Commit b6aef071 authored by Michael Krufky's avatar Michael Krufky Committed by Linus Torvalds

[PATCH] dvb/v4l: lgdt3302: isolate tuner

Remove the dvb_pll_desc from the frontend and replace with a
pll_set-callback to isolate the tuner programming from the frontend.
Signed-off-by: default avatarMac Michaels <wmichaels1@earthlink.net>
Signed-off-by: default avatarMichael Krufky <mkrufky@m1k.net>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 7fd0f3ac
...@@ -74,11 +74,14 @@ static int i2c_writebytes (struct lgdt3302_state* state, ...@@ -74,11 +74,14 @@ static int i2c_writebytes (struct lgdt3302_state* state,
u8 *buf, /* data bytes to send */ u8 *buf, /* data bytes to send */
int len /* number of bytes to send */ ) int len /* number of bytes to send */ )
{ {
if (addr == state->config->pll_address) { u8 tmp[] = { buf[0], buf[1] };
struct i2c_msg msg = struct i2c_msg msg =
{ .addr = addr, .flags = 0, .buf = buf, .len = len }; { .addr = addr, .flags = 0, .buf = tmp, .len = 2 };
int err; int err;
int i;
for (i=1; i<len; i++) {
tmp[1] = buf[i];
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err); printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
if (err < 0) if (err < 0)
...@@ -86,27 +89,11 @@ static int i2c_writebytes (struct lgdt3302_state* state, ...@@ -86,27 +89,11 @@ static int i2c_writebytes (struct lgdt3302_state* state,
else else
return -EREMOTEIO; return -EREMOTEIO;
} }
} else { tmp[0]++;
u8 tmp[] = { buf[0], buf[1] };
struct i2c_msg msg =
{ .addr = addr, .flags = 0, .buf = tmp, .len = 2 };
int err;
int i;
for (i=1; i<len; i++) {
tmp[1] = buf[i];
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
tmp[0]++;
}
} }
return 0; return 0;
} }
static int i2c_readbytes (struct lgdt3302_state* state, static int i2c_readbytes (struct lgdt3302_state* state,
u8 addr, /* demod_address or pll_address */ u8 addr, /* demod_address or pll_address */
u8 *buf, /* holds data bytes read */ u8 *buf, /* holds data bytes read */
...@@ -207,7 +194,6 @@ static int lgdt3302_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) ...@@ -207,7 +194,6 @@ static int lgdt3302_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
static int lgdt3302_set_parameters(struct dvb_frontend* fe, static int lgdt3302_set_parameters(struct dvb_frontend* fe,
struct dvb_frontend_parameters *param) struct dvb_frontend_parameters *param)
{ {
u8 buf[4];
struct lgdt3302_state* state = struct lgdt3302_state* state =
(struct lgdt3302_state*) fe->demodulator_priv; (struct lgdt3302_state*) fe->demodulator_priv;
...@@ -290,16 +276,30 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe, ...@@ -290,16 +276,30 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
/* Change only if we are actually changing the channel */ /* Change only if we are actually changing the channel */
if (state->current_frequency != param->frequency) { if (state->current_frequency != param->frequency) {
dvb_pll_configure(state->config->pll_desc, buf, u8 buf[5];
param->frequency, 0);
dprintk("%s: tuner bytes: 0x%02x 0x%02x "
"0x%02x 0x%02x\n", __FUNCTION__, buf[0],buf[1],buf[2],buf[3]);
i2c_writebytes(state, state->config->pll_address ,buf, 4);
/* Check the status of the tuner pll */ /* This must be done before the initialized msg is declared */
i2c_readbytes(state, state->config->pll_address, buf, 1); state->config->pll_set(fe, param, buf);
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
struct i2c_msg msg =
{ .addr = buf[0], .flags = 0, .buf = &buf[1], .len = 4 };
int err;
dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x "
"0x%02x 0x%02x\n", __FUNCTION__,
buf[0],buf[1],buf[2],buf[3],buf[4]);
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, buf[0], buf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
#if 0
/* Check the status of the tuner pll */
i2c_readbytes(state, buf[0], &buf[1], 1);
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[1]);
#endif
/* Update current frequency */ /* Update current frequency */
state->current_frequency = param->frequency; state->current_frequency = param->frequency;
} }
...@@ -322,12 +322,6 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) ...@@ -322,12 +322,6 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
*status = 0; /* Reset status result */ *status = 0; /* Reset status result */
/* Check the status of the tuner pll */
i2c_readbytes(state, state->config->pll_address, buf, 1);
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
if ((buf[0] & 0xc0) != 0x40)
return 0; /* Tuner PLL not locked or not powered on */
/* /*
* You must set the Mask bits to 1 in the IRQ_MASK in order * You must set the Mask bits to 1 in the IRQ_MASK in order
* to see that status bit in the IRQ_STATUS register. * to see that status bit in the IRQ_STATUS register.
......
/* /*
* $Id: lgdt3302.h,v 1.2 2005/06/28 23:50:48 mkrufky Exp $
*
* Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM * Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM
* *
* Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
...@@ -30,8 +28,9 @@ struct lgdt3302_config ...@@ -30,8 +28,9 @@ struct lgdt3302_config
{ {
/* The demodulator's i2c address */ /* The demodulator's i2c address */
u8 demod_address; u8 demod_address;
u8 pll_address;
struct dvb_pll_desc *pll_desc; /* PLL interface */
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pll_address);
/* Need to set device param for start_dma */ /* Need to set device param for start_dma */
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
......
/* /*
* $Id: cx88-dvb.c,v 1.42 2005/07/12 15:44:55 mkrufky Exp $ * $Id: cx88-dvb.c,v 1.47 2005/07/20 05:20:37 mkrufky Exp $
* *
* device driver for Conexant 2388x based TV cards * device driver for Conexant 2388x based TV cards
* MPEG Transport Stream (DVB) routines * MPEG Transport Stream (DVB) routines
...@@ -211,6 +211,18 @@ static struct or51132_config pchdtv_hd3000 = { ...@@ -211,6 +211,18 @@ static struct or51132_config pchdtv_hd3000 = {
#endif #endif
#if CONFIG_DVB_LGDT3302 #if CONFIG_DVB_LGDT3302
static int lgdt3302_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
struct cx8802_dev *dev= fe->dvb->priv;
pllbuf[0] = dev->core->pll_addr;
dvb_pll_configure(dev->core->pll_desc, &pllbuf[1],
params->frequency, 0);
return 0;
}
static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured) static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{ {
struct cx8802_dev *dev= fe->dvb->priv; struct cx8802_dev *dev= fe->dvb->priv;
...@@ -221,17 +233,9 @@ static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured) ...@@ -221,17 +233,9 @@ static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
return 0; return 0;
} }
static struct lgdt3302_config fusionhdtv_3_gold_q = { static struct lgdt3302_config fusionhdtv_3_gold = {
.demod_address = 0x0e,
.pll_address = 0x61,
.pll_desc = &dvb_pll_microtune_4042,
.set_ts_params = lgdt3302_set_ts_param,
};
static struct lgdt3302_config fusionhdtv_3_gold_t = {
.demod_address = 0x0e, .demod_address = 0x0e,
.pll_address = 0x61, .pll_set = lgdt3302_pll_set,
.pll_desc = &dvb_pll_thomson_dtt7611,
.set_ts_params = lgdt3302_set_ts_param, .set_ts_params = lgdt3302_set_ts_param,
}; };
#endif #endif
...@@ -294,7 +298,9 @@ static int dvb_register(struct cx8802_dev *dev) ...@@ -294,7 +298,9 @@ static int dvb_register(struct cx8802_dev *dev)
mdelay(100); mdelay(100);
cx_set(MO_GP0_IO, 9); // ANT connector too FIXME cx_set(MO_GP0_IO, 9); // ANT connector too FIXME
mdelay(200); mdelay(200);
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold_q, dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_microtune_4042;
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold,
&dev->core->i2c_adap); &dev->core->i2c_adap);
} }
break; break;
...@@ -308,7 +314,9 @@ static int dvb_register(struct cx8802_dev *dev) ...@@ -308,7 +314,9 @@ static int dvb_register(struct cx8802_dev *dev)
mdelay(100); mdelay(100);
cx_set(MO_GP0_IO, 9); /* ANT connector too FIXME */ cx_set(MO_GP0_IO, 9); /* ANT connector too FIXME */
mdelay(200); mdelay(200);
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold_t, dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_thomson_dtt7611;
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold,
&dev->core->i2c_adap); &dev->core->i2c_adap);
} }
break; break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment