Commit b5e79e6e authored by Aaro Koskinen's avatar Aaro Koskinen Committed by Greg Kroah-Hartman

staging: octeon-usb: refactor usbn block init

Move one-time state data structure initialization out of
cvmx_usb_initialize().

This enables to re-initialize USBN HW block without messing
up data structures.
Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 532edc93
......@@ -613,31 +613,14 @@ static inline int cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
* other access to the Octeon USB port is made. The port starts
* off in the disabled state.
*
* @usb: Pointer to an empty struct cvmx_usb_state
* that will be populated by the initialize call.
* This structure is then passed to all other USB
* functions.
* @usb_port_number:
* Which Octeon USB port to initialize.
* @usb: Pointer to struct cvmx_usb_state.
*
* Returns: 0 or a negative error code.
*/
static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
int usb_port_number,
enum cvmx_usb_initialize_flags flags)
static int cvmx_usb_initialize(struct cvmx_usb_state *usb)
{
union cvmx_usbnx_clk_ctl usbn_clk_ctl;
union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
int i;
memset(usb, 0, sizeof(*usb));
usb->init_flags = flags;
/* Initialize the USB state structure */
usb->index = usb_port_number;
INIT_LIST_HEAD(&usb->idle_pipes);
for (i = 0; i < ARRAY_SIZE(usb->active_pipes); i++)
INIT_LIST_HEAD(&usb->active_pipes[i]);
/*
* Power On Reset and PHY Initialization
......@@ -672,7 +655,8 @@ static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
/* From CN52XX manual */
usbn_clk_ctl.s.p_rtype = 1;
switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
switch (usb->init_flags &
CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
usbn_clk_ctl.s.p_c_sel = 0;
break;
......@@ -791,20 +775,9 @@ static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
*/
{
union cvmx_usbcx_gahbcfg usbcx_gahbcfg;
/* Due to an errata, CN31XX doesn't support DMA */
if (OCTEON_IS_MODEL(OCTEON_CN31XX))
usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
usbcx_gahbcfg.u32 = 0;
usbcx_gahbcfg.s.dmaen = !(usb->init_flags &
CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
/* Only use one channel with non DMA */
usb->idle_hardware_channels = 0x1;
else if (OCTEON_IS_MODEL(OCTEON_CN5XXX))
/* CN5XXX have an errata with channel 3 */
usb->idle_hardware_channels = 0xf7;
else
usb->idle_hardware_channels = 0xff;
usbcx_gahbcfg.s.hbstlen = 0;
usbcx_gahbcfg.s.nptxfemplvl = 1;
usbcx_gahbcfg.s.ptxfemplvl = 1;
......@@ -3709,7 +3682,27 @@ static int octeon_usb_probe(struct platform_device *pdev)
spin_lock_init(&priv->lock);
status = cvmx_usb_initialize(&priv->usb, usb_num, initialize_flags);
priv->usb.init_flags = initialize_flags;
/* Initialize the USB state structure */
priv->usb.index = usb_num;
INIT_LIST_HEAD(&priv->usb.idle_pipes);
for (i = 0; i < ARRAY_SIZE(priv->usb.active_pipes); i++)
INIT_LIST_HEAD(&priv->usb.active_pipes[i]);
/* Due to an errata, CN31XX doesn't support DMA */
if (OCTEON_IS_MODEL(OCTEON_CN31XX)) {
priv->usb.init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
/* Only use one channel with non DMA */
priv->usb.idle_hardware_channels = 0x1;
} else if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) {
/* CN5XXX have an errata with channel 3 */
priv->usb.idle_hardware_channels = 0xf7;
} else {
priv->usb.idle_hardware_channels = 0xff;
}
status = cvmx_usb_initialize(&priv->usb);
if (status) {
dev_dbg(dev, "USB initialization failed with %d\n", status);
kfree(hcd);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment