ath9k_hw: Enable calibration types in init_cal_settings

Doing this in ath9k_hw_fill_cap_info() is odd and it's
cleaner to do this in the init function for calibration.
Also, setup the supported calibration type in init_cal_settings.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_calib.c

@@ -323,6 +323,14 @@ static const struct ath9k_percal_data iq_cal_single_sample = {
 static void ar9003_hw_init_cal_settings(struct ath_hw *ah)
 {
 	ah->iq_caldata.calData = &iq_cal_single_sample;
+
+	if (AR_SREV_9300_20_OR_LATER(ah)) {
+		ah->enabled_cals |= TX_IQ_CAL;
+		if (AR_SREV_9485_OR_LATER(ah))
+			ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
+	}
+
+	ah->supp_cals = IQ_MISMATCH_CAL;
 }
 
 /*
@@ -1131,13 +1139,10 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 
 	/* Initialize list pointers */
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
-	ah->supp_cals = IQ_MISMATCH_CAL;
 
-	if (ah->supp_cals & IQ_MISMATCH_CAL) {
-		INIT_CAL(&ah->iq_caldata);
-		INSERT_CAL(ah, &ah->iq_caldata);
-		ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n");
-	}
+	INIT_CAL(&ah->iq_caldata);
+	INSERT_CAL(ah, &ah->iq_caldata);
+	ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n");
 
 	if (ah->supp_cals & TEMP_COMP_CAL) {
 		INIT_CAL(&ah->tempCompCalData);

drivers/net/wireless/ath/ath9k/hw.c

@@ -2568,12 +2568,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		rx_chainmask >>= 1;
 	}
 
-	if (AR_SREV_9300_20_OR_LATER(ah)) {
-		ah->enabled_cals |= TX_IQ_CAL;
-		if (AR_SREV_9485_OR_LATER(ah))
-			ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
-	}
-
 	if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
 		if (!(ah->ent_mode & AR_ENT_OTP_49GHZ_DISABLE))
 			pCap->hw_caps |= ATH9K_HW_CAP_MCI;
@@ -2582,7 +2576,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 			pCap->hw_caps |= ATH9K_HW_CAP_RTT;
 	}
 
-
 	if (AR_SREV_9280_20_OR_LATER(ah)) {
 		pCap->hw_caps |= ATH9K_HW_WOW_DEVICE_CAPABLE |
 				 ATH9K_HW_WOW_PATTERN_MATCH_EXACT;