OMAP2+: use global values for the SRAM PA addresses

The SRAM PA addresses are locally defined and used at
different places, i.e. SRAM management code and idle sleep code.

The macros are now defined at a centralized place, for
easier maintenance.

Tested on N900 and Beagleboard with full RET and OFF modes,
using cpuidle and suspend.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Nishanth Menon<nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-omap2/sdrc.h

@@ -74,5 +74,4 @@ static inline u32 sms_read_reg(u16 reg)
  */
 #define SDRC_MPURATE_LOOPS		96
 
-
 #endif

arch/arm/mach-omap2/sleep34xx.S

@@ -26,6 +26,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <plat/sram.h>
 #include <mach/io.h>
 
 #include "cm.h"

arch/arm/plat-omap/include/plat/sram.h

@@ -11,6 +11,7 @@
 #ifndef __ARCH_ARM_OMAP_SRAM_H
 #define __ARCH_ARM_OMAP_SRAM_H
 
+#ifndef __ASSEMBLY__
 extern void * omap_sram_push(void * start, unsigned long size);
 extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
 
@@ -74,4 +75,14 @@ extern void omap_push_sram_idle(void);
 static inline void omap_push_sram_idle(void) {}
 #endif /* CONFIG_PM */
 
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA		0x40200000
+#define OMAP3_SRAM_PA           0x40200000
+#define OMAP4_SRAM_PA		0x40300000
+
 #endif

arch/arm/plat-omap/sram.c

@@ -41,15 +41,12 @@
 
 #define OMAP1_SRAM_PA		0x20000000
 #define OMAP1_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PA		0x40200000
-#define OMAP2_SRAM_PUB_PA	0x4020f800
+#define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
 #define OMAP2_SRAM_VA		0xfe400000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xfe400000
-#define OMAP3_SRAM_PUB_PA       0x40208000
+#define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
 #define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA		0x40300000
 #define OMAP4_SRAM_VA		0xfe400000
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)