Skip to content

L
linux
Commit b6f5be28 authored by Philippe Reynes's avatar Philippe Reynes Committed by David S. Miller
Browse files
Options

net: tg3: use new api ethtool_{get|set}_link_ksettings 

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: default avatarPhilippe Reynes <tremyfr@gmail.com>
Acked-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent be92e538
Hide whitespace changes
Inline Side-by-side
Showing with 62 additions and 50 deletions
drivers/net/ethernet/broadcom/tg3.c
View file @ b6f5be28
......@@ -12079,95 +12079,107 @@ static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
return ret;
}
static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static int tg3_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
struct tg3 *tp = netdev_priv(dev);
u32 supported, advertising;
if (tg3_flag(tp, USE_PHYLIB)) {
struct phy_device *phydev;
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
phydev = mdiobus_get_phy(tp->mdio_bus, tp->phy_addr);
return phy_ethtool_gset(phydev, cmd);
return phy_ethtool_ksettings_get(phydev, cmd);
}
cmd->supported = (SUPPORTED_Autoneg);
supported = (SUPPORTED_Autoneg);
if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
cmd->supported |= (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
supported |= (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES)) {
cmd->supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_TP);
cmd->port = PORT_TP;
supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_TP);
cmd->base.port = PORT_TP;
} else {
cmd->supported |= SUPPORTED_FIBRE;
cmd->port = PORT_FIBRE;
supported |= SUPPORTED_FIBRE;
cmd->base.port = PORT_FIBRE;
}
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
supported);
cmd->advertising = tp->link_config.advertising;
advertising = tp->link_config.advertising;
if (tg3_flag(tp, PAUSE_AUTONEG)) {
if (tp->link_config.flowctrl & FLOW_CTRL_RX) {
if (tp->link_config.flowctrl & FLOW_CTRL_TX) {
cmd->advertising |= ADVERTISED_Pause;
advertising |= ADVERTISED_Pause;
} else {
cmd->advertising |= ADVERTISED_Pause |
ADVERTISED_Asym_Pause;
advertising |= ADVERTISED_Pause |
ADVERTISED_Asym_Pause;
}
} else if (tp->link_config.flowctrl & FLOW_CTRL_TX) {
cmd->advertising |= ADVERTISED_Asym_Pause;
advertising |= ADVERTISED_Asym_Pause;
}
}
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
advertising);
if (netif_running(dev) && tp->link_up) {
ethtool_cmd_speed_set(cmd, tp->link_config.active_speed);
cmd->duplex = tp->link_config.active_duplex;
cmd->lp_advertising = tp->link_config.rmt_adv;
cmd->base.speed = tp->link_config.active_speed;
cmd->base.duplex = tp->link_config.active_duplex;
ethtool_convert_legacy_u32_to_link_mode(
cmd->link_modes.lp_advertising,
tp->link_config.rmt_adv);
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES)) {
if (tp->phy_flags & TG3_PHYFLG_MDIX_STATE)
cmd->eth_tp_mdix = ETH_TP_MDI_X;
cmd->base.eth_tp_mdix = ETH_TP_MDI_X;
else
cmd->eth_tp_mdix = ETH_TP_MDI;
cmd->base.eth_tp_mdix = ETH_TP_MDI;
}
} else {
ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
cmd->duplex = DUPLEX_UNKNOWN;
cmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
}
cmd->phy_address = tp->phy_addr;
cmd->transceiver = XCVR_INTERNAL;
cmd->autoneg = tp->link_config.autoneg;
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
cmd->base.speed = SPEED_UNKNOWN;
cmd->base.duplex = DUPLEX_UNKNOWN;
cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID;
}
cmd->base.phy_address = tp->phy_addr;
cmd->base.autoneg = tp->link_config.autoneg;
return 0;
}
static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static int tg3_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
struct tg3 *tp = netdev_priv(dev);
u32 speed = ethtool_cmd_speed(cmd);
u32 speed = cmd->base.speed;
u32 advertising;
if (tg3_flag(tp, USE_PHYLIB)) {
struct phy_device *phydev;
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
phydev = mdiobus_get_phy(tp->mdio_bus, tp->phy_addr);
return phy_ethtool_sset(phydev, cmd);
return phy_ethtool_ksettings_set(phydev, cmd);
}
if (cmd->autoneg != AUTONEG_ENABLE &&
cmd->autoneg != AUTONEG_DISABLE)
if (cmd->base.autoneg != AUTONEG_ENABLE &&
cmd->base.autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE &&
cmd->duplex != DUPLEX_FULL &&
cmd->duplex != DUPLEX_HALF)
if (cmd->base.autoneg == AUTONEG_DISABLE &&
cmd->base.duplex != DUPLEX_FULL &&
cmd->base.duplex != DUPLEX_HALF)
return -EINVAL;
if (cmd->autoneg == AUTONEG_ENABLE) {
ethtool_convert_link_mode_to_legacy_u32(&advertising,
cmd->link_modes.advertising);
if (cmd->base.autoneg == AUTONEG_ENABLE) {
u32 mask = ADVERTISED_Autoneg |
ADVERTISED_Pause |
ADVERTISED_Asym_Pause;
......@@ -12185,7 +12197,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
else
mask |= ADVERTISED_FIBRE;
if (cmd->advertising & ~mask)
if (advertising & ~mask)
return -EINVAL;
mask &= (ADVERTISED_1000baseT_Half |
......@@ -12195,13 +12207,13 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full);
cmd->advertising &= mask;
advertising &= mask;
} else {
if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES) {
if (speed != SPEED_1000)
return -EINVAL;
if (cmd->duplex != DUPLEX_FULL)
if (cmd->base.duplex != DUPLEX_FULL)
return -EINVAL;
} else {
if (speed != SPEED_100 &&
......@@ -12212,16 +12224,16 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
tg3_full_lock(tp, 0);
tp->link_config.autoneg = cmd->autoneg;
if (cmd->autoneg == AUTONEG_ENABLE) {
tp->link_config.advertising = (cmd->advertising |
tp->link_config.autoneg = cmd->base.autoneg;
if (cmd->base.autoneg == AUTONEG_ENABLE) {
tp->link_config.advertising = (advertising |
ADVERTISED_Autoneg);
tp->link_config.speed = SPEED_UNKNOWN;
tp->link_config.duplex = DUPLEX_UNKNOWN;
} else {
tp->link_config.advertising = 0;
tp->link_config.speed = speed;
tp->link_config.duplex = cmd->duplex;
tp->link_config.duplex = cmd->base.duplex;
}
tp->phy_flags |= TG3_PHYFLG_USER_CONFIGURED;
......@@ -14094,8 +14106,6 @@ static int tg3_get_eee(struct net_device *dev, struct ethtool_eee *edata)
}
static const struct ethtool_ops tg3_ethtool_ops = {
.get_settings = tg3_get_settings,
.set_settings = tg3_set_settings,
.get_drvinfo = tg3_get_drvinfo,
.get_regs_len = tg3_get_regs_len,
.get_regs = tg3_get_regs,
......@@ -14128,6 +14138,8 @@ static const struct ethtool_ops tg3_ethtool_ops = {
.get_ts_info = tg3_get_ts_info,
.get_eee = tg3_get_eee,
.set_eee = tg3_set_eee,
.get_link_ksettings = tg3_get_link_ksettings,
.set_link_ksettings = tg3_set_link_ksettings,
};
static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7