rtl8xxxu: Pass tx_info to fill_txdesc in order to have access to retry count

In order to obtain retry count for a given rate we need to pass the
full struct ieee80211_tx_info to the function setting the rate in he
TX descriptor.

This uncovered a huge bug where the old code would use struct
ieee80211_rate.flags to test for rate parameters, which is always
zero, instead of the flags value from struct ieee80211_tx_rate.

Time to find a brown paper bag :(
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h

@@ -1337,10 +1337,11 @@ struct rtl8xxxu_fileops {
 				  u32 ramask, int sgi);
 	void (*report_connect) (struct rtl8xxxu_priv *priv,
 				u8 macid, bool connect);
-	void (*fill_txdesc) (struct ieee80211_hdr *hdr,
-			     struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
-			     u16 rate_flag, bool sgi, bool short_preamble,
-			     bool ampdu_enable, u32 rts_rate);
+	void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			     struct ieee80211_tx_info *tx_info,
+			     struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+			     bool short_preamble, bool ampdu_enable,
+			     u32 rts_rate);
 	int writeN_block_size;
 	int rx_agg_buf_size;
 	char tx_desc_size;
@@ -1434,14 +1435,16 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb);
 int rtl8xxxu_gen2_channel_to_group(int channel);
 bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
 				      int result[][8], int c1, int c2);
-void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
-			     struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
-			     u16 rate_flag, bool sgi, bool short_preamble,
-			     bool ampdu_enable, u32 rts_rate);
-void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
-			     struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
-			     u16 rate_flag, bool sgi, bool short_preamble,
-			     bool ampdu_enable, u32 rts_rate);
+void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			     struct ieee80211_tx_info *tx_info,
+			     struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+			     bool short_preamble, bool ampdu_enable,
+			     u32 rts_rate);
+void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			     struct ieee80211_tx_info *tx_info,
+			     struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
+			     bool short_preamble, bool ampdu_enable,
+			     u32 rts_rate);
 
 extern struct rtl8xxxu_fileops rtl8192cu_fops;
 extern struct rtl8xxxu_fileops rtl8192eu_fops;

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c

@@ -4759,13 +4759,28 @@ static void rtl8xxxu_dump_action(struct device *dev,
  * This format is used on 8188cu/8192cu/8723au
  */
 void
-rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
-			struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
-			u16 rate_flag, bool sgi, bool short_preamble,
-			bool ampdu_enable, u32 rts_rate)
+rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			struct ieee80211_tx_info *tx_info,
+			struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+			bool short_preamble, bool ampdu_enable, u32 rts_rate)
 {
+	struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	u32 rate;
+	u16 rate_flags = tx_info->control.rates[0].flags;
 	u16 seq_number;
 
+	if (rate_flags & IEEE80211_TX_RC_MCS &&
+	    !ieee80211_is_mgmt(hdr->frame_control))
+		rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
+	else
+		rate = tx_rate->hw_value;
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
+		dev_info(dev, "%s: TX rate: %d, pkt size %d\n",
+			 __func__, rate, cpu_to_le16(tx_desc->pkt_size));
+
 	seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
 
 	tx_desc->txdw5 = cpu_to_le32(rate);
@@ -4800,10 +4815,10 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
 	 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
 	 */
 	tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT);
-	if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
+	if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
 		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
-	} else if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+	} else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
 		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_CTS_SELF_ENABLE);
 		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
 	}
@@ -4814,16 +4829,31 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
  * This format is used on 8192eu/8723bu
  */
 void
-rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
-			struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
-			u16 rate_flag, bool sgi, bool short_preamble,
-			bool ampdu_enable, u32 rts_rate)
+rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			struct ieee80211_tx_info *tx_info,
+			struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
+			bool short_preamble, bool ampdu_enable, u32 rts_rate)
 {
+	struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
 	struct rtl8xxxu_txdesc40 *tx_desc40;
+	u32 rate;
+	u16 rate_flags = tx_info->control.rates[0].flags;
 	u16 seq_number;
 
 	tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
 
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
+		dev_info(dev, "%s: TX rate: %d, pkt size %d\n",
+			 __func__, rate, cpu_to_le16(tx_desc40->pkt_size));
+
+	if (rate_flags & IEEE80211_TX_RC_MCS &&
+	    !ieee80211_is_mgmt(hdr->frame_control))
+		rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
+	else
+		rate = tx_rate->hw_value;
+
 	seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
 
 	tx_desc40->txdw4 = cpu_to_le32(rate);
@@ -4854,10 +4884,10 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
 	/*
 	 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
 	 */
-	if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
+	if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 		tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
 		tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
-	} else if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+	} else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
 		/*
 		 * For some reason the vendor driver doesn't set
 		 * TXDESC40_HW_RTS_ENABLE for CTS to SELF
@@ -4872,14 +4902,13 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct rtl8xxxu_txdesc32 *tx_desc;
 	struct rtl8xxxu_tx_urb *tx_urb;
 	struct ieee80211_sta *sta = NULL;
 	struct ieee80211_vif *vif = tx_info->control.vif;
 	struct device *dev = &priv->udev->dev;
-	u32 queue, rate, rts_rate;
+	u32 queue, rts_rate;
 	u16 pktlen = skb->len;
 	u16 seq_number;
 	u16 rate_flag = tx_info->control.rates[0].flags;
@@ -4906,10 +4935,6 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
 		goto error;
 	}
 
-	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
-		dev_info(dev, "%s: TX rate: %d (%d), pkt size %d\n",
-			 __func__, tx_rate->bitrate, tx_rate->hw_value, pktlen);
-
 	if (ieee80211_is_action(hdr->frame_control))
 		rtl8xxxu_dump_action(dev, hdr);
 
@@ -4963,12 +4988,6 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
 		}
 	}
 
-	if (rate_flag & IEEE80211_TX_RC_MCS &&
-	    !ieee80211_is_mgmt(hdr->frame_control))
-		rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
-	else
-		rate = tx_rate->hw_value;
-
 	if (rate_flag & IEEE80211_TX_RC_SHORT_GI ||
 	    (ieee80211_is_data_qos(hdr->frame_control) &&
 	     sta && sta->ht_cap.cap &
@@ -4988,8 +5007,8 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
 
 	seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
 
-	priv->fops->fill_txdesc(hdr, tx_desc, rate, rate_flag, sgi,
-				short_preamble, ampdu_enable, rts_rate);
+	priv->fops->fill_txdesc(hw, hdr, tx_info, tx_desc, sgi, short_preamble,
+				ampdu_enable, rts_rate);
 
 	rtl8xxxu_calc_tx_desc_csum(tx_desc);