Commit b3a242b7 authored by Adrian Bunk's avatar Adrian Bunk Committed by Jeff Garzik

more ftape removal

This patch removes some more ftape code.
Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 2596627c
......@@ -129,7 +129,6 @@ header-y += posix_types.h
header-y += ppdev.h
header-y += prctl.h
header-y += ps2esdi.h
header-y += qic117.h
header-y += qnxtypes.h
header-y += quotaio_v1.h
header-y += quotaio_v2.h
......
......@@ -10,7 +10,6 @@
#include <linux/types.h>
#include <linux/ioctl.h>
#include <linux/qic117.h>
/*
* Structures and definitions for mag tape io control commands
......@@ -116,32 +115,6 @@ struct mtget {
#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */
#define MT_ISFTAPE_FLAG 0x800000
struct mt_tape_info {
long t_type; /* device type id (mt_type) */
char *t_name; /* descriptive name */
};
#define MT_TAPE_INFO { \
{MT_ISUNKNOWN, "Unknown type of tape device"}, \
{MT_ISQIC02, "Generic QIC-02 tape streamer"}, \
{MT_ISWT5150, "Wangtek 5150, QIC-150"}, \
{MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \
{MT_ISCMSJ500, "CMS Jumbo 500"}, \
{MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \
{MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \
{MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \
{MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \
{MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \
{MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \
{MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \
{MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \
{MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \
{MT_ISONSTREAM_SC, "OnStream SC-, DI-, DP-, or USB tape drive"}, \
{MT_ISSCSI1, "Generic SCSI-1 tape"}, \
{MT_ISSCSI2, "Generic SCSI-2 tape"}, \
{0, NULL} \
}
/* structure for MTIOCPOS - mag tape get position command */
......@@ -150,130 +123,11 @@ struct mtpos {
};
/* structure for MTIOCVOLINFO, query information about the volume
* currently positioned at (zftape)
*/
struct mtvolinfo {
unsigned int mt_volno; /* vol-number */
unsigned int mt_blksz; /* blocksize used when recording */
unsigned int mt_rawsize; /* raw tape space consumed, in kb */
unsigned int mt_size; /* volume size after decompression, in kb */
unsigned int mt_cmpr:1; /* this volume has been compressed */
};
/* raw access to a floppy drive, read and write an arbitrary segment.
* For ftape/zftape to support formatting etc.
*/
#define MT_FT_RD_SINGLE 0
#define MT_FT_RD_AHEAD 1
#define MT_FT_WR_ASYNC 0 /* start tape only when all buffers are full */
#define MT_FT_WR_MULTI 1 /* start tape, continue until buffers are empty */
#define MT_FT_WR_SINGLE 2 /* write a single segment and stop afterwards */
#define MT_FT_WR_DELETE 3 /* write deleted data marks, one segment at time */
struct mtftseg
{
unsigned mt_segno; /* the segment to read or write */
unsigned mt_mode; /* modes for read/write (sync/async etc.) */
int mt_result; /* result of r/w request, not of the ioctl */
void __user *mt_data; /* User space buffer: must be 29kb */
};
/* get tape capacity (ftape/zftape)
*/
struct mttapesize {
unsigned long mt_capacity; /* entire, uncompressed capacity
* of a cartridge
*/
unsigned long mt_used; /* what has been used so far, raw
* uncompressed amount
*/
};
/* possible values of the ftfmt_op field
*/
#define FTFMT_SET_PARMS 1 /* set software parms */
#define FTFMT_GET_PARMS 2 /* get software parms */
#define FTFMT_FORMAT_TRACK 3 /* start formatting a tape track */
#define FTFMT_STATUS 4 /* monitor formatting a tape track */
#define FTFMT_VERIFY 5 /* verify the given segment */
struct ftfmtparms {
unsigned char ft_qicstd; /* QIC-40/QIC-80/QIC-3010/QIC-3020 */
unsigned char ft_fmtcode; /* Refer to the QIC specs */
unsigned char ft_fhm; /* floppy head max */
unsigned char ft_ftm; /* floppy track max */
unsigned short ft_spt; /* segments per track */
unsigned short ft_tpc; /* tracks per cartridge */
};
struct ftfmttrack {
unsigned int ft_track; /* track to format */
unsigned char ft_gap3; /* size of gap3, for FORMAT_TRK */
};
struct ftfmtstatus {
unsigned int ft_segment; /* segment currently being formatted */
};
struct ftfmtverify {
unsigned int ft_segment; /* segment to verify */
unsigned long ft_bsm; /* bsm as result of VERIFY cmd */
};
struct mtftformat {
unsigned int fmt_op; /* operation to perform */
union fmt_arg {
struct ftfmtparms fmt_parms; /* format parameters */
struct ftfmttrack fmt_track; /* ctrl while formatting */
struct ftfmtstatus fmt_status;
struct ftfmtverify fmt_verify; /* for verifying */
} fmt_arg;
};
struct mtftcmd {
unsigned int ft_wait_before; /* timeout to wait for drive to get ready
* before command is sent. Milliseconds
*/
qic117_cmd_t ft_cmd; /* command to send */
unsigned char ft_parm_cnt; /* zero: no parm is sent. */
unsigned char ft_parms[3]; /* parameter(s) to send to
* the drive. The parms are nibbles
* driver sends cmd + 2 step pulses */
unsigned int ft_result_bits; /* if non zero, number of bits
* returned by the tape drive
*/
unsigned int ft_result; /* the result returned by the tape drive*/
unsigned int ft_wait_after; /* timeout to wait for drive to get ready
* after command is sent. 0: don't wait */
int ft_status; /* status returned by ready wait
* undefined if timeout was 0.
*/
int ft_error; /* error code if error status was set by
* command
*/
};
/* mag tape io control commands */
#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */
#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */
#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */
/* The next two are used by the QIC-02 driver for runtime reconfiguration.
* See tpqic02.h for struct mtconfiginfo.
*/
#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* get tape config */
#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* set tape config */
/* the next six are used by the floppy ftape drivers and its frontends
* sorry, but MTIOCTOP commands are write only.
*/
#define MTIOCRDFTSEG _IOWR('m', 6, struct mtftseg) /* read a segment */
#define MTIOCWRFTSEG _IOWR('m', 7, struct mtftseg) /* write a segment */
#define MTIOCVOLINFO _IOR('m', 8, struct mtvolinfo) /* info about volume */
#define MTIOCGETSIZE _IOR('m', 9, struct mttapesize)/* get cartridge size*/
#define MTIOCFTFORMAT _IOWR('m', 10, struct mtftformat) /* format ftape */
#define MTIOCFTCMD _IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */
/* Generic Mag Tape (device independent) status macros for examining
* mt_gstat -- HP-UX compatible.
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment