Commit b4c2e158 authored by Måns Andersson's avatar Måns Andersson Committed by Mark Brown

regulator: tps65217: Allow DCDC1 and DCDC3 up to 3.3V

The data sheet statement that DCDC1 and DCDC3 only can be set in the range
0.9V - 1.5V refers to storage on its internal EEPROM and therefore cold boot
configuration. After power-on the device can be reconfigured over i2c and
DCDC1/3 set up to 3.3V.
Signed-off-by: default avatarMåns Andersson <mans.andersson@nibe.se>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent d00b7461
......@@ -179,7 +179,8 @@ static const struct regulator_desc regulators[] = {
TPS65217_REGULATOR("DCDC1", TPS65217_DCDC_1, "dcdc1",
tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC1,
TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC1_EN,
NULL, tps65217_uv1_ranges, 2, TPS65217_REG_SEQ1,
NULL, tps65217_uv1_ranges,
ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ1,
TPS65217_SEQ1_DC1_SEQ_MASK),
TPS65217_REGULATOR("DCDC2", TPS65217_DCDC_2, "dcdc2",
tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC2,
......@@ -190,7 +191,8 @@ static const struct regulator_desc regulators[] = {
TPS65217_REGULATOR("DCDC3", TPS65217_DCDC_3, "dcdc3",
tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC3,
TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC3_EN,
NULL, tps65217_uv1_ranges, 1, TPS65217_REG_SEQ2,
NULL, tps65217_uv1_ranges,
ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ2,
TPS65217_SEQ2_DC3_SEQ_MASK),
TPS65217_REGULATOR("LDO1", TPS65217_LDO_1, "ldo1",
tps65217_pmic_ldo1_ops, 16, TPS65217_REG_DEFLDO1,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment