Commit b474cbbb authored by Archit Taneja's avatar Archit Taneja Committed by Rob Clark

drm/msm/hdmi: 8996 PLL: Populate unprepare

Without doing anything in unprepare, the HDMI driver isn't able to
switch modes successfully. Calling set_rate with a new rate results
in an un-locked PLL.

If we reset the PLL in unprepare, the PLL is able to lock with the
new rate.
Signed-off-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
parent ffe8f53f
......@@ -670,6 +670,11 @@ static unsigned long hdmi_8996_pll_recalc_rate(struct clk_hw *hw,
static void hdmi_8996_pll_unprepare(struct clk_hw *hw)
{
struct hdmi_pll_8996 *pll = hw_clk_to_pll(hw);
struct hdmi_phy *phy = pll_get_phy(pll);
hdmi_phy_write(phy, REG_HDMI_8996_PHY_CFG, 0x6);
usleep_range(100, 150);
}
static int hdmi_8996_pll_is_enabled(struct clk_hw *hw)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment