net: hns3: add hclge_cmd_check_retval() to parse comman's return value

For simplifying the code, this patch adds hclge_cmd_check_retval() to
check the return value of the command.

Also, according the IMP's description, when there are several descriptors
in a command, then the IMP will save the return value on the last
description, so hclge_cmd_check_retval() just check the last one for this
case.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c

@@ -186,6 +186,38 @@ static bool hclge_is_special_opcode(u16 opcode)
 	return false;
 }
 
+static int hclge_cmd_check_retval(struct hclge_hw *hw, struct hclge_desc *desc,
+				  int num, int ntc)
+{
+	u16 opcode, desc_ret;
+	int handle;
+	int retval;
+
+	opcode = le16_to_cpu(desc[0].opcode);
+	for (handle = 0; handle < num; handle++) {
+		desc[handle] = hw->cmq.csq.desc[ntc];
+		ntc++;
+		if (ntc == hw->cmq.csq.desc_num)
+			ntc = 0;
+	}
+	if (likely(!hclge_is_special_opcode(opcode)))
+		desc_ret = le16_to_cpu(desc[num - 1].retval);
+	else
+		desc_ret = le16_to_cpu(desc[0].retval);
+
+	if (desc_ret == HCLGE_CMD_EXEC_SUCCESS)
+		retval = 0;
+	else if (desc_ret == HCLGE_CMD_NO_AUTH)
+		retval = -EPERM;
+	else if (desc_ret == HCLGE_CMD_NOT_SUPPORTED)
+		retval = -EOPNOTSUPP;
+	else
+		retval = -EIO;
+	hw->cmq.last_status = desc_ret;
+
+	return retval;
+}
+
 /**
  * hclge_cmd_send - send command to command queue
  * @hw: pointer to the hw struct
@@ -203,7 +235,6 @@ int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num)
 	u32 timeout = 0;
 	int handle = 0;
 	int retval = 0;
-	u16 opcode, desc_ret;
 	int ntc;
 
 	spin_lock_bh(&hw->cmq.csq.lock);
@@ -219,7 +250,6 @@ int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num)
 	 * which will be use for hardware to write back
 	 */
 	ntc = hw->cmq.csq.next_to_use;
-	opcode = le16_to_cpu(desc[0].opcode);
 	while (handle < num) {
 		desc_to_use = &hw->cmq.csq.desc[hw->cmq.csq.next_to_use];
 		*desc_to_use = desc[handle];
@@ -250,31 +280,7 @@ int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num)
 	if (!complete) {
 		retval = -EAGAIN;
 	} else {
-		handle = 0;
-		while (handle < num) {
-			/* Get the result of hardware write back */
-			desc_to_use = &hw->cmq.csq.desc[ntc];
-			desc[handle] = *desc_to_use;
-
-			if (likely(!hclge_is_special_opcode(opcode)))
-				desc_ret = le16_to_cpu(desc[handle].retval);
-			else
-				desc_ret = le16_to_cpu(desc[0].retval);
-
-			if (desc_ret == HCLGE_CMD_EXEC_SUCCESS)
-				retval = 0;
-			else if (desc_ret == HCLGE_CMD_NO_AUTH)
-				retval = -EPERM;
-			else if (desc_ret == HCLGE_CMD_NOT_SUPPORTED)
-				retval = -EOPNOTSUPP;
-			else
-				retval = -EIO;
-			hw->cmq.last_status = desc_ret;
-			ntc++;
-			handle++;
-			if (ntc == hw->cmq.csq.desc_num)
-				ntc = 0;
-		}
+		retval = hclge_cmd_check_retval(hw, desc, num, ntc);
 	}
 
 	/* Clean the command send queue */