Merge tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Switch pwm_bl and corgi_lcd drivers to use GPIO descriptors"

* tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: corgi: Convert to use GPIO descriptors
  backlight: pwm_bl: Switch to full GPIO descriptor

arch/arm/mach-pxa/cm-x300.c

@@ -312,7 +312,6 @@ static struct pwm_lookup cm_x300_pwm_lookup[] = {
 static struct platform_pwm_backlight_data cm_x300_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device cm_x300_backlight_device = {

arch/arm/mach-pxa/colibri-pxa270-income.c

@@ -202,7 +202,6 @@ static struct pwm_lookup income_pwm_lookup[] = {
 static struct platform_pwm_backlight_data income_backlight_data = {
 	.max_brightness	= 0x3ff,
 	.dft_brightness	= 0x1ff,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device income_backlight = {

arch/arm/mach-pxa/corgi.c

@@ -563,13 +563,20 @@ static void corgi_bl_kick_battery(void)
 	}
 }
 
+static struct gpiod_lookup_table corgi_lcdcon_gpio_table = {
+	.dev_id = "spi1.1",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_BACKLIGHT_CONT,
+			    "BL_CONT", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 	.init_mode		= CORGI_LCD_MODE_VGA,
 	.max_intensity		= 0x2f,
 	.default_intensity	= 0x1f,
 	.limit_mask		= 0x0b,
-	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
-	.gpio_backlight_on	= -1,
 	.kick_battery		= corgi_bl_kick_battery,
 };
 
@@ -609,6 +616,7 @@ static struct spi_board_info corgi_spi_devices[] = {
 static void __init corgi_init_spi(void)
 {
 	pxa2xx_set_spi_info(1, &corgi_spi_info);
+	gpiod_add_lookup_table(&corgi_lcdcon_gpio_table);
 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
 }
 #else

arch/arm/mach-pxa/ezx.c

@@ -55,7 +55,6 @@ static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device ezx_backlight_device = {

arch/arm/mach-pxa/hx4700.c

@@ -556,7 +556,6 @@ static struct platform_device hx4700_lcd = {
 static struct platform_pwm_backlight_data backlight_data = {
 	.max_brightness = 200,
 	.dft_brightness = 100,
-	.enable_gpio    = -1,
 };
 
 static struct platform_device backlight = {

arch/arm/mach-pxa/lpd270.c

@@ -277,7 +277,6 @@ static struct pwm_lookup lpd270_pwm_lookup[] = {
 static struct platform_pwm_backlight_data lpd270_backlight_data = {
 	.max_brightness	= 1,
 	.dft_brightness	= 1,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device lpd270_backlight_device = {

arch/arm/mach-pxa/magician.c

@@ -401,7 +401,6 @@ static void magician_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data backlight_data = {
 	.max_brightness	= 272,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 	.init		= magician_backlight_init,
 	.notify		= magician_backlight_notify,
 	.exit		= magician_backlight_exit,

arch/arm/mach-pxa/mainstone.c

@@ -256,7 +256,6 @@ static struct pwm_lookup mainstone_pwm_lookup[] = {
 static struct platform_pwm_backlight_data mainstone_backlight_data = {
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device mainstone_backlight_device = {

arch/arm/mach-pxa/mioa701.c

@@ -176,7 +176,6 @@ static struct pwm_lookup mioa701_pwm_lookup[] = {
 static struct platform_pwm_backlight_data mioa701_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 50,
-	.enable_gpio	= -1,
 };
 
 /*

arch/arm/mach-pxa/palm27x.c

@@ -318,7 +318,6 @@ static void palm27x_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data palm27x_backlight_data = {
 	.max_brightness	= 0xfe,
 	.dft_brightness	= 0x7e,
-	.enable_gpio	= -1,
 	.init		= palm27x_backlight_init,
 	.notify		= palm27x_backlight_notify,
 	.exit		= palm27x_backlight_exit,

arch/arm/mach-pxa/palmtc.c

@@ -174,6 +174,15 @@ static inline void palmtc_keys_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+
+static struct gpiod_lookup_table palmtc_pwm_bl_gpio_table = {
+	.dev_id = "pwm-backlight.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_BL_POWER,
+			    "enable", GPIO_ACTIVE_HIGH),
+	},
+};
+
 static struct pwm_lookup palmtc_pwm_lookup[] = {
 	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
 		   PWM_POLARITY_NORMAL),
@@ -182,7 +191,6 @@ static struct pwm_lookup palmtc_pwm_lookup[] = {
 static struct platform_pwm_backlight_data palmtc_backlight_data = {
 	.max_brightness	= PALMTC_MAX_INTENSITY,
 	.dft_brightness	= PALMTC_MAX_INTENSITY,
-	.enable_gpio	= GPIO_NR_PALMTC_BL_POWER,
 };
 
 static struct platform_device palmtc_backlight = {
@@ -195,6 +203,7 @@ static struct platform_device palmtc_backlight = {
 
 static void __init palmtc_pwm_init(void)
 {
+	gpiod_add_lookup_table(&palmtc_pwm_bl_gpio_table);
 	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
 	platform_device_register(&palmtc_backlight);
 }

arch/arm/mach-pxa/palmte2.c

@@ -175,7 +175,6 @@ static void palmte2_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
 	.max_brightness	= PALMTE2_MAX_INTENSITY,
 	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.enable_gpio	= -1,
 	.init		= palmte2_backlight_init,
 	.notify		= palmte2_backlight_notify,
 	.exit		= palmte2_backlight_exit,

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -154,7 +154,6 @@ static struct pwm_lookup pcm990_pwm_lookup[] = {
 static struct platform_pwm_backlight_data pcm990_backlight_data = {
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device pcm990_backlight_device = {

arch/arm/mach-pxa/spitz.c

@@ -525,13 +525,33 @@ static void spitz_bl_kick_battery(void)
 	}
 }
 
+static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
+	.dev_id = "spi2.1",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
+			    "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
+			    "BL_ON", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
+	.dev_id = "spi2.1",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
+			    "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
+			    "BL_ON", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.init_mode		= CORGI_LCD_MODE_VGA,
 	.max_intensity		= 0x2f,
 	.default_intensity	= 0x1f,
 	.limit_mask		= 0x0b,
-	.gpio_backlight_cont	= SPITZ_GPIO_BACKLIGHT_CONT,
-	.gpio_backlight_on	= SPITZ_GPIO_BACKLIGHT_ON,
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
@@ -574,12 +594,10 @@ static struct pxa2xx_spi_controller spitz_spi_info = {
 
 static void __init spitz_spi_init(void)
 {
-	struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
-
-	if (machine_is_akita()) {
-		lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
-		lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
-	}
+	if (machine_is_akita())
+		gpiod_add_lookup_table(&akita_lcdcon_gpio_table);
+	else
+		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));

arch/arm/mach-pxa/tavorevb.c

@@ -178,13 +178,11 @@ static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
 		/* primary backlight */
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* secondary backlight */
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.enable_gpio	= -1,
 	},
 };
 

arch/arm/mach-pxa/viper.c

@@ -404,7 +404,6 @@ static void viper_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data viper_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 	.init		= viper_backlight_init,
 	.notify		= viper_backlight_notify,
 	.exit		= viper_backlight_exit,

arch/arm/mach-pxa/z2.c

@@ -210,13 +210,11 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = {
 		/* Keypad Backlight */
 		.max_brightness	= 1023,
 		.dft_brightness	= 0,
-		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* LCD Backlight */
 		.max_brightness	= 1023,
 		.dft_brightness	= 512,
-		.enable_gpio	= -1,
 	},
 };
 

arch/arm/mach-pxa/zylonite.c

@@ -117,7 +117,6 @@ static struct pwm_lookup zylonite_pwm_lookup[] = {
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device zylonite_backlight_device = {

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -516,7 +516,6 @@ static void h1940_backlight_exit(struct device *dev)
 static struct platform_pwm_backlight_data backlight_data = {
 	.max_brightness = 100,
 	.dft_brightness = 50,
-	.enable_gpio    = -1,
 	.init           = h1940_backlight_init,
 	.notify		= h1940_backlight_notify,
 	.exit           = h1940_backlight_exit,

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -534,7 +534,6 @@ static int rx1950_backlight_notify(struct device *dev, int brightness)
 static struct platform_pwm_backlight_data rx1950_backlight_data = {
 	.max_brightness = 24,
 	.dft_brightness = 4,
-	.enable_gpio = -1,
 	.init = rx1950_backlight_init,
 	.notify = rx1950_backlight_notify,
 	.exit = rx1950_backlight_exit,

arch/arm/mach-s3c64xx/dev-backlight.c

@@ -65,7 +65,6 @@ static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
 	.plat_data = {
 		.max_brightness = 255,
 		.dft_brightness = 255,
-		.enable_gpio    = -1,
 		.init           = samsung_bl_init,
 		.exit           = samsung_bl_exit,
 	},
@@ -111,8 +110,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
 	if (bl_data->lth_brightness)
 		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->enable_gpio >= 0)
-		samsung_bl_data->enable_gpio = bl_data->enable_gpio;
 	if (bl_data->init)
 		samsung_bl_data->init = bl_data->init;
 	if (bl_data->notify)

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -114,7 +114,6 @@ static struct pwm_lookup crag6410_pwm_lookup[] = {
 static struct platform_pwm_backlight_data crag6410_backlight_data = {
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.enable_gpio	= -1,
 };
 
 static struct platform_device crag6410_backlight_device = {

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -115,7 +115,6 @@ static void hmt_bl_exit(struct device *dev)
 static struct platform_pwm_backlight_data hmt_backlight_data = {
 	.max_brightness	= 100 * 256,
 	.dft_brightness	= 40 * 256,
-	.enable_gpio	= -1,
 	.init		= hmt_bl_init,
 	.notify		= hmt_bl_notify,
 	.exit		= hmt_bl_exit,

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -150,7 +150,6 @@ static int smartq_bl_init(struct device *dev)
 static struct platform_pwm_backlight_data smartq_backlight_data = {
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.enable_gpio	= -1,
 	.init		= smartq_bl_init,
 };
 

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -623,7 +623,7 @@ static struct pwm_lookup smdk6410_pwm_lookup[] = {
 };
 
 static struct platform_pwm_backlight_data smdk6410_bl_data = {
-	.enable_gpio = -1,
+	/* Intentionally blank */
 };
 
 static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;

arch/unicore32/kernel/puv3-nb0916.c

@@ -55,7 +55,6 @@ static struct pwm_lookup nb0916_pwm_lookup[] = {
 static struct platform_pwm_backlight_data nb0916_backlight_data = {
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.enable_gpio	= -1,
 };
 
 static struct gpio_keys_button nb0916_gpio_keys[] = {

drivers/video/backlight/corgi_lcd.c

@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/fb.h>
 #include <linux/lcd.h>
 #include <linux/spi/spi.h>
@@ -90,9 +90,8 @@ struct corgi_lcd {
 	int	mode;
 	char	buf[2];
 
-	int	gpio_backlight_on;
-	int	gpio_backlight_cont;
-	int	gpio_backlight_cont_inverted;
+	struct gpio_desc *backlight_on;
+	struct gpio_desc *backlight_cont;
 
 	void (*kick_battery)(void);
 };
@@ -403,13 +402,13 @@ static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
 	corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity);
 
 	/* Bit 5 via GPIO_BACKLIGHT_CONT */
-	cont = !!(intensity & 0x20) ^ lcd->gpio_backlight_cont_inverted;
+	cont = !!(intensity & 0x20);
 
-	if (gpio_is_valid(lcd->gpio_backlight_cont))
-		gpio_set_value_cansleep(lcd->gpio_backlight_cont, cont);
+	if (lcd->backlight_cont)
+		gpiod_set_value_cansleep(lcd->backlight_cont, cont);
 
-	if (gpio_is_valid(lcd->gpio_backlight_on))
-		gpio_set_value_cansleep(lcd->gpio_backlight_on, intensity);
+	if (lcd->backlight_on)
+		gpiod_set_value_cansleep(lcd->backlight_on, intensity);
 
 	if (lcd->kick_battery)
 		lcd->kick_battery();
@@ -482,48 +481,17 @@ static int setup_gpio_backlight(struct corgi_lcd *lcd,
 				struct corgi_lcd_platform_data *pdata)
 {
 	struct spi_device *spi = lcd->spi_dev;
-	int err;
-
-	lcd->gpio_backlight_on = -1;
-	lcd->gpio_backlight_cont = -1;
-
-	if (gpio_is_valid(pdata->gpio_backlight_on)) {
-		err = devm_gpio_request(&spi->dev, pdata->gpio_backlight_on,
-					"BL_ON");
-		if (err) {
-			dev_err(&spi->dev,
-				"failed to request GPIO%d for backlight_on\n",
-				pdata->gpio_backlight_on);
-			return err;
-		}
-
-		lcd->gpio_backlight_on = pdata->gpio_backlight_on;
-		gpio_direction_output(lcd->gpio_backlight_on, 0);
-	}
 
-	if (gpio_is_valid(pdata->gpio_backlight_cont)) {
-		err = devm_gpio_request(&spi->dev, pdata->gpio_backlight_cont,
-					"BL_CONT");
-		if (err) {
-			dev_err(&spi->dev,
-				"failed to request GPIO%d for backlight_cont\n",
-				pdata->gpio_backlight_cont);
-			return err;
-		}
-
-		lcd->gpio_backlight_cont = pdata->gpio_backlight_cont;
-
-		/* spitz and akita use both GPIOs for backlight, and
-		 * have inverted polarity of GPIO_BACKLIGHT_CONT
-		 */
-		if (gpio_is_valid(lcd->gpio_backlight_on)) {
-			lcd->gpio_backlight_cont_inverted = 1;
-			gpio_direction_output(lcd->gpio_backlight_cont, 1);
-		} else {
-			lcd->gpio_backlight_cont_inverted = 0;
-			gpio_direction_output(lcd->gpio_backlight_cont, 0);
-		}
-	}
+	lcd->backlight_on = devm_gpiod_get_optional(&spi->dev,
+						    "BL_ON", GPIOD_OUT_LOW);
+	if (IS_ERR(lcd->backlight_on))
+		return PTR_ERR(lcd->backlight_on);
+
+	lcd->backlight_cont = devm_gpiod_get_optional(&spi->dev, "BL_CONT",
+						      GPIOD_OUT_LOW);
+	if (IS_ERR(lcd->backlight_cont))
+		return PTR_ERR(lcd->backlight_cont);
+
 	return 0;
 }
 

drivers/video/backlight/pwm_bl.c

@@ -7,7 +7,6 @@
 
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -258,8 +257,6 @@ static int pwm_backlight_parse_dt(struct device *dev,
 			     &data->post_pwm_on_delay);
 	of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay);
 
-	data->enable_gpio = -EINVAL;
-
 	/*
 	 * Determine the number of brightness levels, if this property is not
 	 * set a default table of brightness levels will be used.
@@ -502,22 +499,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 		goto err_alloc;
 	}
 
-	/*
-	 * Compatibility fallback for drivers still using the integer GPIO
-	 * platform data. Must go away soon.
-	 */
-	if (!pb->enable_gpio && gpio_is_valid(data->enable_gpio)) {
-		ret = devm_gpio_request_one(&pdev->dev, data->enable_gpio,
-					    GPIOF_OUT_INIT_HIGH, "enable");
-		if (ret < 0) {
-			dev_err(&pdev->dev, "failed to request GPIO#%d: %d\n",
-				data->enable_gpio, ret);
-			goto err_alloc;
-		}
-
-		pb->enable_gpio = gpio_to_desc(data->enable_gpio);
-	}
-
 	/*
 	 * If the GPIO is not known to be already configured as output, that
 	 * is, if gpiod_get_direction returns either 1 or -EINVAL, change the

include/linux/pwm_backlight.h

@@ -16,8 +16,6 @@ struct platform_pwm_backlight_data {
 	unsigned int *levels;
 	unsigned int post_pwm_on_delay;
 	unsigned int pwm_off_delay;
-	/* TODO remove once all users are switched to gpiod_* API */
-	int enable_gpio;
 	int (*init)(struct device *dev);
 	int (*notify)(struct device *dev, int brightness);
 	void (*notify_after)(struct device *dev, int brightness);

include/linux/spi/corgi_lcd.h

@@ -11,9 +11,6 @@ struct corgi_lcd_platform_data {
 	int	default_intensity;
 	int	limit_mask;
 
-	int	gpio_backlight_on;	/* -1 if n/a */
-	int	gpio_backlight_cont;	/* -1 if n/a */
-
 	void (*notify)(int intensity);
 	void (*kick_battery)(void);
 };