iniPcieSerdes,
+		       ar9300PciePhy_pll_on_clkreq_disable_L1_2p0,
+		       ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p0),
+		       2);
+
+	/* Sleep Setting */
+
+	INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+		       ar9300PciePhy_clkreq_enable_L1_2p0,
+		       ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p0),
+		       2);
+
+	/* Fast clock modal settings */
+	INIT_INI_ARRAY(&ah->iniModesAdditional,
+		       ar9300Modes_fast_clock_2p0,
+		       ARRAY_SIZE(ar9300Modes_fast_clock_2p0),
+		       3);
+}
+
+/*
+ * Helper for ASPM support.
+ *
+ * Disable PLL when in L0s as well as receiver clock when in L1.
+ * This power saving option must be enabled through the SerDes.
+ *
+ * Programming the SerDes must go through the same 288 bit serial shift
+ * register as the other analog registers.  Hence the 9 writes.
+ */
+static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
+					 int restore,
+					 int power_off)
+{
+	if (ah->is_pciexpress != true)
+		return;
+
+	/* Do not touch SerDes registers */
+	if (ah->config.pcie_powersave_enable == 2)
+		return;
+
+	/* Nothing to do on restore for 11N */
+	if (!restore) {
+		/* set bit 19 to allow forcing of pcie core into L1 state */
+		REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+
+		/* Several PCIe massages to ensure proper behaviour */
+		if (ah->config.pcie_waen)
+			REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
+	}
+}
+
+/* Sets up the AR9003 hardware familiy callbacks */
+void ar9003_hw_attach_ops(struct ath_hw *ah)
+{
+	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+	struct ath_hw_ops *ops = ath9k_hw_ops(ah);
+
+	priv_ops->init_mode_regs = ar9003_hw_init_mode_regs;
+	priv_ops->macversion_supported = ar9003_hw_macversion_supported;
+
+	ops->config_pci_powersave = ar9003_hw_configpcipowersave;
+
+	ar9003_hw_attach_phy_ops(ah);
+	ar9003_hw_attach_calib_ops(ah);
+	ar9003_hw_attach_mac_ops(ah);
+}

drivers/net/wireless/ath/ath9k/hw.h

 /*
- * Copyright (c) 2008-2009 Atheros Communications Inc.
+ * Copyright (c) 2008-2010 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -852,6 +852,9 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah);
 void ar9002_hw_attach_calib_ops(struct ath_hw *ah);
 void ar9003_hw_attach_calib_ops(struct ath_hw *ah);
 
+void ar9002_hw_attach_ops(struct ath_hw *ah);
+void ar9003_hw_attach_ops(struct ath_hw *ah);
+
 #define ATH_PCIE_CAP_LINK_CTRL	0x70
 #define ATH_PCIE_CAP_LINK_L0S	1
 #define ATH_PCIE_CAP_LINK_L1	2