Commit b7b617c5 authored by Olof Johansson's avatar Olof Johansson

Merge branch 'u300-fixes-for-arm-soc' of...

Merge branch 'u300-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes

* 'u300-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: u300: bump all IRQ numbers by one
  ARM: ux300: Fix unimplementable regulation constraints
parents 8ec7c840 1344500e
......@@ -1667,8 +1667,10 @@ void __init u300_init_irq(void)
for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
mask[1], mask[1]);
}
......
......@@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask =
REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.always_on = 1,
.boot_on = 1,
},
......@@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
.min_uV = 2500000,
.max_uV = 2500000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask =
REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.always_on = 1,
.boot_on = 1,
},
......@@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = {
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask =
REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.boot_on = 1,
},
......
......@@ -12,101 +12,101 @@
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define IRQ_U300_INTCON0_START 0
#define IRQ_U300_INTCON1_START 32
#define IRQ_U300_INTCON0_START 1
#define IRQ_U300_INTCON1_START 33
/* These are on INTCON0 - 30 lines */
#define IRQ_U300_IRQ0_EXT 0
#define IRQ_U300_IRQ1_EXT 1
#define IRQ_U300_DMA 2
#define IRQ_U300_VIDEO_ENC_0 3
#define IRQ_U300_VIDEO_ENC_1 4
#define IRQ_U300_AAIF_RX 5
#define IRQ_U300_AAIF_TX 6
#define IRQ_U300_AAIF_VGPIO 7
#define IRQ_U300_AAIF_WAKEUP 8
#define IRQ_U300_PCM_I2S0_FRAME 9
#define IRQ_U300_PCM_I2S0_FIFO 10
#define IRQ_U300_PCM_I2S1_FRAME 11
#define IRQ_U300_PCM_I2S1_FIFO 12
#define IRQ_U300_XGAM_GAMCON 13
#define IRQ_U300_XGAM_CDI 14
#define IRQ_U300_XGAM_CDICON 15
#define IRQ_U300_IRQ0_EXT 1
#define IRQ_U300_IRQ1_EXT 2
#define IRQ_U300_DMA 3
#define IRQ_U300_VIDEO_ENC_0 4
#define IRQ_U300_VIDEO_ENC_1 5
#define IRQ_U300_AAIF_RX 6
#define IRQ_U300_AAIF_TX 7
#define IRQ_U300_AAIF_VGPIO 8
#define IRQ_U300_AAIF_WAKEUP 9
#define IRQ_U300_PCM_I2S0_FRAME 10
#define IRQ_U300_PCM_I2S0_FIFO 11
#define IRQ_U300_PCM_I2S1_FRAME 12
#define IRQ_U300_PCM_I2S1_FIFO 13
#define IRQ_U300_XGAM_GAMCON 14
#define IRQ_U300_XGAM_CDI 15
#define IRQ_U300_XGAM_CDICON 16
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
/* MMIACC not used on the DB3210 or DB3350 chips */
#define IRQ_U300_XGAM_MMIACC 16
#define IRQ_U300_XGAM_MMIACC 17
#endif
#define IRQ_U300_XGAM_PDI 17
#define IRQ_U300_XGAM_PDICON 18
#define IRQ_U300_XGAM_GAMEACC 19
#define IRQ_U300_XGAM_MCIDCT 20
#define IRQ_U300_APEX 21
#define IRQ_U300_UART0 22
#define IRQ_U300_SPI 23
#define IRQ_U300_TIMER_APP_OS 24
#define IRQ_U300_TIMER_APP_DD 25
#define IRQ_U300_TIMER_APP_GP1 26
#define IRQ_U300_TIMER_APP_GP2 27
#define IRQ_U300_TIMER_OS 28
#define IRQ_U300_TIMER_MS 29
#define IRQ_U300_KEYPAD_KEYBF 30
#define IRQ_U300_KEYPAD_KEYBR 31
#define IRQ_U300_XGAM_PDI 18
#define IRQ_U300_XGAM_PDICON 19
#define IRQ_U300_XGAM_GAMEACC 20
#define IRQ_U300_XGAM_MCIDCT 21
#define IRQ_U300_APEX 22
#define IRQ_U300_UART0 23
#define IRQ_U300_SPI 24
#define IRQ_U300_TIMER_APP_OS 25
#define IRQ_U300_TIMER_APP_DD 26
#define IRQ_U300_TIMER_APP_GP1 27
#define IRQ_U300_TIMER_APP_GP2 28
#define IRQ_U300_TIMER_OS 29
#define IRQ_U300_TIMER_MS 30
#define IRQ_U300_KEYPAD_KEYBF 31
#define IRQ_U300_KEYPAD_KEYBR 32
/* These are on INTCON1 - 32 lines */
#define IRQ_U300_GPIO_PORT0 32
#define IRQ_U300_GPIO_PORT1 33
#define IRQ_U300_GPIO_PORT2 34
#define IRQ_U300_GPIO_PORT0 33
#define IRQ_U300_GPIO_PORT1 34
#define IRQ_U300_GPIO_PORT2 35
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
defined(CONFIG_MACH_U300_BS335)
/* These are for DB3150, DB3200 and DB3350 */
#define IRQ_U300_WDOG 35
#define IRQ_U300_EVHIST 36
#define IRQ_U300_MSPRO 37
#define IRQ_U300_MMCSD_MCIINTR0 38
#define IRQ_U300_MMCSD_MCIINTR1 39
#define IRQ_U300_I2C0 40
#define IRQ_U300_I2C1 41
#define IRQ_U300_RTC 42
#define IRQ_U300_NFIF 43
#define IRQ_U300_NFIF2 44
#define IRQ_U300_WDOG 36
#define IRQ_U300_EVHIST 37
#define IRQ_U300_MSPRO 38
#define IRQ_U300_MMCSD_MCIINTR0 39
#define IRQ_U300_MMCSD_MCIINTR1 40
#define IRQ_U300_I2C0 41
#define IRQ_U300_I2C1 42
#define IRQ_U300_RTC 43
#define IRQ_U300_NFIF 44
#define IRQ_U300_NFIF2 45
#endif
/* DB3150 and DB3200 have only 45 IRQs */
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
#define U300_VIC_IRQS_END 45
#define U300_VIC_IRQS_END 46
#endif
/* The DB3350-specific interrupt lines */
#ifdef CONFIG_MACH_U300_BS335
#define IRQ_U300_ISP_F0 45
#define IRQ_U300_ISP_F1 46
#define IRQ_U300_ISP_F2 47
#define IRQ_U300_ISP_F3 48
#define IRQ_U300_ISP_F4 49
#define IRQ_U300_GPIO_PORT3 50
#define IRQ_U300_SYSCON_PLL_LOCK 51
#define IRQ_U300_UART1 52
#define IRQ_U300_GPIO_PORT4 53
#define IRQ_U300_GPIO_PORT5 54
#define IRQ_U300_GPIO_PORT6 55
#define U300_VIC_IRQS_END 56
#define IRQ_U300_ISP_F0 46
#define IRQ_U300_ISP_F1 47
#define IRQ_U300_ISP_F2 48
#define IRQ_U300_ISP_F3 49
#define IRQ_U300_ISP_F4 50
#define IRQ_U300_GPIO_PORT3 51
#define IRQ_U300_SYSCON_PLL_LOCK 52
#define IRQ_U300_UART1 53
#define IRQ_U300_GPIO_PORT4 54
#define IRQ_U300_GPIO_PORT5 55
#define IRQ_U300_GPIO_PORT6 56
#define U300_VIC_IRQS_END 57
#endif
/* The DB3210-specific interrupt lines */
#ifdef CONFIG_MACH_U300_BS365
#define IRQ_U300_GPIO_PORT3 35
#define IRQ_U300_GPIO_PORT4 36
#define IRQ_U300_WDOG 37
#define IRQ_U300_EVHIST 38
#define IRQ_U300_MSPRO 39
#define IRQ_U300_MMCSD_MCIINTR0 40
#define IRQ_U300_MMCSD_MCIINTR1 41
#define IRQ_U300_I2C0 42
#define IRQ_U300_I2C1 43
#define IRQ_U300_RTC 44
#define IRQ_U300_NFIF 45
#define IRQ_U300_NFIF2 46
#define IRQ_U300_SYSCON_PLL_LOCK 47
#define U300_VIC_IRQS_END 48
#define IRQ_U300_GPIO_PORT3 36
#define IRQ_U300_GPIO_PORT4 37
#define IRQ_U300_WDOG 38
#define IRQ_U300_EVHIST 39
#define IRQ_U300_MSPRO 40
#define IRQ_U300_MMCSD_MCIINTR0 41
#define IRQ_U300_MMCSD_MCIINTR1 42
#define IRQ_U300_I2C0 43
#define IRQ_U300_I2C1 44
#define IRQ_U300_RTC 45
#define IRQ_U300_NFIF 46
#define IRQ_U300_NFIF2 47
#define IRQ_U300_SYSCON_PLL_LOCK 48
#define U300_VIC_IRQS_END 49
#endif
/* Maximum 8*7 GPIO lines */
......@@ -117,6 +117,6 @@
#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
#define NR_IRQS (IRQ_U300_GPIO_END)
#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment