staging: comedi: cb_pcidas: cleanup dac08_write()

Reverse the logic of the test against the cached value so that
the function only has one exit point.

Make the logic of the dac write a bit clearer by create a local
variable for the address used in the outw() calls and masking the
value to write and setting the enable bits before doing the outw()
calls. Add a comment just to make sure it's clear.

Also, add a comment about the 'return 1;'.  This should be
insn->n which is the number of data parameters used to do the
dac08_write_insn() but the insn is not a parameter to this
function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/cb_pcidas.c

@@ -662,23 +662,25 @@ static int caldac_read_insn(struct comedi_device *dev,
 static int dac08_write(struct comedi_device *dev, unsigned int value)
 {
 	struct cb_pcidas_private *devpriv = dev->private;
+	unsigned long cal_reg;
 
-	if (devpriv->dac08_value == value)
-		return 1;
+	if (devpriv->dac08_value != value) {
+		devpriv->dac08_value = value;
 
-	devpriv->dac08_value = value;
+		cal_reg = devpriv->control_status + CALIBRATION_REG;
 
-	outw(cal_enable_bits(dev) | (value & 0xff),
-	     devpriv->control_status + CALIBRATION_REG);
-	udelay(1);
-	outw(cal_enable_bits(dev) | SELECT_DAC08_BIT | (value & 0xff),
-	     devpriv->control_status + CALIBRATION_REG);
-	udelay(1);
-	outw(cal_enable_bits(dev) | (value & 0xff),
-	     devpriv->control_status + CALIBRATION_REG);
-	udelay(1);
+		value &= 0xff;
+		value |= cal_enable_bits(dev);
 
-	return 1;
+		/* latch the new value into the caldac */
+		outw(value, cal_reg);
+		udelay(1);
+		outw(value | SELECT_DAC08_BIT, cal_reg);
+		udelay(1);
+		outw(value, cal_reg);
+		udelay(1);
+	}
+	return 1;	/* insn->n */
 }
 
 static int dac08_write_insn(struct comedi_device *dev,