Commit b396dc45 authored by Uwe Kleine-König's avatar Uwe Kleine-König

ARM: mx3/mx31_3ds: fold board header in its only user

Moreover remove unused definitions.
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
parent d57351a3
......@@ -37,19 +37,47 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/board-mx31_3ds.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/mxc_nand.h>
#include <mach/spi.h>
#include "devices.h"
/*!
* @file mx31_3ds.c
*
* @brief This file contains the board-specific initialization routines.
*
* @ingroup System
/* Definitions for components on the Debug board */
/* Base address of CPLD controller on the Debug board */
#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
/* LAN9217 ethernet base address */
#define LAN9217_BASE_ADDR MX3x_CS5_BASE_ADDR
/* CPLD config and interrupt base address */
#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
/* status, interrupt */
#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
/* magic word for debug CPLD */
#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
/* CPLD code version */
#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
/* magic word for debug CPLD */
#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
/* CPLD IRQ line for external uart, external ethernet etc */
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
#define MXC_MAX_EXP_IO_LINES 16
/*
* This file contains the board-specific initialization routines.
*/
static int mx31_3ds_pins[] = {
......
/*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
/* Definitions for components on the Debug board */
/* Base address of CPLD controller on the Debug board */
#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR)
/* LAN9217 ethernet base address */
#define LAN9217_BASE_ADDR CS5_BASE_ADDR
/* CPLD config and interrupt base address */
#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
/* LED switchs */
#define CPLD_LED_REG (CPLD_ADDR + 0x00)
/* buttons */
#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
/* status, interrupt */
#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
/* magic word for debug CPLD */
#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
/* CPLD code version */
#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
/* magic word for debug CPLD */
#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
/* module reset register */
#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60)
/* CPU ID and Personality ID */
#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68)
/* CPLD IRQ line for external uart, external ethernet etc */
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1)
#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2)
#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3)
#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4)
#define MXC_MAX_EXP_IO_LINES 16
#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment