Commit b6f556cb authored by Niklas Söderlund's avatar Niklas Söderlund Committed by Mauro Carvalho Chehab

[media] media: rcar-vin: add support for V4L2_FIELD_ALTERNATE

The HW can capture both ODD and EVEN fields in separate buffers so it's
possible to support V4L2_FIELD_ALTERNATE. This patch add support for
this mode.

At probe time and when S_STD is called the driver will default to use
V4L2_FIELD_INTERLACED if the subdevice reports V4L2_FIELD_ALTERNATE. The
driver will only change the field type if the subdevice implements
G_STD, if not it will keep the default at V4L2_FIELD_ALTERNATE.

The user can always explicitly ask for V4L2_FIELD_ALTERNATE in S_FMT and
the driver will use that field format.
Signed-off-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent c6b3d8fc
......@@ -95,6 +95,7 @@
/* Video n Module Status Register bits */
#define VNMS_FBS_MASK (3 << 3)
#define VNMS_FBS_SHIFT 3
#define VNMS_FS (1 << 2)
#define VNMS_AV (1 << 1)
#define VNMS_CA (1 << 0)
......@@ -156,6 +157,7 @@ static int rvin_setup(struct rvin_dev *vin)
case V4L2_FIELD_INTERLACED_BT:
vnmc = VNMC_IM_FULL | VNMC_FOC;
break;
case V4L2_FIELD_ALTERNATE:
case V4L2_FIELD_NONE:
if (vin->continuous) {
vnmc = VNMC_IM_ODD_EVEN;
......@@ -329,15 +331,26 @@ static bool rvin_capture_active(struct rvin_dev *vin)
return rvin_read(vin, VNMS_REG) & VNMS_CA;
}
static int rvin_get_active_slot(struct rvin_dev *vin)
static int rvin_get_active_slot(struct rvin_dev *vin, u32 vnms)
{
if (vin->continuous)
return (rvin_read(vin, VNMS_REG) & VNMS_FBS_MASK)
>> VNMS_FBS_SHIFT;
return (vnms & VNMS_FBS_MASK) >> VNMS_FBS_SHIFT;
return 0;
}
static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
{
if (vin->format.field == V4L2_FIELD_ALTERNATE) {
/* If FS is set it's a Even field */
if (vnms & VNMS_FS)
return V4L2_FIELD_BOTTOM;
return V4L2_FIELD_TOP;
}
return vin->format.field;
}
static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
{
const struct rvin_video_format *fmt;
......@@ -878,7 +891,7 @@ static bool rvin_fill_hw(struct rvin_dev *vin)
static irqreturn_t rvin_irq(int irq, void *data)
{
struct rvin_dev *vin = data;
u32 int_status;
u32 int_status, vnms;
int slot;
unsigned int sequence, handled = 0;
unsigned long flags;
......@@ -905,7 +918,8 @@ static irqreturn_t rvin_irq(int irq, void *data)
}
/* Prepare for capture and update state */
slot = rvin_get_active_slot(vin);
vnms = rvin_read(vin, VNMS_REG);
slot = rvin_get_active_slot(vin, vnms);
sequence = vin->sequence++;
vin_dbg(vin, "IRQ %02d: %d\tbuf0: %c buf1: %c buf2: %c\tmore: %d\n",
......@@ -920,7 +934,7 @@ static irqreturn_t rvin_irq(int irq, void *data)
goto done;
/* Capture frame */
vin->queue_buf[slot]->field = vin->format.field;
vin->queue_buf[slot]->field = rvin_get_active_field(vin, vnms);
vin->queue_buf[slot]->sequence = sequence;
vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf, VB2_BUF_STATE_DONE);
......
......@@ -122,9 +122,21 @@ static int rvin_reset_format(struct rvin_dev *vin)
vin->format.colorspace = mf->colorspace;
vin->format.field = mf->field;
/*
* If the subdevice uses ALTERNATE field mode and G_STD is
* implemented use the VIN HW to combine the two fields to
* one INTERLACED frame. The ALTERNATE field mode can still
* be requested in S_FMT and be respected, this is just the
* default which is applied at probing or when S_STD is called.
*/
if (vin->format.field == V4L2_FIELD_ALTERNATE &&
v4l2_subdev_has_op(vin_to_source(vin), video, g_std))
vin->format.field = V4L2_FIELD_INTERLACED;
switch (vin->format.field) {
case V4L2_FIELD_TOP:
case V4L2_FIELD_BOTTOM:
case V4L2_FIELD_ALTERNATE:
vin->format.height /= 2;
break;
case V4L2_FIELD_NONE:
......@@ -225,6 +237,7 @@ static int __rvin_try_format(struct rvin_dev *vin,
switch (pix->field) {
case V4L2_FIELD_TOP:
case V4L2_FIELD_BOTTOM:
case V4L2_FIELD_ALTERNATE:
pix->height /= 2;
source->height /= 2;
break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment