Commit b3b6cf1d authored by Rene van Paassen's avatar Rene van Paassen Committed by Dmitry Torokhov

Input: aiptek - correct the tool switching code

Now the old tool is remembered, and reset when a new tool is
selected via the sysfs files.
Signed-off-by: default avatarRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent da9fda43
......@@ -218,15 +218,9 @@
#define AIPTEK_WHEEL_DISABLE (-10101)
/* ToolCode values, which BTW are 0x140 .. 0x14f
* We have things set up such that if TOOL_BUTTON_FIRED_BIT is
* not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx.
*
* Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will
* get reset.
* We have things set up such that if the tool button has changed,
* the tools get reset.
*/
#define TOOL_BUTTON(x) ((x) & 0x14f)
#define TOOL_BUTTON_FIRED(x) ((x) & 0x200)
#define TOOL_BUTTON_FIRED_BIT 0x200
/* toolMode codes
*/
#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN
......@@ -326,6 +320,9 @@ struct aiptek {
int inDelay; /* jitter: in jitter delay? */
unsigned long endDelay; /* jitter: time when delay ends */
int previousJitterable; /* jitterable prev value */
int lastMacro; /* macro key to reset */
int previousToolMode; /* pen, pencil, brush, etc. tool */
unsigned char *data; /* incoming packet data */
};
......@@ -542,16 +539,18 @@ static void aiptek_irq(struct urb *urb)
* all 'bad' reports...
*/
if (dv != 0) {
/* If we've not already sent a tool_button_?? code, do
* so now. Then set FIRED_BIT so it won't be resent unless
* the user forces FIRED_BIT off.
/* If the selected tool changed, reset the old
* tool key, and set the new one.
*/
if (TOOL_BUTTON_FIRED
(aiptek->curSetting.toolMode) == 0) {
if (aiptek->previousToolMode !=
aiptek->curSetting.toolMode) {
input_report_key(inputdev,
aiptek->previousToolMode, 0);
input_report_key(inputdev,
TOOL_BUTTON(aiptek->curSetting.toolMode),
aiptek->curSetting.toolMode,
1);
aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
aiptek->previousToolMode =
aiptek->curSetting.toolMode;
}
if (p != 0) {
......@@ -612,16 +611,18 @@ static void aiptek_irq(struct urb *urb)
middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
if (dv != 0) {
/* If we've not already sent a tool_button_?? code, do
* so now. Then set FIRED_BIT so it won't be resent unless
* the user forces FIRED_BIT off.
/* If the selected tool changed, reset the old
* tool key, and set the new one.
*/
if (TOOL_BUTTON_FIRED
(aiptek->curSetting.toolMode) == 0) {
if (aiptek->previousToolMode !=
aiptek->curSetting.toolMode) {
input_report_key(inputdev,
aiptek->previousToolMode, 0);
input_report_key(inputdev,
TOOL_BUTTON(aiptek->curSetting.toolMode),
aiptek->curSetting.toolMode,
1);
aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
aiptek->previousToolMode =
aiptek->curSetting.toolMode;
}
if (p != 0) {
......@@ -662,15 +663,18 @@ static void aiptek_irq(struct urb *urb)
z = le16_to_cpu(get_unaligned((__le16 *) (data + 4)));
if (dv != 0) {
/* If we've not already sent a tool_button_?? code, do
* so now. Then set FIRED_BIT so it won't be resent unless
* the user forces FIRED_BIT off.
/* If the selected tool changed, reset the old
* tool key, and set the new one.
*/
if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
if (aiptek->previousToolMode !=
aiptek->curSetting.toolMode) {
input_report_key(inputdev,
aiptek->previousToolMode, 0);
input_report_key(inputdev,
TOOL_BUTTON(aiptek->curSetting.toolMode),
aiptek->curSetting.toolMode,
1);
aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
aiptek->previousToolMode =
aiptek->curSetting.toolMode;
}
if (p != 0) {
......@@ -710,15 +714,18 @@ static void aiptek_irq(struct urb *urb)
macro = data[3];
if (dv != 0) {
/* If we've not already sent a tool_button_?? code, do
* so now. Then set FIRED_BIT so it won't be resent unless
* the user forces FIRED_BIT off.
/* If the selected tool changed, reset the old
* tool key, and set the new one.
*/
if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
if (aiptek->previousToolMode !=
aiptek->curSetting.toolMode) {
input_report_key(inputdev,
aiptek->previousToolMode, 0);
input_report_key(inputdev,
TOOL_BUTTON(aiptek->curSetting.toolMode),
aiptek->curSetting.toolMode,
1);
aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
aiptek->previousToolMode =
aiptek->curSetting.toolMode;
}
if (p != 0) {
......@@ -762,15 +769,18 @@ static void aiptek_irq(struct urb *urb)
0);
}
/* If we've not already sent a tool_button_?? code, do
* so now. Then set FIRED_BIT so it won't be resent unless
* the user forces FIRED_BIT off.
*/
if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
/* If the selected tool changed, reset the old
tool key, and set the new one.
*/
if (aiptek->previousToolMode !=
aiptek->curSetting.toolMode) {
input_report_key(inputdev,
aiptek->previousToolMode, 0);
input_report_key(inputdev,
TOOL_BUTTON(aiptek->curSetting.
toolMode), 1);
aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
aiptek->curSetting.toolMode,
1);
aiptek->previousToolMode =
aiptek->curSetting.toolMode;
}
input_report_key(inputdev, macroKeyEvents[macro], 1);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment