powerpc/85xx: Add UCC6 and UCC8 nodes in SGMII mode for MPC8569MDS

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8569mds.dts

@@ -24,6 +24,8 @@ aliases {
 		ethernet1 = &enet1;
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
+		ethernet5 = &enet5;
+		ethernet7 = &enet7;
 		pci1 = &pci1;
 		rapidio0 = &rio0;
 	};
@@ -466,6 +468,37 @@ qe_phy3: ethernet-phy@03 {
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			qe_phy5: ethernet-phy@04 {
+				interrupt-parent = <&mpic>;
+				reg = <0x04>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy7: ethernet-phy@06 {
+				interrupt-parent = <&mpic>;
+				reg = <0x6>;
+				device_type = "ethernet-phy";
+			};
+		};
+		mdio@3520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3520 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			tbi0: tbi-phy@15 {
+			reg = <0x15>;
+			device_type = "tbi-phy";
+			};
+		};
+		mdio@3720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3720 0x38>;
+			compatible = "fsl,ucc-mdio";
+			tbi1: tbi-phy@17 {
+				reg = <0x17>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet2: ucc@2200 {
@@ -513,6 +546,36 @@ enet3: ucc@3200 {
 			phy-connection-type = "rgmii-id";
 		};
 
+		enet5: ucc@3400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <6>;
+			reg = <0x3400 0x200>;
+			interrupts = <41>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi0>;
+			phy-handle = <&qe_phy5>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet7: ucc@3600 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <8>;
+			reg = <0x3600 0x200>;
+			interrupts = <43>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi1>;
+			phy-handle = <&qe_phy7>;
+			phy-connection-type = "sgmii";
+		};
+
 		muram@10000 {
 			#address-cells = <1>;
 			#size-cells = <1>;