Commit b73d70ad authored by Harvey Harrison's avatar Harvey Harrison Committed by John W. Linville

mac80211: rx.c/tx.c remove more users of tx/rx_data->fc

Those functions that still use ieee80211_get_hdrlen are moved over
to use the little endian frame control.
Signed-off-by: default avatarHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent d2984872
......@@ -821,7 +821,7 @@ ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata,
static inline struct ieee80211_fragment_entry *
ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata,
u16 fc, unsigned int frag, unsigned int seq,
unsigned int frag, unsigned int seq,
int rx_queue, struct ieee80211_hdr *hdr)
{
struct ieee80211_fragment_entry *entry;
......@@ -830,7 +830,6 @@ ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata,
idx = sdata->fragment_next;
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) {
struct ieee80211_hdr *f_hdr;
u16 f_fc;
idx--;
if (idx < 0)
......@@ -842,10 +841,13 @@ ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata,
entry->last_frag + 1 != frag)
continue;
f_hdr = (struct ieee80211_hdr *) entry->skb_list.next->data;
f_fc = le16_to_cpu(f_hdr->frame_control);
f_hdr = (struct ieee80211_hdr *)entry->skb_list.next->data;
if ((fc & IEEE80211_FCTL_FTYPE) != (f_fc & IEEE80211_FCTL_FTYPE) ||
/*
* Check ftype and addresses are equal, else check next fragment
*/
if (((hdr->frame_control ^ f_hdr->frame_control) &
cpu_to_le16(IEEE80211_FCTL_FTYPE)) ||
compare_ether_addr(hdr->addr1, f_hdr->addr1) != 0 ||
compare_ether_addr(hdr->addr2, f_hdr->addr2) != 0)
continue;
......@@ -870,11 +872,11 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
struct sk_buff *skb;
DECLARE_MAC_BUF(mac);
hdr = (struct ieee80211_hdr *) rx->skb->data;
hdr = (struct ieee80211_hdr *)rx->skb->data;
sc = le16_to_cpu(hdr->seq_ctrl);
frag = sc & IEEE80211_SCTL_FRAG;
if (likely((!(rx->fc & IEEE80211_FCTL_MOREFRAGS) && frag == 0) ||
if (likely((!ieee80211_has_morefrags(hdr->frame_control) && frag == 0) ||
(rx->skb)->len < 24 ||
is_multicast_ether_addr(hdr->addr1))) {
/* not fragmented */
......@@ -889,7 +891,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
rx->queue, &(rx->skb));
if (rx->key && rx->key->conf.alg == ALG_CCMP &&
(rx->fc & IEEE80211_FCTL_PROTECTED)) {
ieee80211_has_protected(hdr->frame_control)) {
/* Store CCMP PN so that we can verify that the next
* fragment has a sequential PN value. */
entry->ccmp = 1;
......@@ -903,8 +905,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
/* This is a fragment for a frame that should already be pending in
* fragment cache. Add this fragment to the end of the pending entry.
*/
entry = ieee80211_reassemble_find(rx->sdata, rx->fc, frag, seq,
rx->queue, hdr);
entry = ieee80211_reassemble_find(rx->sdata, frag, seq, rx->queue, hdr);
if (!entry) {
I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag);
return RX_DROP_MONITOR;
......@@ -929,7 +930,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
memcpy(entry->last_pn, pn, CCMP_PN_LEN);
}
skb_pull(rx->skb, ieee80211_get_hdrlen(rx->fc));
skb_pull(rx->skb, ieee80211_hdrlen(hdr->frame_control));
__skb_queue_tail(&entry->skb_list, rx->skb);
entry->last_frag = frag;
entry->extra_len += rx->skb->len;
......@@ -1096,7 +1097,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
{
struct net_device *dev = rx->dev;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data;
u16 fc, hdrlen, ethertype;
u16 hdrlen, ethertype;
u8 *payload;
u8 dst[ETH_ALEN];
u8 src[ETH_ALEN] __aligned(2);
......@@ -1107,12 +1108,10 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
DECLARE_MAC_BUF(mac3);
DECLARE_MAC_BUF(mac4);
fc = rx->fc;
if (unlikely(!WLAN_FC_DATA_PRESENT(fc)))
if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
return -1;
hdrlen = ieee80211_get_hdrlen(fc);
hdrlen = ieee80211_hdrlen(hdr->frame_control);
if (ieee80211_vif_is_mesh(&sdata->vif))
hdrlen += ieee80211_get_mesh_hdrlen(
......@@ -1127,41 +1126,28 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
* 1 0 BSSID SA DA n/a
* 1 1 RA TA DA SA
*/
memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
switch (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
case IEEE80211_FCTL_TODS:
/* BSSID SA DA */
memcpy(dst, hdr->addr3, ETH_ALEN);
memcpy(src, hdr->addr2, ETH_ALEN);
switch (hdr->frame_control &
cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
case __constant_cpu_to_le16(IEEE80211_FCTL_TODS):
if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_AP &&
sdata->vif.type != IEEE80211_IF_TYPE_VLAN))
return -1;
break;
case (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
/* RA TA DA SA */
memcpy(dst, hdr->addr3, ETH_ALEN);
memcpy(src, hdr->addr4, ETH_ALEN);
if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS &&
case __constant_cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
if (unlikely(sdata->vif.type != IEEE80211_IF_TYPE_WDS &&
sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT))
return -1;
break;
case IEEE80211_FCTL_FROMDS:
/* DA BSSID SA */
memcpy(dst, hdr->addr1, ETH_ALEN);
memcpy(src, hdr->addr3, ETH_ALEN);
case __constant_cpu_to_le16(IEEE80211_FCTL_FROMDS):
if (sdata->vif.type != IEEE80211_IF_TYPE_STA ||
(is_multicast_ether_addr(dst) &&
!compare_ether_addr(src, dev->dev_addr)))
return -1;
break;
case 0:
/* DA SA BSSID */
memcpy(dst, hdr->addr1, ETH_ALEN);
memcpy(src, hdr->addr2, ETH_ALEN);
case __constant_cpu_to_le16(0):
if (sdata->vif.type != IEEE80211_IF_TYPE_IBSS)
return -1;
break;
......
......@@ -1025,7 +1025,7 @@ __ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
else if (test_and_clear_sta_flags(tx->sta, WLAN_STA_CLEAR_PS_FILT))
info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
hdrlen = ieee80211_get_hdrlen(tx->fc);
hdrlen = ieee80211_hdrlen(hdr->frame_control);
if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) {
u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)];
tx->ethertype = (pos[0] << 8) | pos[1];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment