Merge tag 'imx-soc-3.17' of...

Merge tag 'imx-soc-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Merge "ARM: imx: SoC changes for 3.17" from Shawn Guo:

The i.MX SoC changes for 3.17:
 - Add devicetree support for i.MX1 and i.MX21 clock driver
 - Use CLOCKSOURCE_OF_DECLARE() to initialize timer for DT targets
 - Use of_clk_init() to initialize i.MX25 and i.MX27 clock driver in
   device tree boot
 - Remove i.MX1 camera support
 - Remove i.MX27 IP Camera and Lite-Kit board support
 - Add suspend and cpuidle support for i.mx6sx
 - Clean up unused clk_register_clkdev() lookups
 - Update imx-weim bus driver to support populating devices on a simple
   bus
 - Switch i.MX27 and i.MX6QDL clock driver to use macro for clock IDs
 - Make i.MX51 a DT only platform and clean up the non-DT support code
 - Support disabling supervisor protect via DT
 - Random defconfig updates

* tag 'imx-soc-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (69 commits)
  ARM: imx: clk-vf610: fix FlexCAN clock gating
  ARM: i.MX: Use CLOCKSOURCE_OF_DECLARE() for DT targets
  ARM: i.MX53: globally disable supervisor protect
  ARM: i.MX: allow disabling supervisor protect via DT
  ARM: i.MX27 clk: Add 26 MHz oscillator circuit clock gate
  ARM: i.MX27 clk: Remove unused definitions
  ARM: i.MX27 clk: Introduce DT include for clock provider
  ARM: i.MX: Remove Freescale Logic Product Development i.MX27 Lite-Kit board support
  ARM: i.MX: Remove excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27
  ARM: i.MX: Remove i.MX1 camera support
  ARM: imx: use PTR_ERR_OR_ZERO
  bus: imx-weim: populate devices on a simple bus
  ARM: imx: build cpu_is_imx6sl function conditionally
  ARM: imx: imx6sx uses imx6q cpuidle code
  ARM: imx: drop PL310 errata 588369 and 727915
  ARM: imx_v6_v7_defconfig: add FSL_EDMA and PRINTK_TIME
  ARM: imx: clk-imx6sx: register SSI/SSI_IPG as shared gate clocks
  ARM: imx_v6_v7_defconfig: Enable flexcan driver for can support
  ARM: imx_v6_v7_defconfig: Enable STMPE gpio support
  ARM: imx: mark .dt_compat as const
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/clock/imx1-clock.txt

+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+	clks: ccm@0021b000 {
+		#clock-cells = <1>;
+		compatible = "fsl,imx1-ccm";
+		reg = <0x0021b000 0x1000>;
+	};
+
+	pwm: pwm@00208000 {
+		#pwm-cells = <2>;
+		compatible = "fsl,imx1-pwm";
+		reg = <0x00208000 0x1000>;
+		interrupts = <34>;
+		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+		clock-names = "ipg", "per";
+	};

Documentation/devicetree/bindings/clock/imx21-clock.txt

+* Clock bindings for Freescale i.MX21
+
+Required properties:
+- compatible  : Should be "fsl,imx21-ccm".
+- reg         : Address and length of the register set.
+- interrupts  : Should contain CCM interrupt.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+for the full list of i.MX21 clock IDs.
+
+Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx21-ccm";
+		reg = <0x10027000 0x800>;
+		#clock-cells = <1>;
+	};
+
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+			 <&clks IMX21_CLK_PER1>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/imx27-clock.txt

@@ -7,117 +7,22 @@ Required properties:
 - #clock-cells: Should be <1>
 
 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX27
-clocks and IDs.
-
-	Clock		    ID
-	-----------------------
-	dummy                0
-	ckih                 1
-	ckil                 2
-	mpll                 3
-	spll                 4
-	mpll_main2           5
-	ahb                  6
-	ipg                  7
-	nfc_div              8
-	per1_div             9
-	per2_div             10
-	per3_div             11
-	per4_div             12
-	vpu_sel              13
-	vpu_div              14
-	usb_div              15
-	cpu_sel              16
-	clko_sel             17
-	cpu_div              18
-	clko_div             19
-	ssi1_sel             20
-	ssi2_sel             21
-	ssi1_div             22
-	ssi2_div             23
-	clko_en              24
-	ssi2_ipg_gate        25
-	ssi1_ipg_gate        26
-	slcdc_ipg_gate       27
-	sdhc3_ipg_gate       28
-	sdhc2_ipg_gate       29
-	sdhc1_ipg_gate       30
-	scc_ipg_gate         31
-	sahara_ipg_gate      32
-	rtc_ipg_gate         33
-	pwm_ipg_gate         34
-	owire_ipg_gate       35
-	lcdc_ipg_gate        36
-	kpp_ipg_gate         37
-	iim_ipg_gate         38
-	i2c2_ipg_gate        39
-	i2c1_ipg_gate        40
-	gpt6_ipg_gate        41
-	gpt5_ipg_gate        42
-	gpt4_ipg_gate        43
-	gpt3_ipg_gate        44
-	gpt2_ipg_gate        45
-	gpt1_ipg_gate        46
-	gpio_ipg_gate        47
-	fec_ipg_gate         48
-	emma_ipg_gate        49
-	dma_ipg_gate         50
-	cspi3_ipg_gate       51
-	cspi2_ipg_gate       52
-	cspi1_ipg_gate       53
-	nfc_baud_gate        54
-	ssi2_baud_gate       55
-	ssi1_baud_gate       56
-	vpu_baud_gate        57
-	per4_gate            58
-	per3_gate            59
-	per2_gate            60
-	per1_gate            61
-	usb_ahb_gate         62
-	slcdc_ahb_gate       63
-	sahara_ahb_gate      64
-	lcdc_ahb_gate        65
-	vpu_ahb_gate         66
-	fec_ahb_gate         67
-	emma_ahb_gate        68
-	emi_ahb_gate         69
-	dma_ahb_gate         70
-	csi_ahb_gate         71
-	brom_ahb_gate        72
-	ata_ahb_gate         73
-	wdog_ipg_gate        74
-	usb_ipg_gate         75
-	uart6_ipg_gate       76
-	uart5_ipg_gate       77
-	uart4_ipg_gate       78
-	uart3_ipg_gate       79
-	uart2_ipg_gate       80
-	uart1_ipg_gate       81
-	ckih_div1p5          82
-	fpm                  83
-	mpll_osc_sel         84
-	mpll_sel             85
-	spll_gate            86
-	mshc_div             87
-	rtic_ipg_gate        88
-	mshc_ipg_gate        89
-	rtic_ahb_gate        90
-	mshc_baud_gate       91
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+for the full list of i.MX27 clock IDs.
 
 Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx27-ccm";
+		reg = <0x10027000 0x1000>;
+		#clock-cells = <1>;
+	};
 
-clks: ccm@10027000{
-	compatible = "fsl,imx27-ccm";
-	reg = <0x10027000 0x1000>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@1000a000 {
-	compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-	reg = <0x1000a000 0x1000>;
-	interrupts = <20>;
-	clocks = <&clks 81>, <&clks 61>;
-	clock-names = "ipg", "per";
-	status = "disabled";
-};
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+			 <&clks IMX27_CLK_PER1_GATE>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -7,223 +7,13 @@ Required properties:
 - #clock-cells: Should be <1>
 
 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX6Q
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	ckil			1
-	ckih			2
-	osc			3
-	pll2_pfd0_352m		4
-	pll2_pfd1_594m		5
-	pll2_pfd2_396m		6
-	pll3_pfd0_720m		7
-	pll3_pfd1_540m		8
-	pll3_pfd2_508m		9
-	pll3_pfd3_454m		10
-	pll2_198m		11
-	pll3_120m		12
-	pll3_80m		13
-	pll3_60m		14
-	twd			15
-	step			16
-	pll1_sw			17
-	periph_pre		18
-	periph2_pre		19
-	periph_clk2_sel		20
-	periph2_clk2_sel	21
-	axi_sel			22
-	esai_sel		23
-	asrc_sel		24
-	spdif_sel		25
-	gpu2d_axi		26
-	gpu3d_axi		27
-	gpu2d_core_sel		28
-	gpu3d_core_sel		29
-	gpu3d_shader_sel	30
-	ipu1_sel		31
-	ipu2_sel		32
-	ldb_di0_sel		33
-	ldb_di1_sel		34
-	ipu1_di0_pre_sel	35
-	ipu1_di1_pre_sel	36
-	ipu2_di0_pre_sel	37
-	ipu2_di1_pre_sel	38
-	ipu1_di0_sel		39
-	ipu1_di1_sel		40
-	ipu2_di0_sel		41
-	ipu2_di1_sel		42
-	hsi_tx_sel		43
-	pcie_axi_sel		44
-	ssi1_sel		45
-	ssi2_sel		46
-	ssi3_sel		47
-	usdhc1_sel		48
-	usdhc2_sel		49
-	usdhc3_sel		50
-	usdhc4_sel		51
-	enfc_sel		52
-	emi_sel			53
-	emi_slow_sel		54
-	vdo_axi_sel		55
-	vpu_axi_sel		56
-	cko1_sel		57
-	periph			58
-	periph2			59
-	periph_clk2		60
-	periph2_clk2		61
-	ipg			62
-	ipg_per			63
-	esai_pred		64
-	esai_podf		65
-	asrc_pred		66
-	asrc_podf		67
-	spdif_pred		68
-	spdif_podf		69
-	can_root		70
-	ecspi_root		71
-	gpu2d_core_podf		72
-	gpu3d_core_podf		73
-	gpu3d_shader		74
-	ipu1_podf		75
-	ipu2_podf		76
-	ldb_di0_podf		77
-	ldb_di1_podf		78
-	ipu1_di0_pre		79
-	ipu1_di1_pre		80
-	ipu2_di0_pre		81
-	ipu2_di1_pre		82
-	hsi_tx_podf		83
-	ssi1_pred		84
-	ssi1_podf		85
-	ssi2_pred		86
-	ssi2_podf		87
-	ssi3_pred		88
-	ssi3_podf		89
-	uart_serial_podf	90
-	usdhc1_podf		91
-	usdhc2_podf		92
-	usdhc3_podf		93
-	usdhc4_podf		94
-	enfc_pred		95
-	enfc_podf		96
-	emi_podf		97
-	emi_slow_podf		98
-	vpu_axi_podf		99
-	cko1_podf		100
-	axi			101
-	mmdc_ch0_axi_podf	102
-	mmdc_ch1_axi_podf	103
-	arm			104
-	ahb			105
-	apbh_dma		106
-	asrc			107
-	can1_ipg		108
-	can1_serial		109
-	can2_ipg		110
-	can2_serial		111
-	ecspi1			112
-	ecspi2			113
-	ecspi3			114
-	ecspi4			115
-	ecspi5			116
-	enet			117
-	esai			118
-	gpt_ipg			119
-	gpt_ipg_per		120
-	gpu2d_core		121
-	gpu3d_core		122
-	hdmi_iahb		123
-	hdmi_isfr		124
-	i2c1			125
-	i2c2			126
-	i2c3			127
-	iim			128
-	enfc			129
-	ipu1			130
-	ipu1_di0		131
-	ipu1_di1		132
-	ipu2			133
-	ipu2_di0		134
-	ldb_di0			135
-	ldb_di1			136
-	ipu2_di1		137
-	hsi_tx			138
-	mlb			139
-	mmdc_ch0_axi		140
-	mmdc_ch1_axi		141
-	ocram			142
-	openvg_axi		143
-	pcie_axi		144
-	pwm1			145
-	pwm2			146
-	pwm3			147
-	pwm4			148
-	per1_bch		149
-	gpmi_bch_apb		150
-	gpmi_bch		151
-	gpmi_io			152
-	gpmi_apb		153
-	sata			154
-	sdma			155
-	spba			156
-	ssi1			157
-	ssi2			158
-	ssi3			159
-	uart_ipg		160
-	uart_serial		161
-	usboh3			162
-	usdhc1			163
-	usdhc2			164
-	usdhc3			165
-	usdhc4			166
-	vdo_axi			167
-	vpu_axi			168
-	cko1			169
-	pll1_sys		170
-	pll2_bus		171
-	pll3_usb_otg		172
-	pll4_audio		173
-	pll5_video		174
-	pll8_mlb		175
-	pll7_usb_host		176
-	pll6_enet		177
-	ssi1_ipg		178
-	ssi2_ipg		179
-	ssi3_ipg		180
-	rom			181
-	usbphy1			182
-	usbphy2			183
-	ldb_di0_div_3_5		184
-	ldb_di1_div_3_5		185
-	sata_ref		186
-	sata_ref_100m		187
-	pcie_ref		188
-	pcie_ref_125m		189
-	enet_ref		190
-	usbphy1_gate		191
-	usbphy2_gate		192
-	pll4_post_div		193
-	pll5_post_div		194
-	pll5_video_div		195
-	eim_slow      		196
-	spdif      		197
-	cko2_sel      		198
-	cko2_podf      		199
-	cko2      		200
-	cko      		201
-	vdoa      		202
-	pll4_audio_div		203
-	lvds1_sel		204
-	lvds2_sel		205
-	lvds1_gate		206
-	lvds2_gate		207
-	esai_ahb		208
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
+for the full list of i.MX6 Quad and DualLite clock IDs.
 
 Examples:
 
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
 clks: ccm@020c4000 {
 	compatible = "fsl,imx6q-ccm";
 	reg = <0x020c4000 0x4000>;
@@ -235,7 +25,7 @@ uart1: serial@02020000 {
 	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 	reg = <0x02020000 0x4000>;
 	interrupts = <0 26 0x04>;
-	clocks = <&clks 160>, <&clks 161>;
+	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
 	clock-names = "ipg", "per";
 	status = "disabled";
 };

arch/arm/configs/imx_v4_v5_defconfig

 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -35,10 +36,8 @@ CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
 CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_IMX27LITE=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_MXT_TD60=y
-CONFIG_MACH_IMX27IPCAM=y
 CONFIG_MACH_IMX27_DT=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -159,6 +158,8 @@ CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y

arch/arm/configs/imx_v6_v7_defconfig

 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -31,11 +32,12 @@ CONFIG_MACH_IMX35_DT=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
 CONFIG_SOC_VF610=y
 CONFIG_PCI=y
 CONFIG_PCI_IMX6=y
@@ -67,6 +69,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_RFKILL=y
@@ -160,6 +164,7 @@ CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
+CONFIG_GPIO_STMPE=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@@ -242,6 +247,7 @@ CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
+CONFIG_FSL_EDMA=y
 CONFIG_STAGING=y
 CONFIG_DRM_IMX=y
 CONFIG_DRM_IMX_FB_HELPER=y
@@ -288,6 +294,7 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set

arch/arm/configs/multi_v7_defconfig

@@ -27,7 +27,7 @@ CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HI3xxx=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y

arch/arm/configs/mxs_defconfig

 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y

arch/arm/mach-imx/Kconfig

@@ -65,18 +65,8 @@ config IMX_HAVE_IOMUX_V1
 config ARCH_MXC_IOMUX_V3
 	bool
 
-config ARCH_MX1
-	bool
-
-config ARCH_MX25
-	bool
-
-config MACH_MX27
-	bool
-
 config SOC_IMX1
 	bool
-	select ARCH_MX1
 	select CPU_ARM920T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -89,7 +79,6 @@ config SOC_IMX21
 
 config SOC_IMX25
 	bool
-	select ARCH_MX25
 	select ARCH_MXC_IOMUX_V3
 	select CPU_ARM926T
 	select MXC_AVIC
@@ -100,7 +89,6 @@ config SOC_IMX27
 	select ARCH_HAS_OPP
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
-	select MACH_MX27
 	select MXC_AVIC
 	select PINCTRL_IMX27
 
@@ -119,18 +107,6 @@ config SOC_IMX35
 	select PINCTRL_IMX35
 	select SMP_ON_UP if SMP
 
-config SOC_IMX5
-	bool
-	select ARCH_HAS_OPP
-	select ARCH_MXC_IOMUX_V3
-	select MXC_TZIC
-
-config	SOC_IMX51
-	bool
-	select HAVE_IMX_SRC
-	select PINCTRL_IMX51
-	select SOC_IMX5
-
 if ARCH_MULTI_V4T
 
 comment "MX1 platforms:"
@@ -366,15 +342,6 @@ config MACH_IMX27_VISSTRIM_M10
 	  This includes specific configurations for the board and its
 	  peripherals.
 
-config MACH_IMX27LITE
-	bool "LogicPD MX27 LITEKIT platform"
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX27
-	help
-	  Include support for MX27 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
@@ -406,15 +373,6 @@ config MACH_MXT_TD60
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.
 
-config MACH_IMX27IPCAM
-	bool "IMX27 IPCAM platform"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX27
-	help
-	  Include support for IMX27 IPCAM platform. This includes specific
-	  configurations for the board and its peripherals.
-
 config MACH_IMX27_DT
 	bool "Support i.MX27 platforms from device tree"
 	select SOC_IMX27
@@ -700,24 +658,29 @@ if ARCH_MULTI_V7
 
 comment "Device tree only"
 
+config SOC_IMX5
+	bool
+	select ARCH_HAS_OPP
+	select HAVE_IMX_SRC
+	select MXC_TZIC
+
 config	SOC_IMX50
 	bool "i.MX50 support"
-	select HAVE_IMX_SRC
 	select PINCTRL_IMX50
 	select SOC_IMX5
 
 	help
 	  This enables support for Freescale i.MX50 processor.
 
-config MACH_IMX51_DT
+config SOC_IMX51
 	bool "i.MX51 support"
-	select SOC_IMX51
+	select PINCTRL_IMX51
+	select SOC_IMX5
 	help
 	  This enables support for Freescale i.MX51 processor
 
 config	SOC_IMX53
 	bool "i.MX53 support"
-	select HAVE_IMX_SRC
 	select PINCTRL_IMX53
 	select SOC_IMX5
 
@@ -734,8 +697,6 @@ config SOC_IMX6
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select MFD_SYSCON
-	select PL310_ERRATA_588369 if CACHE_L2X0
-	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
 
 config SOC_IMX6Q
@@ -771,8 +732,6 @@ config SOC_VF610
 	select ARM_GIC
 	select PINCTRL_VF610
 	select VF_PIT_TIMER
-	select PL310_ERRATA_588369 if CACHE_L2X0
-	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
 
 	help

arch/arm/mach-imx/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o \
@@ -31,6 +31,8 @@ ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
+# i.MX6SX reuses i.MX6Q cpuidle driver
+obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6q.o
 endif
 
 ifdef CONFIG_SND_IMX_SOC
@@ -38,9 +40,6 @@ obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
 
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
-
 # i.MX1 based machines
 obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
@@ -60,13 +59,11 @@ obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
 obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
 obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
-obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
 obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
 
 # i.MX31 based machines
@@ -109,8 +106,8 @@ obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
+obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
 
 obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o

arch/arm/mach-imx/clk-imx1.c

@@ -15,100 +15,103 @@
  * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx1-clock.h>
 
 #include "clk.h"
 #include "common.h"
 #include "hardware.h"
 
-/* CCM register addresses */
-#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-#define CCM_CSCR	IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
-#define CCM_PCDR	IO_ADDR_CCM(0x20)
-
-/* SCM register addresses */
-#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-#define SCM_GCCR	IO_ADDR_SCM(0xc)
-
 static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
 static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
 				       "prem", "fclk", };
 
-enum imx1_clks {
-	dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate,
-	spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko,
-	uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate,
-	usbd_gate, clk_max
-};
+static struct clk *clk[IMX1_CLK_MAX];
+static struct clk_onecell_data clk_data;
 
-static struct clk *clk[clk_max];
+static void __iomem *ccm __initdata;
+#define CCM_CSCR	(ccm + 0x0000)
+#define CCM_MPCTL0	(ccm + 0x0004)
+#define CCM_SPCTL0	(ccm + 0x000c)
+#define CCM_PCDR	(ccm + 0x0020)
+#define SCM_GCCR	(ccm + 0x0810)
 
-int __init mx1_clocks_init(unsigned long fref)
+static void __init _mx1_clocks_init(unsigned long fref)
 {
-	int i;
+	clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+	clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+	clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
+	clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+	clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+	clk[IMX1_CLK_PREM] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks));
+	clk[IMX1_CLK_MPLL] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+	clk[IMX1_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+	clk[IMX1_CLK_SPLL] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+	clk[IMX1_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+	clk[IMX1_CLK_MCU] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+	clk[IMX1_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+	clk[IMX1_CLK_HCLK] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+	clk[IMX1_CLK_CLK48M] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+	clk[IMX1_CLK_PER1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+	clk[IMX1_CLK_PER2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+	clk[IMX1_CLK_PER3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
+	clk[IMX1_CLK_CLKO] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+	clk[IMX1_CLK_UART3_GATE] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+	clk[IMX1_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+	clk[IMX1_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+	clk[IMX1_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
+	clk[IMX1_CLK_CSI_GATE] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+	clk[IMX1_CLK_MMA_GATE] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+	clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
 
-	clk[dummy] = imx_clk_fixed("dummy", 0);
-	clk[clk32] = imx_clk_fixed("clk32", fref);
-	clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
-	clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
-	clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
-	clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
-			ARRAY_SIZE(prem_sel_clks));
-	clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
-	clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
-	clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
-	clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
-	clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
-	clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
-	clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
-	clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
-	clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
-	clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
-	clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
-	clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
-			ARRAY_SIZE(clko_sel_clks));
-	clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
-	clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
-	clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
-	clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
-	clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
-	clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
-	clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+int __init mx1_clocks_init(unsigned long fref)
+{
+	ccm = MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR);
 
-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("imx1 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	_mx1_clocks_init(fref);
 
-	clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
-	clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
-	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
-	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
-	clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
-	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
-	clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
-	clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2");
-	clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
-	clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
-	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
-	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
-	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
-	clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
-	clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
-	clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
+	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
+	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
+	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
+	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
+	clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
+	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
+	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
+	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
+	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
+	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
+	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
+	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
 
 	mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
 
 	return 0;
 }
+
+static void __init mx1_clocks_init_dt(struct device_node *np)
+{
+	ccm = of_iomap(np, 0);
+	BUG_ON(!ccm);
+
+	_mx1_clocks_init(32768);
+
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx1_ccm, "fsl,imx1-ccm", mx1_clocks_init_dt);

arch/arm/mach-imx/clk-imx25.c

@@ -32,8 +32,6 @@
 #include "hardware.h"
 #include "mx25.h"
 
-#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
 #define CCM_MPCTL	0x00
 #define CCM_UPCTL	0x04
 #define CCM_CCTL	0x08
@@ -56,7 +54,7 @@
 #define CCM_LTR3	0x4c
 #define CCM_MCR		0x64
 
-#define ccm(x)	(CRM_BASE + (x))
+#define ccm(x)	(ccm_base + (x))
 
 static struct clk_onecell_data clk_data;
 
@@ -91,9 +89,10 @@ enum mx25_clks {
 
 static struct clk *clk[clk_max];
 
-static int __init __mx25_clocks_init(unsigned long osc_rate)
+static int __init __mx25_clocks_init(unsigned long osc_rate,
+				     void __iomem *ccm_base)
 {
-	int i;
+	BUG_ON(!ccm_base);
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[osc] = imx_clk_fixed("osc", osc_rate);
@@ -224,19 +223,13 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
 	/* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
 	clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
 
-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX25 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
 
 	clk_prepare_enable(clk[emi_ahb]);
 
 	/* Clock source for gpt must be derived from AHB */
 	clk_set_parent(clk[per5_sel], clk[ahb]);
 
-	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-
 	/*
 	 * Let's initially set up CLKO parent as ipg, since this configuration
 	 * is used on some imx25 board designs to clock the audio codec.
@@ -248,8 +241,14 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
 
 int __init mx25_clocks_init(void)
 {
-	__mx25_clocks_init(24000000);
+	void __iomem *ccm;
 
+	ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
+
+	__mx25_clocks_init(24000000, ccm);
+
+	clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 	/* i.mx25 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
 	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
@@ -314,29 +313,27 @@ int __init mx25_clocks_init(void)
 	return 0;
 }
 
-int __init mx25_clocks_init_dt(void)
+static void __init mx25_clocks_init_dt(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *refnp;
 	unsigned long osc_rate = 24000000;
+	void __iomem *ccm;
 
 	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
+	for_each_compatible_node(refnp, NULL, "fixed-clock") {
 		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
+		if (of_property_read_u32(refnp, "clock-frequency", &rate))
 			continue;
 
-		if (of_device_is_compatible(np, "fsl,imx-osc"))
+		if (of_device_is_compatible(refnp, "fsl,imx-osc"))
 			osc_rate = rate;
 	}
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+	ccm = of_iomap(np, 0);
+	__mx25_clocks_init(osc_rate, ccm);
+
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
-	__mx25_clocks_init(osc_rate);
-
-	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"));
-
-	return 0;
 }
+CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt);

arch/arm/mach-imx/clk-imx31.c

@@ -51,7 +51,6 @@ static struct clk_onecell_data clk_data;
 int __init mx31_clocks_init(unsigned long fref)
 {
 	void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
-	int i;
 	struct device_node *np;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -114,10 +113,7 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
 	clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
 
-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("imx31 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
 

arch/arm/mach-imx/clk-imx35.c

@@ -75,7 +75,6 @@ int __init mx35_clocks_init(void)
 	u32 pdr0, consumer_sel, hsp_sel;
 	struct arm_ahb_div *aad;
 	unsigned char *hsp_div;
-	u32 i;
 
 	pdr0 = __raw_readl(base + MXC_CCM_PDR0);
 	consumer_sel = (pdr0 >> 16) & 0xf;
@@ -200,10 +199,7 @@ int __init mx35_clocks_init(void)
 	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3,  2);
 	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3,  4);
 
-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX35 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
 
 	clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
 	clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");

arch/arm/mach-imx/clk-imx6sl.c

@@ -348,18 +348,12 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_USDHC3]       = imx_clk_gate2("usdhc3",       "usdhc3_podf",       base + 0x80, 6);
 	clks[IMX6SL_CLK_USDHC4]       = imx_clk_gate2("usdhc4",       "usdhc4_podf",       base + 0x80, 8);
 
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		if (IS_ERR(clks[i]))
-			pr_err("i.MX6SL clk %d: register failed with %ld\n",
-				i, PTR_ERR(clks[i]));
+	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
-	clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
 	/* Ensure the AHB clk is at 132MHz. */
 	ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
 	if (ret)
@@ -383,8 +377,5 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
-	mxc_timer_init_dt(np);
 }
 CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);

arch/arm/mach-imx/clk-imx6sx.c

@@ -124,6 +124,9 @@ static struct clk_div_table video_div_table[] = {
 static u32 share_count_asrc;
 static u32 share_count_audio;
 static u32 share_count_esai;
+static u32 share_count_ssi1;
+static u32 share_count_ssi2;
+static u32 share_count_ssi3;
 
 static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 {
@@ -409,12 +412,12 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
 	clks[IMX6SX_CLK_AUDIO]        = imx_clk_gate2_shared("audio",  "audio_podf",        base + 0x7c, 14, &share_count_audio);
 	clks[IMX6SX_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",  "spdif_podf",        base + 0x7c, 14, &share_count_audio);
-	clks[IMX6SX_CLK_SSI1_IPG]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
-	clks[IMX6SX_CLK_SSI2_IPG]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
-	clks[IMX6SX_CLK_SSI3_IPG]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
-	clks[IMX6SX_CLK_SSI1]         = imx_clk_gate2("ssi1",          "ssi1_podf",         base + 0x7c, 18);
-	clks[IMX6SX_CLK_SSI2]         = imx_clk_gate2("ssi2",          "ssi2_podf",         base + 0x7c, 20);
-	clks[IMX6SX_CLK_SSI3]         = imx_clk_gate2("ssi3",          "ssi3_podf",         base + 0x7c, 22);
+	clks[IMX6SX_CLK_SSI1_IPG]     = imx_clk_gate2_shared("ssi1_ipg",      "ipg",        base + 0x7c, 18, &share_count_ssi1);
+	clks[IMX6SX_CLK_SSI2_IPG]     = imx_clk_gate2_shared("ssi2_ipg",      "ipg",        base + 0x7c, 20, &share_count_ssi2);
+	clks[IMX6SX_CLK_SSI3_IPG]     = imx_clk_gate2_shared("ssi3_ipg",      "ipg",        base + 0x7c, 22, &share_count_ssi3);
+	clks[IMX6SX_CLK_SSI1]         = imx_clk_gate2_shared("ssi1",          "ssi1_podf",  base + 0x7c, 18, &share_count_ssi1);
+	clks[IMX6SX_CLK_SSI2]         = imx_clk_gate2_shared("ssi2",          "ssi2_podf",  base + 0x7c, 20, &share_count_ssi2);
+	clks[IMX6SX_CLK_SSI3]         = imx_clk_gate2_shared("ssi3",          "ssi3_podf",  base + 0x7c, 22, &share_count_ssi3);
 	clks[IMX6SX_CLK_UART_IPG]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
 	clks[IMX6SX_CLK_UART_SERIAL]  = imx_clk_gate2("uart_serial",   "uart_podf",         base + 0x7c, 26);
 	clks[IMX6SX_CLK_SAI1_IPG]     = imx_clk_gate2("sai1_ipg",      "ipg",               base + 0x7c, 28);
@@ -443,17 +446,12 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	/* mask handshake of mmdc */
 	writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
 
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		if (IS_ERR(clks[i]))
-			pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
-	clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
@@ -517,8 +515,5 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
-	mxc_timer_init_dt(np);
 }
 CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);

arch/arm/mach-imx/clk-vf610.c

@@ -295,14 +295,18 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 
 	clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1));
 
-	clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(0));
-	clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(4));
+	clk[VF610_CLK_FLEXCAN0_EN] = imx_clk_gate("flexcan0_en", "ipg_bus", CCM_CSCDR2, 11);
+	clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "flexcan0_en", CCM_CCGR0, CCM_CCGRx_CGn(0));
+	clk[VF610_CLK_FLEXCAN1_EN] = imx_clk_gate("flexcan1_en", "ipg_bus", CCM_CSCDR2, 12);
+	clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "flexcan1_en", CCM_CCGR9, CCM_CCGRx_CGn(4));
 
 	clk[VF610_CLK_DMAMUX0] = imx_clk_gate2("dmamux0", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(4));
 	clk[VF610_CLK_DMAMUX1] = imx_clk_gate2("dmamux1", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(5));
 	clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1));
 	clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2));
 
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
+
 	clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]);
 	clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2);
 	clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2);

arch/arm/mach-imx/clk.c

@@ -7,6 +7,16 @@
 
 DEFINE_SPINLOCK(imx_ccm_lock);
 
+void __init imx_check_clocks(struct clk *clks[], unsigned int count)
+{
+	unsigned i;
+
+	for (i = 0; i < count; i++)
+		if (IS_ERR(clks[i]))
+			pr_err("i.MX clk %u: register failed with %ld\n",
+			       i, PTR_ERR(clks[i]));
+}
+
 static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
 {
 	struct of_phandle_args phandle;

arch/arm/mach-imx/clk.h

@@ -6,6 +6,8 @@
 
 extern spinlock_t imx_ccm_lock;
 
+void imx_check_clocks(struct clk *clks[], unsigned int count);
+
 extern void imx_cscmr1_fixup(u32 *val);
 
 struct clk *imx_clk_pllv1(const char *name, const char *parent,
@@ -95,6 +97,13 @@ static inline struct clk *imx_clk_gate(const char *name, const char *parent,
 			shift, 0, &imx_ccm_lock);
 }
 
+static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
+		void __iomem *reg, u8 shift)
+{
+	return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+			shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
 		u8 shift, u8 width, const char **parents, int num_parents)
 {

arch/arm/mach-imx/common.h

@@ -19,6 +19,7 @@ struct pt_regs;
 struct clk;
 struct device_node;
 enum mxc_cpu_pwr_mode;
+struct of_device_id;
 
 void mx1_map_io(void);
 void mx21_map_io(void);
@@ -26,48 +27,34 @@ void mx25_map_io(void);
 void mx27_map_io(void);
 void mx31_map_io(void);
 void mx35_map_io(void);
-void mx51_map_io(void);
-void mx53_map_io(void);
 void imx1_init_early(void);
 void imx21_init_early(void);
 void imx25_init_early(void);
 void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
-void imx51_init_early(void);
-void imx53_init_early(void);
 void mxc_init_irq(void __iomem *);
-void tzic_init_irq(void __iomem *);
+void tzic_init_irq(void);
 void mx1_init_irq(void);
 void mx21_init_irq(void);
 void mx25_init_irq(void);
 void mx27_init_irq(void);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
-void mx51_init_irq(void);
-void mx53_init_irq(void);
 void imx1_soc_init(void);
 void imx21_soc_init(void);
 void imx25_soc_init(void);
 void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
-void imx51_soc_init(void);
-void imx51_init_late(void);
-void imx53_init_late(void);
 void epit_timer_init(void __iomem *base, int irq);
 void mxc_timer_init(void __iomem *, int);
-void mxc_timer_init_dt(struct device_node *);
 int mx1_clocks_init(unsigned long fref);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
 int mx25_clocks_init(void);
 int mx27_clocks_init(unsigned long fref);
 int mx31_clocks_init(unsigned long fref);
 int mx35_clocks_init(void);
-int mx51_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2);
-int mx25_clocks_init_dt(void);
-int mx27_clocks_init_dt(void);
 int mx31_clocks_init_dt(void);
 struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
@@ -75,8 +62,10 @@ void mxc_set_cpu_type(unsigned int type);
 void mxc_restart(enum reboot_mode, const char *);
 void mxc_arch_reset_init(void __iomem *);
 void mxc_arch_reset_init_dt(void);
+int mx51_revision(void);
 int mx53_revision(void);
 void imx_set_aips(void __iomem *);
+void imx_aips_allow_unprivileged_access(const char *compat);
 int mxc_device_init(void);
 void imx_set_soc_revision(unsigned int rev);
 unsigned int imx_get_soc_revision(void);
@@ -117,7 +106,7 @@ static inline void imx_scu_standby_enable(void) {}
 #endif
 void imx_src_init(void);
 void imx_gpc_init(void);
-void imx_gpc_pre_suspend(void);
+void imx_gpc_pre_suspend(bool arm_power_off);
 void imx_gpc_post_resume(void);
 void imx_gpc_mask_all(void);
 void imx_gpc_restore_all(void);
@@ -127,7 +116,7 @@ void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(void);
+void imx6q_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
 
 void imx_cpu_die(unsigned int cpu);
@@ -144,12 +133,17 @@ static inline void imx6_suspend(void __iomem *ocram_vbase) {}
 void imx6q_pm_init(void);
 void imx6dl_pm_init(void);
 void imx6sl_pm_init(void);
+void imx6sx_pm_init(void);
 void imx6q_pm_set_ccm_base(void __iomem *base);
 
 #ifdef CONFIG_PM
-void imx5_pm_init(void);
+void imx51_pm_init(void);
+void imx53_pm_init(void);
+void imx5_pm_set_ccm_base(void __iomem *base);
 #else
-static inline void imx5_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
+static inline void imx5_pm_set_ccm_base(void __iomem *base) {}
 #endif
 
 #ifdef CONFIG_NEON

arch/arm/mach-imx/cpu-imx5.c

@@ -16,6 +16,8 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "hardware.h"
 #include "common.h"
@@ -24,10 +26,26 @@ static int mx5_cpu_rev = -1;
 
 #define IIM_SREV 0x24
 
+static u32 imx5_read_srev_reg(const char *compat)
+{
+	void __iomem *iim_base;
+	struct device_node *np;
+	u32 srev;
+
+	np = of_find_compatible_node(NULL, NULL, compat);
+	iim_base = of_iomap(np, 0);
+	WARN_ON(!iim_base);
+
+	srev = readl(iim_base + IIM_SREV) & 0xff;
+
+	iounmap(iim_base);
+
+	return srev;
+}
+
 static int get_mx51_srev(void)
 {
-	void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
-	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+	u32 rev = imx5_read_srev_reg("fsl,imx51-iim");
 
 	switch (rev) {
 	case 0x0:
@@ -77,8 +95,7 @@ int __init mx51_neon_fixup(void)
 
 static int get_mx53_srev(void)
 {
-	void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
-	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+	u32 rev = imx5_read_srev_reg("fsl,imx53-iim");
 
 	switch (rev) {
 	case 0x0:

arch/arm/mach-imx/cpu.c

@@ -2,6 +2,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
 
@@ -60,6 +61,18 @@ void __init imx_set_aips(void __iomem *base)
 	__raw_writel(reg, base + 0x50);
 }
 
+void __init imx_aips_allow_unprivileged_access(
+		const char *compat)
+{
+	void __iomem *aips_base_addr;
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, compat) {
+		aips_base_addr = of_iomap(np, 0);
+		imx_set_aips(aips_base_addr);
+	}
+}
+
 struct device * __init imx_soc_device_init(void)
 {
 	struct soc_device_attribute *soc_dev_attr;

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -13,6 +13,7 @@
 
 #include "common.h"
 #include "cpuidle.h"
+#include "hardware.h"
 
 static atomic_t master = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(master_lock);
@@ -66,10 +67,11 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 int __init imx6q_cpuidle_init(void)
 {
 	/* Need to enable SCU standby for entering WAIT modes */
-	imx_scu_standby_enable();
+	if (!cpu_is_imx6sx())
+		imx_scu_standby_enable();
 
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
-	imx6q_set_int_mem_clk_lpm();
+	imx6q_set_int_mem_clk_lpm(true);
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }

arch/arm/mach-imx/devices-imx51.h

-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx51_fec_data;
-#define imx51_add_fec(pdata)	\
-	imx_add_fec(&imx51_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
-#define imx51_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
-#define imx51_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-#define imx51_add_hsi2c(pdata)	\
-	imx51_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
-#define imx51_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
-#define imx51_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
-#define imx51_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
-#define imx51_add_mxc_ehci_hs(id, pdata)	\
-	imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
-#define imx51_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
-#define imx51_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx51_cspi_data;
-#define imx51_add_cspi(pdata)	\
-	imx_add_spi_imx(&imx51_cspi_data, pdata)
-
-extern const struct imx_spi_imx_data imx51_ecspi_data[];
-#define imx51_add_ecspi(id, pdata)	\
-	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id)	\
-	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
-#define imx51_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx51_pata_imx_data;
-#define imx51_add_pata_imx() \
-	imx_add_pata_imx(&imx51_pata_imx_data)

arch/arm/mach-imx/devices/Kconfig

 config IMX_HAVE_PLATFORM_FEC
 	bool
-	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+	default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
 
 config IMX_HAVE_PLATFORM_FLEXCAN
 	bool
@@ -10,7 +10,6 @@ config IMX_HAVE_PLATFORM_FSL_USB2_UDC
 
 config IMX_HAVE_PLATFORM_GPIO_KEYS
 	bool
-	default y if SOC_IMX51
 
 config IMX_HAVE_PLATFORM_IMX21_HCD
 	bool
@@ -43,15 +42,9 @@ config IMX_HAVE_PLATFORM_IMX_SSI
 config IMX_HAVE_PLATFORM_IMX_UART
 	bool
 
-config IMX_HAVE_PLATFORM_IMX_UDC
-	bool
-
 config IMX_HAVE_PLATFORM_IPU_CORE
 	bool
 
-config IMX_HAVE_PLATFORM_MX1_CAMERA
-	bool
-
 config IMX_HAVE_PLATFORM_MX2_CAMERA
 	bool
 

arch/arm/mach-imx/devices/Makefile

@@ -16,9 +16,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o

arch/arm/mach-imx/devices/devices-common.h

@@ -176,22 +176,6 @@ struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata);
 
-#include <linux/platform_data/usb-imx_udc.h>
-struct imx_imx_udc_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq0;
-	resource_size_t irq1;
-	resource_size_t irq2;
-	resource_size_t irq3;
-	resource_size_t irq4;
-	resource_size_t irq5;
-	resource_size_t irq6;
-};
-struct platform_device *__init imx_add_imx_udc(
-		const struct imx_imx_udc_data *data,
-		const struct imxusb_platform_data *pdata);
-
 #include <linux/platform_data/video-mx3fb.h>
 #include <linux/platform_data/camera-mx3.h>
 struct imx_ipu_core_data {
@@ -208,16 +192,6 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
 		const struct imx_ipu_core_data *data,
 		struct mx3fb_platform_data *pdata);
 
-#include <linux/platform_data/camera-mx1.h>
-struct imx_mx1_camera_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx1_camera(
-		const struct imx_mx1_camera_data *data,
-		const struct mx1_camera_pdata *pdata);
-
 #include <linux/platform_data/camera-mx2.h>
 struct imx_mx2_camera_data {
 	const char *devid;

arch/arm/mach-imx/devices/platform-fec.c

@@ -35,18 +35,6 @@ const struct imx_fec_data imx35_fec_data __initconst =
 	imx_fec_data_entry_single(MX35, "imx27-fec");
 #endif
 
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx27 type fec */
-const struct imx_fec_data imx51_fec_data __initconst =
-	imx_fec_data_entry_single(MX51, "imx27-fec");
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx25 type fec */
-const struct imx_fec_data imx53_fec_data __initconst =
-	imx_fec_data_entry_single(MX53, "imx25-fec");
-#endif
-
 struct platform_device *__init imx_add_fec(
 		const struct imx_fec_data *data,
 		const struct fec_platform_data *pdata)

arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c

@@ -38,11 +38,6 @@ const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
 	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
-#endif
-
 struct platform_device *__init imx_add_fsl_usb2_udc(
 		const struct imx_fsl_usb2_udc_data *data,
 		const struct fsl_usb2_platform_data *pdata)

arch/arm/mach-imx/devices/platform-imx-i2c.c

@@ -70,32 +70,6 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
-#define imx51_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
-	imx51_imx_i2c_data_entry(0, 1),
-	imx51_imx_i2c_data_entry(1, 2),
-	{
-		.devid = "imx21-i2c",
-		.id = 2,
-		.iobase = MX51_HSI2C_DMA_BASE_ADDR,
-		.iosize = SZ_16K,
-		.irq = MX51_INT_HS_I2C,
-	},
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
-#define imx53_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
-	imx53_imx_i2c_data_entry(0, 1),
-	imx53_imx_i2c_data_entry(1, 2),
-	imx53_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
 struct platform_device *__init imx_add_imx_i2c(
 		const struct imx_imx_i2c_data *data,
 		const struct imxi2c_platform_data *pdata)

arch/arm/mach-imx/devices/platform-imx-keypad.c

@@ -41,16 +41,6 @@ const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
 	imx_imx_keypad_data_entry_single(MX35, SZ_16);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX51, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX53, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
 struct platform_device *__init imx_add_imx_keypad(
 		const struct imx_imx_keypad_data *data,
 		const struct matrix_keymap_data *pdata)

arch/arm/mach-imx/devices/platform-imx-ssi.c

@@ -66,26 +66,6 @@ const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
-#define imx51_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
-	imx51_imx_ssi_data_entry(0, 1),
-	imx51_imx_ssi_data_entry(1, 2),
-	imx51_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = {
-#define imx53_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K)
-	imx53_imx_ssi_data_entry(0, 1),
-	imx53_imx_ssi_data_entry(1, 2),
-	imx53_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
 struct platform_device *__init imx_add_imx_ssi(
 		const struct imx_imx_ssi_data *data,
 		const struct imx_ssi_platform_data *pdata)

arch/arm/mach-imx/devices/platform-imx-uart.c

@@ -94,28 +94,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
-#define imx51_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
-	imx51_imx_uart_data_entry(0, 1),
-	imx51_imx_uart_data_entry(1, 2),
-	imx51_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
-#define imx53_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K)
-	imx53_imx_uart_data_entry(0, 1),
-	imx53_imx_uart_data_entry(1, 2),
-	imx53_imx_uart_data_entry(2, 3),
-	imx53_imx_uart_data_entry(3, 4),
-	imx53_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
 struct platform_device *__init imx_add_imx_uart_3irq(
 		const struct imx_imx_uart_3irq_data *data,
 		const struct imxuart_platform_data *pdata)

arch/arm/mach-imx/devices/platform-imx2-wdt.c

@@ -45,24 +45,6 @@ const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
 	imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = {
-#define imx51_imx2_wdt_data_entry(_id, _hwid)				\
-	imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K)
-	imx51_imx2_wdt_data_entry(0, 1),
-	imx51_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = {
-#define imx53_imx2_wdt_data_entry(_id, _hwid)				\
-	imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K)
-	imx53_imx2_wdt_data_entry(0, 1),
-	imx53_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
 struct platform_device *__init imx_add_imx2_wdt(
 		const struct imx_imx2_wdt_data *data)
 {

arch/arm/mach-imx/devices/platform-imx_udc.c

-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_udc_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _USBD_BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq0 = soc ## _INT_USBD0,				\
-		.irq1 = soc ## _INT_USBD1,				\
-		.irq2 = soc ## _INT_USBD2,				\
-		.irq3 = soc ## _INT_USBD3,				\
-		.irq4 = soc ## _INT_USBD4,				\
-		.irq5 = soc ## _INT_USBD5,				\
-		.irq6 = soc ## _INT_USBD6,				\
-	}
-
-#define imx_imx_udc_data_entry(soc, _size)				\
-	[_id] = imx_imx_udc_data_entry_single(soc, _size)
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_udc_data imx1_imx_udc_data __initconst =
-	imx_imx_udc_data_entry_single(MX1, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_imx_udc(
-		const struct imx_imx_udc_data *data,
-		const struct imxusb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq0,
-			.end = data->irq0,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq1,
-			.end = data->irq1,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq2,
-			.end = data->irq2,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq3,
-			.end = data->irq3,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq4,
-			.end = data->irq4,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq5,
-			.end = data->irq5,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq6,
-			.end = data->irq6,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx_udc", 0,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}

arch/arm/mach-imx/devices/platform-mx1-camera.c

-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx1_camera_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _CSI ## _BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq = soc ## _INT_CSI,					\
-	}
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
-	imx_mx1_camera_data_entry_single(MX1, 10);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_mx1_camera(
-		const struct imx_mx1_camera_data *data,
-		const struct mx1_camera_pdata *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("mx1-camera", 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}

arch/arm/mach-imx/devices/platform-mxc-ehci.c

@@ -50,15 +50,6 @@ const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
 	imx_mxc_ehci_data_entry_single(MX35, 1, HS);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
-const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
-	imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
-	imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
 struct platform_device *__init imx_add_mxc_ehci(
 		const struct imx_mxc_ehci_data *data,
 		const struct mxc_usbh_platform_data *pdata)

arch/arm/mach-imx/devices/platform-mxc_nand.c

@@ -54,11 +54,6 @@ const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
 	imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
 #endif
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
-	imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K);
-#endif
-
 struct platform_device *__init imx_add_mxc_nand(
 		const struct imx_mxc_nand_data *data,
 		const struct mxc_nand_platform_data *pdata)

arch/arm/mach-imx/devices/platform-mxc_rnga.c

@@ -48,9 +48,6 @@ static int __init imxXX_add_mxc_rnga(void)
 #endif /* if defined(CONFIG_SOC_IMX31) */
 		ret = ERR_PTR(-ENODEV);
 
-	if (IS_ERR(ret))
-		return PTR_ERR(ret);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(ret);
 }
 arch_initcall(imxXX_add_mxc_rnga);

arch/arm/mach-imx/devices/platform-pata_imx.c

@@ -28,16 +28,6 @@ const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
 	imx_pata_imx_data_entry_single(MX35, SZ_16K);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_pata_imx_data imx51_pata_imx_data __initconst =
-	imx_pata_imx_data_entry_single(MX51, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_pata_imx_data imx53_pata_imx_data __initconst =
-	imx_pata_imx_data_entry_single(MX53, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
 struct platform_device *__init imx_add_pata_imx(
 		const struct imx_pata_imx_data *data)
 {

arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c

@@ -43,30 +43,6 @@ imx35_sdhci_esdhc_imx_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-const struct imx_sdhci_esdhc_imx_data
-imx51_sdhci_esdhc_imx_data[] __initconst = {
-#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
-	imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid)
-	imx51_sdhci_esdhc_imx_data_entry(0, 1),
-	imx51_sdhci_esdhc_imx_data_entry(1, 2),
-	imx51_sdhci_esdhc_imx_data_entry(2, 3),
-	imx51_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_sdhci_esdhc_imx_data
-imx53_sdhci_esdhc_imx_data[] __initconst = {
-#define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
-	imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid)
-	imx53_sdhci_esdhc_imx_data_entry(0, 1),
-	imx53_sdhci_esdhc_imx_data_entry(1, 2),
-	imx53_sdhci_esdhc_imx_data_entry(2, 3),
-	imx53_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
 static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
 	.wp_type = ESDHC_WP_NONE,
 	.cd_type = ESDHC_CD_NONE,

arch/arm/mach-imx/devices/platform-spi_imx.c

@@ -79,33 +79,6 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx51_cspi_data __initconst =
-	imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
-#define imx51_ecspi_data_entry(_id, _hwid)				\
-	imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
-	imx51_ecspi_data_entry(0, 1),
-	imx51_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx53_cspi_data __initconst =
-	imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-/* i.mx53 has the i.mx51 type ecspi */
-const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
-#define imx53_ecspi_data_entry(_id, _hwid)				\
-	imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
-	imx53_ecspi_data_entry(0, 1),
-	imx53_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
 struct platform_device *__init imx_add_spi_imx(
 		const struct imx_spi_imx_data *data,
 		const struct spi_imx_master *pdata)

arch/arm/mach-imx/ehci-imx25.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET	0x600

arch/arm/mach-imx/ehci-imx27.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET	0x600

arch/arm/mach-imx/ehci-imx31.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET	0x600

arch/arm/mach-imx/ehci-imx35.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET	0x600

arch/arm/mach-imx/ehci-imx5.c

-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "hardware.h"
-
-#define MXC_OTG_OFFSET			0
-#define MXC_H1_OFFSET			0x200
-#define MXC_H2_OFFSET			0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)	/* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_POL_BIT	(1 << 9)	/* OTG Polarity of Overcurrent */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_POL_BIT		(1 << 6)	/* UH1 Polarity of Overcurrent */
-#define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
-#define MXC_OTG_PHYCTRL_PWR_POL_BIT	(1 << 3)	/* OTG Power Pin Polarity */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
-
-#define MXC_USBCMD_OFFSET		0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
-
-int mx51_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-	void __iomem *usb_base;
-	void __iomem *usbotg_base;
-	void __iomem *usbother_base;
-	int ret = 0;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base) {
-		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
-		return -ENOMEM;
-	}
-
-	switch (port) {
-	case 0:	/* OTG port */
-		usbotg_base = usb_base + MXC_OTG_OFFSET;
-		break;
-	case 1:	/* Host 1 port */
-		usbotg_base = usb_base + MXC_H1_OFFSET;
-		break;
-	case 2: /* Host 2 port */
-		usbotg_base = usb_base + MXC_H2_OFFSET;
-		break;
-	default:
-		printk(KERN_ERR"%s no such port %d\n", __func__, port);
-		ret = -ENOENT;
-		goto error;
-	}
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	switch (port) {
-	case 0:	/*OTG port */
-		if (flags & MXC_EHCI_INTERNAL_PHY) {
-			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
-				v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
-			else
-				v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-				/* OC/USBPWR is used */
-				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			} else {
-				/* OC/USBPWR is not used */
-				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			}
-			if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-				v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
-			else
-				v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
-			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED)
-				v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
-			else
-				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_OTG_UCTRL_OPM_BIT;
-			else
-				v |= MXC_OTG_UCTRL_OPM_BIT;
-			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-		}
-		break;
-	case 1:	/* Host 1 */
-		/*Host ULPI */
-		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-			/* HOST1 wakeup/ULPI intr enable */
-			v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-		} else {
-			/* HOST1 wakeup/ULPI intr disable */
-			v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-		}
-
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
-		else
-			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
-		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
-			v |= MXC_H1_OC_POL_BIT;
-		else
-			v &= ~MXC_H1_OC_POL_BIT;
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
-		else
-			v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
-		__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-		v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
-		if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
-			/* Interrupt Threshold Control:Immediate (no threshold) */
-			v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
-		__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
-		break;
-	case 2: /* Host 2 ULPI */
-		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
-		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-			/* HOST1 wakeup/ULPI intr enable */
-			v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-		} else {
-			/* HOST1 wakeup/ULPI intr disable */
-			v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-		}
-
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
-		else
-			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
-		break;
-	}
-
-error:
-	iounmap(usb_base);
-	return ret;
-}
-

arch/arm/mach-imx/ehci.h

+#ifndef __MACH_IMX_EHCI_H
+#define __MACH_IMX_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
+#define MXC_EHCI_FORCE_FS		(1 << 24)
+#define MXC_EHCI_UTMI_8BIT		(0 << 28)
+#define MXC_EHCI_UTMI_16BIT		(1 << 28)
+#define MXC_EHCI_SERIAL			(1 << 29)
+#define MXC_EHCI_MODE_UTMI		(0 << 30)
+#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
+#define MXC_EHCI_MODE_ULPI		(2 << 30)
+#define MXC_EHCI_MODE_SERIAL		(3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
+#define MXC_EHCI_INTERFACE_MASK		(0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
+#define MXC_EHCI_TTL_ENABLED		(1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
+#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
+#define MXC_EHCI_IPPUE_UP		(1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED		(1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 13)
+
+#define MXC_USBCTRL_OFFSET		0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
+#define MXC_USBH2CTRL_OFFSET		0x14
+
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __MACH_IMX_EHCI_H */

arch/arm/mach-imx/gpc.c

@@ -27,13 +27,14 @@ static void __iomem *gpc_base;
 static u32 gpc_wake_irqs[IMR_NUM];
 static u32 gpc_saved_imrs[IMR_NUM];
 
-void imx_gpc_pre_suspend(void)
+void imx_gpc_pre_suspend(bool arm_power_off)
 {
 	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
 	int i;
 
 	/* Tell GPC to power off ARM core when suspend */
-	writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+	if (arm_power_off)
+		writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
 
 	for (i = 0; i < IMR_NUM; i++) {
 		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);

arch/arm/mach-imx/hardware.h

@@ -105,8 +105,6 @@
 
 #include "mxc.h"
 
-#include "mx51.h"
-#include "mx53.h"
 #include "mx3x.h"
 #include "mx31.h"
 #include "mx35.h"

arch/arm/mach-imx/imx25-dt.c

@@ -29,16 +29,10 @@ static const char * const imx25_dt_board_compat[] __initconst = {
 	NULL
 };
 
-static void __init imx25_timer_init(void)
-{
-	mx25_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.map_io		= mx25_map_io,
 	.init_early	= imx25_init_early,
 	.init_irq	= mx25_init_irq,
-	.init_time	= imx25_timer_init,
 	.init_machine	= imx25_dt_init,
 	.dt_compat	= imx25_dt_board_compat,
 	.restart	= mxc_restart,

arch/arm/mach-imx/imx27-dt.c

@@ -34,16 +34,10 @@ static const char * const imx27_dt_board_compat[] __initconst = {
 	NULL
 };
 
-static void __init imx27_timer_init(void)
-{
-	mx27_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
 	.init_irq	= mx27_init_irq,
-	.init_time	= imx27_timer_init,
 	.init_machine	= imx27_dt_init,
 	.dt_compat	= imx27_dt_board_compat,
 	.restart	= mxc_restart,

arch/arm/mach-imx/imx31-dt.c

@@ -25,7 +25,7 @@ static void __init imx31_dt_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char *imx31_dt_board_compat[] __initconst = {
+static const char * const imx31_dt_board_compat[] __initconst = {
 	"fsl,imx31",
 	NULL
 };

arch/arm/mach-imx/imx35-dt.c

@@ -34,7 +34,7 @@ static void __init imx35_irq_init(void)
 	mx35_init_irq();
 }
 
-static const char *imx35_dt_board_compat[] __initconst = {
+static const char * const imx35_dt_board_compat[] __initconst = {
 	"fsl,imx35",
 	NULL
 };

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -50,6 +50,7 @@
 #include "common.h"
 #include "devices-imx31.h"
 #include "crmregs-imx3.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-cpuimx27.c

@@ -36,6 +36,7 @@
 
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx27.h"

arch/arm/mach-imx/mach-cpuimx35.c

@@ -39,6 +39,7 @@
 
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx35.h"

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -35,6 +35,7 @@
 
 #include "common.h"
 #include "devices-imx25.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx25.h"

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -43,6 +43,7 @@
 
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 

arch/arm/mach-imx/mach-imx27ipcam.c

-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "iomux-mx27.h"
-
-static const int mx27ipcam_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static void __init mx27ipcam_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
-		"mx27ipcam");
-
-	imx27_add_imx_uart0(NULL);
-	imx27_add_fec(NULL);
-	imx27_add_imx2_wdt();
-}
-
-static void __init mx27ipcam_timer_init(void)
-{
-	mx27_clocks_init(25000000);
-}
-
-MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= mx27ipcam_timer_init,
-	.init_machine = mx27ipcam_init,
-	.restart	= mxc_restart,
-MACHINE_END

arch/arm/mach-imx/mach-imx27lite.c

-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int mx27lite_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mx27lite_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
-		"imx27lite");
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_fec(NULL);
-}
-
-static void __init mx27lite_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= mx27lite_timer_init,
-	.init_machine = mx27lite_init,
-	.restart	= mxc_restart,
-MACHINE_END

arch/arm/mach-imx/mach-imx50.c

@@ -23,14 +23,13 @@ static void __init imx50_dt_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char *imx50_dt_board_compat[] __initconst = {
+static const char * const imx50_dt_board_compat[] __initconst = {
 	"fsl,imx50",
 	NULL
 };
 
 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
-	.map_io		= mx53_map_io,
-	.init_irq	= mx53_init_irq,
+	.init_irq	= tzic_init_irq,
 	.init_machine	= imx50_dt_init,
 	.dt_compat	= imx50_dt_board_compat,
 	.restart	= mxc_restart,

arch/arm/mach-imx/imx51-dt.c → arch/arm/mach-imx/mach-imx51.c

@@ -10,6 +10,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
@@ -17,27 +18,63 @@
 #include <asm/mach/time.h>
 
 #include "common.h"
-#include "mx51.h"
+#include "hardware.h"
+
+static void __init imx51_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX51);
+}
+
+/*
+ * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
+ * the Freescale marketing division. However this did not remove the
+ * hardware from the chip which still needs to be configured for proper
+ * IPU support.
+ */
+#define MX51_MIPI_HSC_BASE 0x83fdc000
+static void __init imx51_ipu_mipi_setup(void)
+{
+	void __iomem *hsc_addr;
+
+	hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K);
+	WARN_ON(!hsc_addr);
+
+	/* setup MIPI module to legacy mode */
+	__raw_writel(0xf00, hsc_addr);
+
+	/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
+	__raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
+		hsc_addr + 0x800);
+
+	iounmap(hsc_addr);
+}
 
 static void __init imx51_dt_init(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
 
 	mxc_arch_reset_init_dt();
+	imx51_ipu_mipi_setup();
+	imx_src_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	platform_device_register_full(&devinfo);
 }
 
-static const char *imx51_dt_board_compat[] __initconst = {
+static void __init imx51_init_late(void)
+{
+	mx51_neon_fixup();
+	imx51_pm_init();
+}
+
+static const char * const imx51_dt_board_compat[] __initconst = {
 	"fsl,imx51",
 	NULL
 };
 
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
-	.map_io		= mx51_map_io,
 	.init_early	= imx51_init_early,
-	.init_irq	= mx51_init_irq,
+	.init_irq	= tzic_init_irq,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,

arch/arm/mach-imx/mach-imx53.c

@@ -22,24 +22,35 @@
 
 #include "common.h"
 #include "hardware.h"
-#include "mx53.h"
+
+static void __init imx53_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX53);
+}
 
 static void __init imx53_dt_init(void)
 {
 	mxc_arch_reset_init_dt();
+	imx_src_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	imx_aips_allow_unprivileged_access("fsl,imx53-aipstz");
+}
+
+static void __init imx53_init_late(void)
+{
+	imx53_pm_init();
 }
 
-static const char *imx53_dt_board_compat[] __initconst = {
+static const char * const imx53_dt_board_compat[] __initconst = {
 	"fsl,imx53",
 	NULL
 };
 
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
-	.map_io		= mx53_map_io,
 	.init_early	= imx53_init_early,
-	.init_irq	= mx53_init_irq,
+	.init_irq	= tzic_init_irq,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,

arch/arm/mach-imx/mach-imx6q.c

@@ -320,7 +320,7 @@ static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
 	val &= 0x3;
 
-	if (val != OCOTP_CFG3_SPEED_1P2GHZ)
+	if ((val != OCOTP_CFG3_SPEED_1P2GHZ) && cpu_is_imx6q())
 		if (dev_pm_opp_disable(cpu_dev, 1200000000))
 			pr_warn("failed to disable 1.2 GHz OPP\n");
 	if (val < OCOTP_CFG3_SPEED_996MHZ)
@@ -396,7 +396,7 @@ static void __init imx6q_init_irq(void)
 	irqchip_init();
 }
 
-static const char *imx6q_dt_compat[] __initconst = {
+static const char * const imx6q_dt_compat[] __initconst = {
 	"fsl,imx6dl",
 	"fsl,imx6q",
 	NULL,

arch/arm/mach-imx/mach-imx6sl.c

@@ -70,7 +70,7 @@ static void __init imx6sl_init_irq(void)
 	irqchip_init();
 }
 
-static const char *imx6sl_dt_compat[] __initconst = {
+static const char * const imx6sl_dt_compat[] __initconst = {
 	"fsl,imx6sl",
 	NULL,
 };

arch/arm/mach-imx/mach-imx6sx.c

@@ -12,6 +12,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "cpuidle.h"
 
 static void __init imx6sx_init_machine(void)
 {
@@ -26,6 +27,7 @@ static void __init imx6sx_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	imx_anatop_init();
+	imx6sx_pm_init();
 }
 
 static void __init imx6sx_init_irq(void)
@@ -37,7 +39,12 @@ static void __init imx6sx_init_irq(void)
 	irqchip_init();
 }
 
-static const char *imx6sx_dt_compat[] __initconst = {
+static void __init imx6sx_init_late(void)
+{
+	imx6q_cpuidle_init();
+}
+
+static const char * const imx6sx_dt_compat[] __initconst = {
 	"fsl,imx6sx",
 	NULL,
 };
@@ -47,5 +54,6 @@ DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
 	.init_irq	= imx6sx_init_irq,
 	.init_machine	= imx6sx_init_machine,
 	.dt_compat	= imx6sx_dt_compat,
+	.init_late	= imx6sx_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -39,6 +39,7 @@
 
 #include "common.h"
 #include "devices-imx25.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx25.h"
 #include "mx25.h"

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -40,6 +40,7 @@
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 #include "ulpi.h"