Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: fix wireless drivers depends
  Staging: wireless drivers Kconfig change
  Staging: android: mark subsystem as broken
  Staging: remove stlc45xx driver
  Staging: rtl8187se/rtl8192e/rtl8192su: allow module unload
  Staging: vt6656: fix the memory free bug in vntwusb_disconnect()
  Staging: Panel: prevent driver from calling misc_deregister twice on same ressource
  Staging: hv: fix oops in vmbus - missing #include
  Staging: hv: fix oops in vmbus - netvsc list_head
  Staging: hv: fix oops in vmbus - udev events
  Staging: hv: Fix vmbus load hang caused by faulty data packing
  Staging: hv: Fix null pointer error after vmbus loading
  Staging: hv TODO patches

drivers/staging/Kconfig

@@ -93,8 +93,6 @@ source "drivers/staging/dst/Kconfig"
 
 source "drivers/staging/pohmelfs/Kconfig"
 
-source "drivers/staging/stlc45xx/Kconfig"
-
 source "drivers/staging/b3dfg/Kconfig"
 
 source "drivers/staging/phison/Kconfig"

drivers/staging/Makefile

@@ -29,7 +29,6 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_ANDROID)		+= dream/
 obj-$(CONFIG_DST)		+= dst/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/
-obj-$(CONFIG_STLC45XX)		+= stlc45xx/
 obj-$(CONFIG_B3DFG)		+= b3dfg/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_PLAN9AUTH)		+= p9auth/

drivers/staging/android/Kconfig

@@ -2,6 +2,7 @@ menu "Android"
 
 config ANDROID
 	bool "Android Drivers"
+	depends on BROKEN
 	default N
 	---help---
 	  Enable support for various drivers needed on the Android platform

drivers/staging/hv/ChannelMgmt.h

@@ -26,6 +26,7 @@
 #define _CHANNEL_MGMT_H_
 
 #include <linux/list.h>
+#include <linux/timer.h>
 #include "RingBuffer.h"
 #include "VmbusChannelInterface.h"
 #include "VmbusPacketFormat.h"
@@ -54,7 +55,7 @@ enum vmbus_channel_message_type {
 	ChannelMessageViewRangeRemove		= 18,
 #endif
 	ChannelMessageCount
-} __attribute__((packed));
+};
 
 struct vmbus_channel_message_header {
 	enum vmbus_channel_message_type MessageType;

drivers/staging/hv/NetVsc.c

@@ -1052,7 +1052,7 @@ static void NetVscOnReceive(struct hv_device *Device,
 	 */
 	spin_lock_irqsave(&netDevice->receive_packet_list_lock, flags);
 	while (!list_empty(&netDevice->ReceivePacketList)) {
-		list_move_tail(&netDevice->ReceivePacketList, &listHead);
+		list_move_tail(netDevice->ReceivePacketList.next, &listHead);
 		if (++count == vmxferpagePacket->RangeCount + 1)
 			break;
 	}
@@ -1071,7 +1071,7 @@ static void NetVscOnReceive(struct hv_device *Device,
 		/* Return it to the freelist */
 		spin_lock_irqsave(&netDevice->receive_packet_list_lock, flags);
 		for (i = count; i != 0; i--) {
-			list_move_tail(&listHead,
+			list_move_tail(listHead.next,
 				       &netDevice->ReceivePacketList);
 		}
 		spin_unlock_irqrestore(&netDevice->receive_packet_list_lock,
@@ -1085,8 +1085,7 @@ static void NetVscOnReceive(struct hv_device *Device,
 	}
 
 	/* Remove the 1st packet to represent the xfer page packet itself */
-	xferpagePacket = list_entry(&listHead, struct xferpage_packet,
-				    ListEntry);
+	xferpagePacket = (struct xferpage_packet*)listHead.next;
 	list_del(&xferpagePacket->ListEntry);
 
 	/* This is how much we can satisfy */
@@ -1102,8 +1101,7 @@ static void NetVscOnReceive(struct hv_device *Device,
 
 	/* Each range represents 1 RNDIS pkt that contains 1 ethernet frame */
 	for (i = 0; i < (count - 1); i++) {
-		netvscPacket = list_entry(&listHead, struct hv_netvsc_packet,
-					  ListEntry);
+		netvscPacket = (struct hv_netvsc_packet*)listHead.next;
 		list_del(&netvscPacket->ListEntry);
 
 		/* Initialize the netvsc packet */

drivers/staging/hv/TODO

 TODO:
 	- fix remaining checkpatch warnings and errors
+	- use of /** when it is not a kerneldoc header
 	- remove RingBuffer.c to us in-kernel ringbuffer functions instead.
 	- audit the vmbus to verify it is working properly with the
 	  driver model
+	- convert vmbus driver interface function pointer tables
+          to constant, a.k.a vmbus_ops
 	- see if the vmbus can be merged with the other virtual busses
 	  in the kernel
 	- audit the network driver
+	  - use existing net_device_stats struct in network device
+	  - checking for carrier inside open is wrong, network device API
+            confusion??
 	- audit the block driver
 	- audit the scsi driver
 

drivers/staging/hv/osd.h

@@ -25,6 +25,7 @@
 #ifndef _OSD_H_
 #define _OSD_H_
 
+#include <linux/workqueue.h>
 
 /* Defines */
 #define ALIGN_UP(value, align)	(((value) & (align-1)) ?		\

drivers/staging/hv/vmbus_drv.c

@@ -507,12 +507,12 @@ static struct hv_device *vmbus_child_device_create(struct hv_guid *type,
 
 	child_device_obj = &child_device_ctx->device_obj;
 	child_device_obj->context = context;
-	memcpy(&child_device_obj->deviceType, &type, sizeof(struct hv_guid));
-	memcpy(&child_device_obj->deviceInstance, &instance,
+	memcpy(&child_device_obj->deviceType, type, sizeof(struct hv_guid));
+	memcpy(&child_device_obj->deviceInstance, instance,
 	       sizeof(struct hv_guid));
 
-	memcpy(&child_device_ctx->class_id, &type, sizeof(struct hv_guid));
-	memcpy(&child_device_ctx->device_id, &instance, sizeof(struct hv_guid));
+	memcpy(&child_device_ctx->class_id, type, sizeof(struct hv_guid));
+	memcpy(&child_device_ctx->device_id, instance, sizeof(struct hv_guid));
 
 	DPRINT_EXIT(VMBUS_DRV);
 
@@ -537,18 +537,7 @@ static int vmbus_child_device_register(struct hv_device *root_device_obj,
 	DPRINT_DBG(VMBUS_DRV, "child device (%p) registering",
 		   child_device_ctx);
 
-	/* Make sure we are not registered already */
-	if (strlen(dev_name(&child_device_ctx->device)) != 0) {
-		DPRINT_ERR(VMBUS_DRV,
-			   "child device (%p) already registered - busid %s",
-			   child_device_ctx,
-			   dev_name(&child_device_ctx->device));
-
-		ret = -1;
-		goto Cleanup;
-	}
-
-	/* Set the device bus id. Otherwise, device_register()will fail. */
+	/* Set the device name. Otherwise, device_register() will fail. */
 	dev_set_name(&child_device_ctx->device, "vmbus_0_%d",
 		     atomic_inc_return(&device_num));
 
@@ -573,7 +562,6 @@ static int vmbus_child_device_register(struct hv_device *root_device_obj,
 		DPRINT_INFO(VMBUS_DRV, "child device (%p) registered",
 			    &child_device_ctx->device);
 
-Cleanup:
 	DPRINT_EXIT(VMBUS_DRV);
 
 	return ret;
@@ -623,8 +611,6 @@ static void vmbus_child_device_destroy(struct hv_device *device_obj)
 static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env)
 {
 	struct device_context *device_ctx = device_to_device_context(device);
-	int i = 0;
-	int len = 0;
 	int ret;
 
 	DPRINT_ENTER(VMBUS_DRV);
@@ -644,8 +630,6 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env)
 		    device_ctx->class_id.data[14],
 		    device_ctx->class_id.data[15]);
 
-	env->envp_idx = i;
-	env->buflen = len;
 	ret = add_uevent_var(env, "VMBUS_DEVICE_CLASS_GUID={"
 			     "%02x%02x%02x%02x-%02x%02x-%02x%02x-"
 			     "%02x%02x%02x%02x%02x%02x%02x%02x}",
@@ -691,8 +675,6 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env)
 	if (ret)
 		return ret;
 
-	env->envp[env->envp_idx] = NULL;
-
 	DPRINT_EXIT(VMBUS_DRV);
 
 	return 0;

drivers/staging/otus/Kconfig

 config OTUS
 	tristate "Atheros OTUS 802.11n USB wireless support"
-	depends on USB && WLAN_80211 && MAC80211
+	depends on USB && WLAN && MAC80211
 	default N
 	---help---
 	  Enable support for Atheros 802.11n USB hardware:

drivers/staging/panel/panel.c

@@ -2071,11 +2071,15 @@ static void panel_detach(struct parport *port)
 		return;
 	}
 
-	if (keypad_enabled && keypad_initialized)
+	if (keypad_enabled && keypad_initialized) {
 		misc_deregister(&keypad_dev);
+		keypad_initialized = 0;
+	}
 
-	if (lcd_enabled && lcd_initialized)
+	if (lcd_enabled && lcd_initialized) {
 		misc_deregister(&lcd_dev);
+		lcd_initialized = 0;
+	}
 
 	parport_release(pprt);
 	parport_unregister_device(pprt);
@@ -2211,13 +2215,16 @@ static void __exit panel_cleanup_module(void)
 		del_timer(&scan_timer);
 
 	if (pprt != NULL) {
-		if (keypad_enabled)
+		if (keypad_enabled) {
 			misc_deregister(&keypad_dev);
+			keypad_initialized = 0;
+		}
 
 		if (lcd_enabled) {
 			panel_lcd_print("\x0cLCD driver " PANEL_VERSION
 					"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
 			misc_deregister(&lcd_dev);
+			lcd_initialized = 0;
 		}
 
 		/* TODO: free all input signals */

drivers/staging/rt2860/Kconfig

 config RT2860
 	tristate "Ralink 2860 wireless support"
-	depends on PCI && X86 && WLAN_80211
+	depends on PCI && X86 && WLAN
 	---help---
 	  This is an experimental driver for the Ralink 2860 wireless chip.

drivers/staging/rt2870/Kconfig

 config RT2870
 	tristate "Ralink 2870/3070 wireless support"
-	depends on USB && X86 && WLAN_80211
+	depends on USB && X86 && WLAN
 	---help---
 	  This is an experimental driver for the Ralink xx70 wireless chips.

drivers/staging/rt3090/Kconfig

 config RT3090
 	tristate "Ralink 3090 wireless support"
-	depends on PCI && X86 && WLAN_80211
+	depends on PCI && X86 && WLAN
 	---help---
 	  This is an experimental driver for the Ralink 3090 wireless chip.

drivers/staging/rtl8187se/Kconfig

 config RTL8187SE
 	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
-	depends on PCI
+	depends on PCI && WLAN
 	depends on WIRELESS_EXT
 	default N
 	---help---

drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c

@@ -53,10 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee,
 
 		list_del(ptr);
 
-		if (entry->ops) {
+		if (entry->ops)
 			entry->ops->deinit(entry->priv);
-			module_put(entry->ops->owner);
-		}
 		kfree(entry);
 	}
 }

drivers/staging/rtl8187se/ieee80211/ieee80211_module.c

@@ -189,10 +189,8 @@ void free_ieee80211(struct net_device *dev)
 	for (i = 0; i < WEP_KEYS; i++) {
 		struct ieee80211_crypt_data *crypt = ieee->crypt[i];
 		if (crypt) {
-			if (crypt->ops) {
+			if (crypt->ops)
 				crypt->ops->deinit(crypt->priv);
-				module_put(crypt->ops->owner);
-			}
 			kfree(crypt);
 			ieee->crypt[i] = NULL;
 		}

drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c

@@ -2839,16 +2839,12 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
 		goto skip_host_crypt;
 
 	ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
-		request_module("ieee80211_crypt_wep");
+	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	} else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
-		request_module("ieee80211_crypt_tkip");
+	else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	} else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
-		request_module("ieee80211_crypt_ccmp");
+	else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	}
 	if (ops == NULL) {
 		printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
 		param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
@@ -2869,7 +2865,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
 		}
 		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
 		new_crypt->ops = ops;
-		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+		if (new_crypt->ops)
 			new_crypt->priv =
 				new_crypt->ops->init(param->u.crypt.idx);
 

drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c

@@ -331,12 +331,10 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
 			return -ENOMEM;
 		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
 		new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-		if (!new_crypt->ops) {
-			request_module("ieee80211_crypt_wep");
+		if (!new_crypt->ops)
 			new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-		}
 
-		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+		if (new_crypt->ops)
 			new_crypt->priv = new_crypt->ops->init(key);
 
 		if (!new_crypt->ops || !new_crypt->priv) {
@@ -483,7 +481,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
         int i, idx, ret = 0;
         int group_key = 0;
-        const char *alg, *module;
+        const char *alg;
         struct ieee80211_crypto_ops *ops;
         struct ieee80211_crypt_data **crypt;
 
@@ -539,15 +537,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         switch (ext->alg) {
         case IW_ENCODE_ALG_WEP:
                 alg = "WEP";
-                module = "ieee80211_crypt_wep";
                 break;
         case IW_ENCODE_ALG_TKIP:
                 alg = "TKIP";
-                module = "ieee80211_crypt_tkip";
                 break;
         case IW_ENCODE_ALG_CCMP:
                 alg = "CCMP";
-                module = "ieee80211_crypt_ccmp";
                 break;
         default:
                 IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
@@ -558,10 +553,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
 //	printk("8-09-08-9=====>%s, alg name:%s\n",__func__, alg);
 
 	 ops = ieee80211_get_crypto_ops(alg);
-        if (ops == NULL) {
-                request_module(module);
+        if (ops == NULL)
                 ops = ieee80211_get_crypto_ops(alg);
-        }
         if (ops == NULL) {
                 IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
                                    dev->name, ext->alg);
@@ -581,7 +574,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
                         goto done;
                 }
                 new_crypt->ops = ops;
-                if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+                if (new_crypt->ops)
                         new_crypt->priv = new_crypt->ops->init(idx);
                 if (new_crypt->priv == NULL) {
                         kfree(new_crypt);

drivers/staging/rtl8192e/Kconfig

 config RTL8192E
 	tristate "RealTek RTL8192E Wireless LAN NIC driver"
-	depends on PCI
+	depends on PCI && WLAN
 	depends on WIRELESS_EXT
 	default N
 	---help---

drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c

@@ -53,14 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee,
 
 		list_del(ptr);
 
-		if (entry->ops) {
+		if (entry->ops)
 			entry->ops->deinit(entry->priv);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-			module_put(entry->ops->owner);
-#else
-			__MOD_DEC_USE_COUNT(entry->ops->owner);
-#endif
-		}
 		kfree(entry);
 	}
 }

drivers/staging/rtl8192e/ieee80211/ieee80211_module.c

@@ -242,14 +242,8 @@ void free_ieee80211(struct net_device *dev)
 	for (i = 0; i < WEP_KEYS; i++) {
 		struct ieee80211_crypt_data *crypt = ieee->crypt[i];
 		if (crypt) {
-			if (crypt->ops) {
+			if (crypt->ops)
 				crypt->ops->deinit(crypt->priv);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-				module_put(crypt->ops->owner);
-#else
-				__MOD_DEC_USE_COUNT(crypt->ops->owner);
-#endif
-			}
 			kfree(crypt);
 			ieee->crypt[i] = NULL;
 		}

drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c

@@ -3284,17 +3284,14 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
 		goto skip_host_crypt;
 
 	ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
-		request_module("ieee80211_crypt_wep");
+	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-		//set WEP40 first, it will be modified according to WEP104 or WEP40 at other place
-	} else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
-		request_module("ieee80211_crypt_tkip");
+		/* set WEP40 first, it will be modified according to WEP104 or
+		 * WEP40 at other place */
+	else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	} else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
-		request_module("ieee80211_crypt_ccmp");
+	else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	}
 	if (ops == NULL) {
 		printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
 		param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
@@ -3315,11 +3312,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
 		}
 		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
 		new_crypt->ops = ops;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
-#else
-		if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner))
-#endif
+		if (new_crypt->ops)
 			new_crypt->priv =
 				new_crypt->ops->init(param->u.crypt.idx);
 

drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c

@@ -482,15 +482,9 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
 			return -ENOMEM;
 		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
 		new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-		if (!new_crypt->ops) {
-			request_module("ieee80211_crypt_wep");
+		if (!new_crypt->ops)
 			new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-		}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
-#else
-		if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner))
-#endif
+		if (new_crypt->ops)
 			new_crypt->priv = new_crypt->ops->init(key);
 
 		if (!new_crypt->ops || !new_crypt->priv) {
@@ -644,7 +638,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
         int i, idx;
         int group_key = 0;
-        const char *alg, *module;
+        const char *alg;
         struct ieee80211_crypto_ops *ops;
         struct ieee80211_crypt_data **crypt;
 
@@ -711,15 +705,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         switch (ext->alg) {
         case IW_ENCODE_ALG_WEP:
                 alg = "WEP";
-                module = "ieee80211_crypt_wep";
                 break;
         case IW_ENCODE_ALG_TKIP:
                 alg = "TKIP";
-                module = "ieee80211_crypt_tkip";
                 break;
         case IW_ENCODE_ALG_CCMP:
                 alg = "CCMP";
-                module = "ieee80211_crypt_ccmp";
                 break;
         default:
                 IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
@@ -730,10 +721,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
 	printk("alg name:%s\n",alg);
 
 	 ops = ieee80211_get_crypto_ops(alg);
-        if (ops == NULL) {
-                request_module(module);
+        if (ops == NULL)
                 ops = ieee80211_get_crypto_ops(alg);
-        }
         if (ops == NULL) {
                 IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
                                    dev->name, ext->alg);
@@ -758,7 +747,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
                         goto done;
                 }
                 new_crypt->ops = ops;
-                if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+                if (new_crypt->ops)
                         new_crypt->priv = new_crypt->ops->init(idx);
                 if (new_crypt->priv == NULL) {
                         kfree(new_crypt);

drivers/staging/rtl8192su/Kconfig

 config RTL8192SU
 	tristate "RealTek RTL8192SU Wireless LAN NIC driver"
-	depends on PCI
+	depends on PCI && WLAN
 	depends on WIRELESS_EXT
 	default N
 	---help---

drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c

@@ -53,10 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee,
 
 		list_del(ptr);
 
-		if (entry->ops) {
+		if (entry->ops)
 			entry->ops->deinit(entry->priv);
-			module_put(entry->ops->owner);
-		}
 		kfree(entry);
 	}
 }

drivers/staging/rtl8192su/ieee80211/ieee80211_module.c

@@ -216,10 +216,8 @@ void free_ieee80211(struct net_device *dev)
 	for (i = 0; i < WEP_KEYS; i++) {
 		struct ieee80211_crypt_data *crypt = ieee->crypt[i];
 		if (crypt) {
-			if (crypt->ops) {
+			if (crypt->ops)
 				crypt->ops->deinit(crypt->priv);
-				module_put(crypt->ops->owner);
-			}
 			kfree(crypt);
 			ieee->crypt[i] = NULL;
 		}

drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c

@@ -3026,17 +3026,14 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
 		goto skip_host_crypt;
 
 	ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
-		request_module("ieee80211_crypt_wep");
+	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-		//set WEP40 first, it will be modified according to WEP104 or WEP40 at other place
-	} else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
-		request_module("ieee80211_crypt_tkip");
+		/* set WEP40 first, it will be modified according to WEP104 or
+		 * WEP40 at other place */
+	else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	} else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
-		request_module("ieee80211_crypt_ccmp");
+	else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0)
 		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	}
 	if (ops == NULL) {
 		printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
 		param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
@@ -3058,7 +3055,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
 		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
 		new_crypt->ops = ops;
 
-		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+		if (new_crypt->ops)
 			new_crypt->priv =
 				new_crypt->ops->init(param->u.crypt.idx);
 

drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c

@@ -358,11 +358,9 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
 			return -ENOMEM;
 		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
 		new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-		if (!new_crypt->ops) {
-			request_module("ieee80211_crypt_wep");
+		if (!new_crypt->ops)
 			new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-		}
-		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+		if (new_crypt->ops)
 			new_crypt->priv = new_crypt->ops->init(key);
 
 		if (!new_crypt->ops || !new_crypt->priv) {
@@ -507,7 +505,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
         int i, idx;
         int group_key = 0;
-        const char *alg, *module;
+        const char *alg;
         struct ieee80211_crypto_ops *ops;
         struct ieee80211_crypt_data **crypt;
 
@@ -570,15 +568,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         switch (ext->alg) {
         case IW_ENCODE_ALG_WEP:
                 alg = "WEP";
-                module = "ieee80211_crypt_wep";
                 break;
         case IW_ENCODE_ALG_TKIP:
                 alg = "TKIP";
-                module = "ieee80211_crypt_tkip";
                 break;
         case IW_ENCODE_ALG_CCMP:
                 alg = "CCMP";
-                module = "ieee80211_crypt_ccmp";
                 break;
         default:
                 IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
@@ -589,10 +584,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
 	printk("alg name:%s\n",alg);
 
 	 ops = ieee80211_get_crypto_ops(alg);
-        if (ops == NULL) {
-                request_module("%s", module);
+        if (ops == NULL)
                 ops = ieee80211_get_crypto_ops(alg);
-        }
         if (ops == NULL) {
                 IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
                                    dev->name, ext->alg);
@@ -612,7 +605,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
                         goto done;
                 }
                 new_crypt->ops = ops;
-                if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+                if (new_crypt->ops)
                         new_crypt->priv = new_crypt->ops->init(idx);
                 if (new_crypt->priv == NULL) {
                         kfree(new_crypt);

drivers/staging/stlc45xx/Kconfig

-config STLC45XX
-	tristate "stlc4550/4560 support"
-	depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
-	---help---
-	  This is a driver for stlc4550 and stlc4560 chipsets.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called stlc45xx.  If unsure, say N.

drivers/staging/stlc45xx/Makefile

-obj-$(CONFIG_STLC45XX)	+= stlc45xx.o

drivers/staging/stlc45xx/stlc45xx.h

-/*
- * This file is part of stlc45xx
- *
- * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <net/mac80211.h>
-
-#include "stlc45xx_lmac.h"
-
-#define DRIVER_NAME "stlc45xx"
-#define DRIVER_VERSION "0.1.3"
-
-#define DRIVER_PREFIX DRIVER_NAME ": "
-
-enum {
-	DEBUG_NONE = 0,
-	DEBUG_FUNC = 1 << 0,
-	DEBUG_IRQ = 1 << 1,
-	DEBUG_BH = 1 << 2,
-	DEBUG_RX = 1 << 3,
-	DEBUG_RX_CONTENT = 1 << 5,
-	DEBUG_TX = 1 << 6,
-	DEBUG_TX_CONTENT = 1 << 8,
-	DEBUG_TXBUFFER = 1 << 9,
-	DEBUG_QUEUE = 1 << 10,
-	DEBUG_BOOT = 1 << 11,
-	DEBUG_PSM = 1 << 12,
-	DEBUG_ALL = ~0,
-};
-
-#define DEBUG_LEVEL DEBUG_NONE
-/* #define DEBUG_LEVEL DEBUG_ALL */
-/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_RX | DEBUG_IRQ) */
-/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_MEMREGION | DEBUG_QUEUE) */
-/* #define DEBUG_LEVEL (DEBUG_MEMREGION | DEBUG_QUEUE) */
-
-#define stlc45xx_error(fmt, arg...) \
-	printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
-
-#define stlc45xx_warning(fmt, arg...) \
-	printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
-
-#define stlc45xx_info(fmt, arg...) \
-	printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
-
-#define stlc45xx_debug(level, fmt, arg...) \
-	do { \
-		if (level & DEBUG_LEVEL) \
-			printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
-	} while (0)
-
-#define stlc45xx_dump(level, buf, len)		\
-	do { \
-		if (level & DEBUG_LEVEL) \
-			print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \
-				       16, 1, buf, len, 1);		\
-	} while (0)
-
-#define MAC2STR(a) ((a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5])
-#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
-
-/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */
-#define ADDR_READ_BIT_15  0x8000
-
-#define SPI_ADRS_ARM_INTERRUPTS     0x00
-#define SPI_ADRS_ARM_INT_EN	    0x04
-
-#define SPI_ADRS_HOST_INTERRUPTS    0x08
-#define SPI_ADRS_HOST_INT_EN	    0x0c
-#define SPI_ADRS_HOST_INT_ACK	    0x10
-
-#define SPI_ADRS_GEN_PURP_1   	    0x14
-#define SPI_ADRS_GEN_PURP_2   	    0x18
-
-/* high word */
-#define SPI_ADRS_DEV_CTRL_STAT      0x26
-
-#define SPI_ADRS_DMA_DATA      	    0x28
-
-#define SPI_ADRS_DMA_WRITE_CTRL     0x2c
-#define SPI_ADRS_DMA_WRITE_LEN      0x2e
-#define SPI_ADRS_DMA_WRITE_BASE     0x30
-
-#define SPI_ADRS_DMA_READ_CTRL      0x34
-#define SPI_ADRS_DMA_READ_LEN       0x36
-#define SPI_ADRS_DMA_READ_BASE      0x38
-
-#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000
-#define SPI_CTRL_STAT_START_HALTED  0x4000
-#define SPI_CTRL_STAT_RAM_BOOT      0x2000
-#define SPI_CTRL_STAT_HOST_RESET    0x1000
-#define SPI_CTRL_STAT_HOST_CPU_EN   0x0800
-
-#define SPI_DMA_WRITE_CTRL_ENABLE   0x0001
-#define SPI_DMA_READ_CTRL_ENABLE    0x0001
-#define HOST_ALLOWED                (1 << 7)
-
-#define FIRMWARE_ADDRESS                        0x20000
-
-#define SPI_TIMEOUT                             100         /* msec */
-
-#define SPI_MAX_TX_PACKETS                      32
-
-#define SPI_MAX_PACKET_SIZE                     32767
-
-#define SPI_TARGET_INT_WAKEUP                   0x00000001
-#define SPI_TARGET_INT_SLEEP                    0x00000002
-#define SPI_TARGET_INT_RDDONE                   0x00000004
-
-#define SPI_TARGET_INT_CTS                      0x00004000
-#define SPI_TARGET_INT_DR                       0x00008000
-
-#define SPI_HOST_INT_READY                      0x00000001
-#define SPI_HOST_INT_WR_READY                   0x00000002
-#define SPI_HOST_INT_SW_UPDATE                  0x00000004
-#define SPI_HOST_INT_UPDATE                     0x10000000
-
-/* clear to send */
-#define SPI_HOST_INT_CTS	                0x00004000
-
-/* data ready */
-#define SPI_HOST_INT_DR	                        0x00008000
-
-#define SPI_HOST_INTS_DEFAULT \
-	(SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)
-
-#define TARGET_BOOT_SLEEP 50
-
-/* The firmware buffer is divided into three areas:
- *
- * o config area (for control commands)
- * o tx buffer
- * o rx buffer
- */
-#define FIRMWARE_BUFFER_START 0x20200
-#define FIRMWARE_BUFFER_END 0x27c60
-#define FIRMWARE_BUFFER_LEN (FIRMWARE_BUFFER_END - FIRMWARE_BUFFER_START)
-#define FIRMWARE_MTU 3240
-#define FIRMWARE_CONFIG_PAYLOAD_LEN 1024
-#define FIRMWARE_CONFIG_START FIRMWARE_BUFFER_START
-#define FIRMWARE_CONFIG_LEN (sizeof(struct s_lm_control) + \
-			     FIRMWARE_CONFIG_PAYLOAD_LEN)
-#define FIRMWARE_CONFIG_END (FIRMWARE_CONFIG_START + FIRMWARE_CONFIG_LEN - 1)
-#define FIRMWARE_RXBUFFER_LEN (5 * FIRMWARE_MTU + 1024)
-#define FIRMWARE_RXBUFFER_START (FIRMWARE_BUFFER_END - FIRMWARE_RXBUFFER_LEN)
-#define FIRMWARE_RXBUFFER_END (FIRMWARE_RXBUFFER_START + \
-			       FIRMWARE_RXBUFFER_LEN - 1)
-#define FIRMWARE_TXBUFFER_START (FIRMWARE_BUFFER_START + FIRMWARE_CONFIG_LEN)
-#define FIRMWARE_TXBUFFER_LEN (FIRMWARE_BUFFER_LEN - FIRMWARE_CONFIG_LEN - \
-			       FIRMWARE_RXBUFFER_LEN)
-#define FIRMWARE_TXBUFFER_END (FIRMWARE_TXBUFFER_START + \
-			       FIRMWARE_TXBUFFER_LEN - 1)
-
-#define FIRMWARE_TXBUFFER_HEADER 100
-#define FIRMWARE_TXBUFFER_TRAILER 4
-
-/* FIXME: come up with a proper value */
-#define MAX_FRAME_LEN 2500
-
-/* unit is ms */
-#define TX_FRAME_LIFETIME 2000
-#define TX_TIMEOUT 4000
-
-#define SUPPORTED_CHANNELS 13
-
-/* FIXME */
-/* #define CHANNEL_CAL_LEN offsetof(struct s_lmo_scan, bratemask) - \ */
-/* 	offsetof(struct s_lmo_scan, channel) */
-#define CHANNEL_CAL_LEN 292
-#define CHANNEL_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * CHANNEL_CAL_LEN)
-/* FIXME */
-/* #define RSSI_CAL_LEN sizeof(struct s_lmo_scan) - \ */
-/* 	offsetof(struct s_lmo_scan, rssical) */
-#define RSSI_CAL_LEN 8
-#define RSSI_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * RSSI_CAL_LEN)
-
-struct s_dma_regs {
-	unsigned short cmd;
-	unsigned short len;
-	unsigned long addr;
-};
-
-struct stlc45xx_ie_tim {
-	u8 dtim_count;
-	u8 dtim_period;
-	u8 bmap_control;
-	u8 pvbmap[251];
-};
-
-struct txbuffer {
-	/* can be removed when switched to skb queue */
-	struct list_head tx_list;
-
-	struct list_head buffer_list;
-
-	int start;
-	int frame_start;
-	int end;
-
-	struct sk_buff *skb;
-	u32 handle;
-
-	bool status_needed;
-
-	int header_len;
-
-	/* unit jiffies */
-	unsigned long lifetime;
-};
-
-enum fw_state {
-	FW_STATE_OFF,
-	FW_STATE_BOOTING,
-	FW_STATE_READY,
-	FW_STATE_RESET,
-	FW_STATE_RESETTING,
-};
-
-struct stlc45xx {
-	struct ieee80211_hw *hw;
-	struct spi_device *spi;
-	struct work_struct work;
-	struct work_struct work_reset;
-	struct delayed_work work_tx_timeout;
-	struct mutex mutex;
-	struct completion fw_comp;
-
-
-	u8 bssid[ETH_ALEN];
-	u8 mac_addr[ETH_ALEN];
-	int channel;
-
-	u8 *cal_rssi;
-	u8 *cal_channels;
-
-	enum fw_state fw_state;
-
-	spinlock_t tx_lock;
-
-	/* protected by tx_lock */
-	struct list_head txbuffer;
-
-	/* protected by tx_lock */
-	struct list_head tx_pending;
-
-	/* protected by tx_lock */
-	int tx_queue_stopped;
-
-	/* protected by mutex */
-	struct list_head tx_sent;
-
-	int tx_frames;
-
-	u8 *fw;
-	int fw_len;
-
-	bool psm;
-	bool associated;
-	int aid;
-	bool pspolling;
-};
-
-

drivers/staging/vt6656/main_usb.c

@@ -1332,7 +1332,6 @@ device_release_WPADEV(pDevice);
         free_netdev(pDevice->dev);
     }
 
-	kfree(pDevice);
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_disconnect3.. \n");
 }
 

drivers/staging/winbond/Kconfig

 config W35UND
 	tristate "IS89C35 WLAN USB driver"
-	depends on MAC80211 && WLAN_80211 && USB && EXPERIMENTAL
+	depends on MAC80211 && WLAN && USB && EXPERIMENTAL
 	default n
 	---help---
 	  This is highly experimental driver for Winbond WIFI card.

drivers/staging/wlan-ng/Kconfig

 config PRISM2_USB
 	tristate "Prism2.5/3 USB driver"
-	depends on WLAN_80211 && USB && WIRELESS_EXT
+	depends on WLAN && USB && WIRELESS_EXT
 	default n
 	---help---
 	  This is the wlan-ng prism 2.5/3 USB driver for a wide range of